HomelinessRepairs

Artens (laminate): reviews, photos, sizes, styling, production

If you want to choose a floor covering, then you can pay attention to the brand Artens. Laminate of this manufacturer is made by several popular European companies, among them: Kronostar, Lassen, Egger, and Spanolux SA.

If you want to buy a durable material that will be ready to serve up to 30 years, you should choose your choice for the decor, which is produced under the brand name "Artens" in Germany. Reviews about this product are mostly positive, consumers especially note the affordable price, good quality and excellent appearance. However, before acquiring, you must personally become familiar with the integrity of each panel, as some of them may prove to be defective.

Characteristics of the variant "Oak Byzantine"

The company Artens (the laminate of its manufacture we will describe in the article) offers its customers a variety of options for this flooring. One of the varieties is "Byzantine Oak", the thickness of which is 10 mm.

This material is of high quality and is made on the basis of a high-density fibreboard . Thanks to this manufacturer it was possible to obtain products that correspond to the class of durability 33.

This floor covering is intended for installation in commercial and residential premises, the surface can be subjected to any degree of load. Cloths perfectly imitate the natural texture of the parquet, and care for laminate is easier than some alternative options.

Production features

Artens Laminate, whose production is carried out in the plant, using high-tech equipment, is made of fibreboard. It provides the products with special strength and rigidity.

On top of it is laid a paper layer, equipped with a polygraphic pattern, namely it imitates parquet from natural rocks. Then comes a special protective layer, and melamine or acrylate resin is applied to the paper.

By the way, if you want to choose products that differ in hardness, then you should prefer a laminate, which uses corundum as the surface layer.

Dimensions of Artens Laminate

Artens laminates, the sizes of which can be very different, have a thickness in the range of 7 to 12 millimeters. For sale, you can find panels with dimensions of 1292x192, 1285x194, and 1285x191 mm.

Selecting a suitable floor covering for yourself, remember that on thicker laminate boards the legs of the furniture leave no traces, in addition, such a floor is usually warmer, and its elements are easier to stack.

Positive reviews

If you are considering as an option for floor covering Artens laminates, you should first get acquainted with the positive and negative reviews about it. Perhaps, the opinions of users will allow you to understand whether it is worth buying this trim for your home.

So, according to some home masters, the operation of the described laminate is quite pleasant. On an independent laying will take quite a bit of time. If you do not have the appropriate skills, then it will take several days.

The named floor passes for many owners of houses and apartments a test for durability for many years, due to which they were convinced that initially a brilliant and bright surface, does not lose its original attractiveness and in the process of exploitation.

Laminate Artens, reviews about which can be very different, still has additional advantages in the form of affordable price, as well as smooth and clear lines of each product. After stacking, it retains a noble appearance for a long time.

So, if you want to find quality and beauty in one coating, then it is worth choosing an Artens laminate. This is the opinion of many users who have already changed the floor in their homes. It is noteworthy that the manufacturer provides for the sale of products of two classes of durability, thus saving, if the floor in the room is not subjected to heavy loads.

Negative feedback

But the Artens laminate, which reviews must be read before going to the store, may also have some drawbacks. A number of buyers noted that when purchasing material the colors of the finishes in some packs are different, which is why it is recommended to check the conformity of the shades even in the store.

Sometimes it happens that there are no drawings on the edges of the boards, this can be considered a marriage, which allows you to return the lining to the store. According to buyers of floor covering Artens, laminate of this company often sins with defective products, they, incidentally, are not always possible to notice at the time of purchase. If you bought the material with a margin, then this may solve the problem, but it also happens that the finish is bought in another city or is purchased to order. In this case, it is not possible to change the products.

Stacking

Now we will clarify what will be required to carry out the installation of the laminate. The list will include:

  • primer;
  • Expanded polyethylene;
  • Wedges for arrangement of technological gaps;
  • Fasteners for plinth;
  • The baseboard itself.

You should prepare a plastic film, as well as glue. On sale you can find wedges that are intended for laying laminate, this solution can be called affordable and cheap, as well as crosses used for laying ceramic tiles. As an alternative solution you can apply pieces of plasterboard, laminate cuts or wooden pegs, however in any case the dimensions should be the same, and the width should not exceed 10-15 millimeters.

Artens laminate, the photo of which is presented in the article, does not fit with the use of glue, this compound is useful only to fasten the elements in the places where the lamellae will be cut and the locking joints will be removed.

It is important to take care of the availability of appropriate tools, namely:

  • A construction knife;
  • Electric jig saw or hacksaw;
  • Hammer;
  • A building corner;
  • Roulettes;
  • Pencil;
  • A wooden bar (it will be needed for punching slats).

Workflow

The base will need to be cleaned of dust and debris. If possible, it is best to use a construction vacuum cleaner.

The surface is primed, as far as not only the concrete screed, but also the wooden floors. The latter option is additionally treated with fire retardants and antiseptics.

On the cleaned surface waterproofing is laid, the material should be located with an overlap of 20 centimeters. The resulting joints need to be glued with adhesive tape.

At the next stage foamed polyethylene is laid , and the laminate is installed from the source of natural light, that is, from the window opening. Substrate under the laminate can be located only on the floor where the flooring is done, and after the material is laid as the work progresses. This will preserve the purity and integrity of its surface when self-packing.

Advice from a specialist

Laying of Artens laminate provides for the use of a substrate, which should go to the walls by 3 centimeters, which will allow to form a shock stripe. The subsequent strips of polyethylene are laid back to back, and then pasted with adhesive tape.

Laying begins with the installation of the first lamella, which will be located in the corner of the room from the side of the window. Between this element and the wall, pegs should be installed, as well as the end part. Further lamellas are installed in a row by solid elements, and it is important to make the correct connection.

At the ends there are grooves in which each next panel is wound at a small angle (with no significant effort to apply it is not necessary), then you should use a special hammer. If the row does not contain a whole piece in the completion of the laying, then it is necessary to fill it with a piece.

The second row starts with a piece that is left from the previous row, but only if its size is less than 30 centimeters. Otherwise, cut half of the new panel. Elements of the second row should be stacked initially without using a lock with the first row, you only need to touch the edge of the end. As soon as the second row is ready, it needs to be lifted, and then turned to the lock until it stops and click into place.

Conclusion

If you have already decided that you will choose Artens products, the laminate of this manufacturer must undergo acclimatization before starting work. To do this, it should be left for a day indoors. Artens Laminate according to the method of laying does not differ from similar flooring of other manufacturers. And if you have not previously engaged in such manipulations, then be sure to learn more about the laying technique so that your floor becomes an ornament of the whole room.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.