Homeliness, Tools and equipment
Nozzle for car polishing on the drill with your own hands
Cars at exhibition events are poured under the lighting of lamps and searchlights, and their surface is distinguished by a bright luster. This effect gives the polishing of the body. It can be done at home. To do this, you need a drill and a nozzle for polishing.
Varieties
There is a wide range of nozzles that are suitable for various surfaces, the most common are sponge, abrasive, having a different degree of granularity and felts with a soft surface. Conditionally they are classified according to the version of execution on the petal and surface grinding types. The latter are made in the form of a rubber circle (it is also possible to use this material partially) with an additional coating for processing.
They are made, as a rule, from a dense foam or felt of various diameters. The petal nozzle for polishing is characterized by greater productivity and, as a result, high cost. Also, you can find kits for body surface treatment, which consist of several elements that have different purposes and complexity of execution.
The form
Nozzles for car polishing are usually performed in the form of a cone or circle. They often go in addition to polishes, along with polishing ribbons and sheets. There are many options that are used for both bodywork, and for jewelry or optics.
Thanks to such elements, the aesthetic and technical characteristics of the car are maintained, as any vehicle will look much better after thorough washing and polishing.
Rigidity
A conventional drill often acts as a grinding machine. But it is able to provide quality work only if supplemented with suitable components. For polishing wheels are used a variety of materials. The most common nozzle for a drill is for polishing a car from felt or foam rubber. The choice of this or that option is determined by the degree of softness of the polishing paste. Manufacturers produce circles in various colors, in accordance with their rigidity:
- The most soft is the black polishing nozzle;
- For all types of pastes, orange elements are suitable;
- Rigid compounds are used with white circles.
Nozzles for polishing your own hands
Sometimes you can not find a suitable option in the store, in this case, in the presence of a rigid circle, you can make a soft thick layer and place it between the Velcro and the base of plastic. With the help of a clerical knife, the Velcro cuts off, where a soft layer is adhered, which is the usual bath sponge. It is worth noting that in the course of the work, it is possible to shift the individual elements and, as a consequence, a violation of the general symmetry.
Also, a convenient drill bit for car polishing is obtained from a felt disc used in polishing machines and machines. First you need to make a rod with a suitable diametrical size and apply thread to one of its sides. It secures the polishing disk, surrounded on both sides by a wide nut and a restrictive washer. The formation of such a device is not particularly difficult, and it is suitable for processing many types of surfaces.
Features of use
Progress does not stand still, and the drill bit for polishing today is presented in various designs. Constantly there are new compositions for production, characterized by a lower cost, but their reliability and quality remain at a high level. Adaptations are realized in any shops in which the automobile goods are presented. It is worth taking care when choosing, because you can easily make a mistake, and as a result, the purchase will not be suitable.
Body elements of new cars are made according to the latest technologies. On the metal surface, anticorrosive compounds and paints, which are resistant to wear, are applied. Their warranty period of operation is about 15 years. But the paintwork better retains its characteristics with appropriate care. The nozzle for polishing the car allows you to restore the original shine, remove the shortcomings available on the surface, while they, along with specialized compounds, will cost much cheaper than going to the workshop.
When you need polishing
Such processing, in spite of many positive aspects, can correct only a limited list of defects. Without major repairs, bodywork components are indispensable if they have foci of corrosion, chips or damage through which the steel frame is visible. Before starting work, it is worthwhile to carefully inspect the machine and make sure of the possibility of eliminating the shortcomings. The nozzle for car polishing on a drill will be effective in the following cases:
- A slight difference in shades obtained after partial staining;
- Presence of granularity and streaks of enamel composition;
- Surface has roughness, scratches and cloudy stains;
- The paint layer became less bright and shiny.
What allows to reach the nozzle for polishing
Polishing allows you to give an updated look to the body. Carrying out such processing is especially important when aligning small chips and in case of fading of the surface. Works are carried out in two stages. First, the surface layer of the paint is removed, after which the polishing compounds are applied.
There is also a protective treatment, which is used to reduce the negative impact of various precipitation and ultraviolet radiation. Most often it is included in the pre-sale preparation of the machine. The protective coating is distributed over the entire surface and can have a different composition with the addition of components such as silicone or wax. They form a water-repellent invisible film and provide a bright shine. A soft drill bit for polishing is suitable for used cars, on the surface of which there are no damage to the paint and varnish layer. Also it is used in a gentle treatment with protective agents.
Polishing agents
Before you start to restore the surface, you should take care of the availability of necessary materials, such as:
- sandpaper;
- Bike;
- Foam rubber;
- Compositions for grinding;
- Polishing.
Care should be taken to select the treatment agents. Pastes with abrasive particles are necessary for removal of the top lacquer layer. They are selected in accordance with the type of cracks and chips on the surface. Preparations with a large number of particles are indispensable when eliminating noticeable defects. The compositions that give brightness to the color are quite common.
On the protective coating of new cars often there are cloudy divorces, in this case, you can do with the paste for restoration, in the composition of which there are no grinding additives.
The variety of polishes allows you to choose the right tool for any task. For vertical surfaces, thick pastes are convenient. They can handle any part of the car. Such tools are often characterized by the presence of components that increase the brightness of the hue.
Polishes with a liquid consistency are suitable only for a horizontal plane, for example, for a hood or a roof. The main advantage is the absence of possibility of damaging the enamel.
Aerosols are characterized by sufficient convenience in operation. Such compounds are economical and effective in work. But it is worth noting that the cans, despite their size, do not contain much material.
Similar articles
Trending Now