Chimney-convector "Termofor": reviews. Chimney-convector for the bath with your own hands

The company "Termofor" began production of modular chimney systems in 2012. Today, the products have found their customers and has become quite popular. Already at the first stages of development the company used modern technological lines, which provided automatic cutting of the material. In the production process, welding and forming techniques were used.

The man influenced the manufacture minimally. All elements were connected with each other with the utmost precision, each of them still meets the requirements of interchangeability. Chimney-convector "Termofor" passes 100% quality control, which allows the manufacturer to give a long-term guarantee for the products. On each product you can find the company's barcode.

Reviews about the chimney "Rambo"

In the product line, a lot of chimneys-convectors, each of which has its own diameter, wall thickness and nodes in the base. For example, if you have a thermometer "Rambo" with a diameter of 120 mm, then its mass is 4.8 kg, and the core will be based on heat-resistant steel.

The overall dimensions of this product are 200 x 200 x 1000 mm. This chimney-convector, the feedback about which you can help to make the right choice, is used for accelerated heating of the room, which is provided by the selection of the heat of the flue gases leaving outwards. To protect infrared radiation, this equipment is suitable as well as possible. After all, from the chimney emanates a powerful heat. This element is most often used with bathing, but in some cases it can be found in a structure with heating ovens.

This convector differs original design, because consumers often compare it with analog products. According to users, convective holes in the case contribute to more intensive passage of air currents. This chimney-convector has a long service life, this, according to the owners of suburban real estate, is ensured by the fact that the product is based on highly alloyed corrosion - resistant steel, in which the chromium content is not less than 13%. The outer casing has a thickness of 0.5 mm, while the inner tube thickness is 1 mm.

Feedback about the heater natrubnom for adjacent rooms

The company offers for sale also a chimney-convector for adjacent rooms, which is an annular heater. It is used for accelerated heating of neighboring rooms, which is ensured by the selection of heat from flue gases. Consumers like that the weight of this device is not so great and is only 3,6 kg, the diameter of the chimney is standard and equal to 115 mm.

Buyers emphasize that accelerated warming up of adjacent premises is guaranteed, because the design has convective holes. Ideally, this system is suitable for the furnaces of the company "Thermofor", however, according to the buyers, this device can be used with other similar products. This chimney-convector will last a long time, because the manufacturer gives a guarantee for one year. This, according to users, speaks of high quality. You can buy these devices for 5000 rubles.

Making a chimney-convector by one's own hands

Gas convection type chimneys have a fairly simple device and are a pipe of impressive diameter with reinforced pockets on it, which are made of pipes of smaller diameter. If you know how to use a welding machine, the work will be carried out. At the first stage, it is necessary to take a pipe whose diameter corresponds to the outlet opening of the furnace. From it you need to cut a long chimney-drain pipe. The average length should be 55 cm.

If you decide to make a chimney-convector with your own hands, then the next step is to take a 5-mm pipe, which is cut into six pieces, the length of each section should be 45 cm. Next, the master should weld the resulting blanks to the main pipe so that the system forms a full circle . At this stage, we can assume that the convector is ready. Now it should be connected to the pipes.

Advice of a specialist

After you managed to make a chimney-convector for a bath with your own hands, it is recommended to paint it for the best heating. And if you want to achieve a more aesthetic appearance, the design is closed with a cover made of galvanized sheet or metal.

Manufacture of stainless steel chimney-convector

If you decide to use stainless steel for work, you should buy a thick pipe from it and a sheet. With the help of riveting, you need to fix a sheet of large waves to the main pipe. On this we can assume that the convector is ready. The chimney-convector will only be connected to the chimney.

Due to the fact that such a system made of stainless steel is easy to make, many home masters stop exactly on this option. The air that comes from the furnace through a large pipe will heat the streams that enter your pocket. Outside the mass will come out already hot.

Positive feedback on convection chimneys

Advantages of chimneys in the form of convectors are estimated by many consumers. According to customers, they are fairly easy to install, and in operation they are safe, and also have a high efficiency. For installation, the chimney-convector will only need to be connected on one side to the furnace tube, while the other element is attached to the exiting flue.

If you want to increase the efficiency of the design, you can supplement the system with a vertical and horizontal convection chimney. Safety, according to users, is ensured by the fact that all combustion products are taken out to the street through the chimney. A high efficiency is guaranteed, because the heating of the air in the room occurs quickly and with minimal energy consumption.

Conclusion

If you still decided to abandon the self-manufacturing of the convector chimney, then on sale you can find a suitable solution, which is manufactured by the company "Termofor". As an example, we can consider a chimney-convector-1, which costs 4000 rubles. It is made of heat-resistant steel.

This product is a pipe module that is completed with stainless steel tubes with round decorative pads. In the serial production there are two models of convectors: a chimney-convector-1 and a chimney-convector-2, each of which is intended for one or two rooms adjacent to the heated.