EZ-200, fiberglass: technical specifications, certificate

The modern consumer knows such products as the EZ-200. Glass fiber of this brand belongs to the group of heat-insulating materials, which consist of twisted glass-wools of aluminum-borosilicate glass, the diameter of which can vary in the range from 0.1 to 20 microns. In the manufacturing process, a paraffin emulsion is added to these filaments, which acts as a lubricant. On the looms we interlace yarns, as a result of which it is possible to obtain a web that is chemically resistant and does not burn. It does not wear out and does not decompose.

Specifications

EZ-200 is a fiberglass fabric that has high strength, it is able to maintain dimensions during processing and operation, the material well resists punching. It is non-toxic, non-explosive, able to withstand high temperatures and does not ignite. Fiberglass is absolutely environmentally safe, and among its main characteristics can be identified thickness, surface density, as well as breaking load.

The first parameter is equal to the limit of 0.190 mm, it can be changed in both directions by 0.01 mm. The surface density is measured in g / m² and is equal for this glass fabric 200. In the upward direction the parameter can vary within 16, while in the direction of decrease it is within 10. Builders are often interested in breaking load. On the basis and by weft this parameter can be equal to 1127 and 1078 N (kgf), respectively. You may also be interested in the density of the fabric on the basis and on the weft, in this case the parameters are 10 and 9 threads per centimeter.

EZ-200 is a fiberglass fabric that has a width of 95 cm, while the length of the roll is 150 m. The interlacing is linen, the kind of sizing is a paraffin emulsion. The warranty period of storage of this material from the date of manufacture is 2 years. Mass fraction of the substance is not less than 1% with calcination.

Scope of use

Heat-insulating fiberglass is used as an independent material. Predominantly it serves as a thermal insulation for boiler houses, pipes, and gas turbines. It can also be used as a thermal insulation, in the form of a cover layer.

The named fabric is used for making clothes for metallurgists, electric welders and firemen, and in the chemical industry, filters for toxic gases, acids and alkalis are made of the material. Fiberglass is used in the role of the basis for the manufacture of fiberglass of various purposes and types, while the material is impregnated with different resins.

In addition to the application

EZ-200 - fiberglass, which is the basis of body parts, namely cars, boats and boat elements. It also acts as component parts, where the chemical stability of materials is important. This includes the production of tanks, tanks and pipes, which are used in the chemical industry. Used for electrical insulation materials of printed circuit boards, in addition, it serves as the basis for the circuits of radios, instruments and computers.

The glass fabric is glued with mica on the organosilicone varnish, the material undergoes pressure at the next stage, as a result of which it is possible to obtain an electrical insulating structural material that is widely used in all directions of the power industry. Fiberglass EZ-200, the characteristics of which are presented in the article, is used for the manufacture of elements at home, it is used for repair of damaged body parts and bumpers of machines. If you have a fiberglass of this brand and epoxy, you will be able to repair parts of any shape.

Use in construction

Fiberglass EZ-200, the technical characteristics of which were presented above, is used in construction. One of the products that is made of fiberglass is fiberglass reinforcement. It was developed as a replacement for steel reinforcement.

For a long time, steel acted as the only material that has the necessary properties, namely, durability and strength. Since there was no alternative, we had to put up with the shortcomings of steel. However, the development of technologies made it possible to manufacture materials with inaccessible properties. That, in turn, allowed to change the standards of production of building materials.

In place of steel came the fiberglass composite reinforcement. It has high reliability and strength, low weight and is not corroded. In addition, it is resistant to adverse effects of moisture, is characterized by low thermal conductivity and does not conduct electricity. Among the additional qualities - chemical inertness.

Fiberglass in the form of an additive

Fiberglass EZ-200, the certificate of which you can find in the article, is the basis of the glass fiber, it is added to the concrete mixes, and it fulfills the role of the fastening element.

The usual concrete mixture shrinks when hardening, and as a result, microcracks appear. This can adversely affect the quality of structures and their durability. If the fiber is added to the solution, the fresh concrete will not be covered with cracks when hardening, since the fibers of the glass fibers stop the germination of defects in the early stages.

Manufacturers and government standards

Fiberglass EZ-200, GOST is as follows: 19907-83, manufactured today by many companies. Among others, one can distinguish "Polotsk-fiberglass". This manufacturer is today one of the leading manufacturers of fiberglass and products based on it in the world.

The plant was founded in 1957, and in January 1965 its second stage was launched, which had a full production cycle from production to processing into fiberglass cloth. This industrial complex has an area of 1 million square meters, it has equipment that numbers more than 1,000 units.

If you need fiberglass EZ-200, Yaroslavl can also offer your goods. In this city there are many companies that represent the sale of the described products. For example, the plant "Range" produces a glass fiber in assortment. While "KSM" offers consumers a glass cloth of standard width. It is impossible not to mention also "TK Energokomplekt", which produces insulating, roofing and other building materials.

Alternative ways of using fiberglass

Fiberglass EZ 2 200, the technical characteristics of which you will need, if you plan to purchase this material, is used today in other areas. Depending on the thickness of the material, consumer goods are manufactured from it. Here you can include:

• Plumbing parts;
• Goods for recreation and sport;
• Boxes and containers;
• Medical products;
• Various types of tubes for household use;
• Electrotechnical products.

As for plumbing parts, it can include septic tanks, pool basins, dry closets and shower cabins. If you are interested in goods for recreation and sports, among them you can distinguish oars for rowing, fishing rods, as well as ski poles. Containers have found their application as containers for household solid waste. In dentistry, fiberglass is used in the role of seals, as well as non-removable prosthetics and ribbons for splinting teeth.

Fiberglass E3-200 is actively used in orthopedics - from the nasal material are made canes, prostheses and crutches. But in everyday life fiberglass is used to make antennas, flagpoles and holders. But this list can not be called complete, with each day the areas of use of fiberglass are expanding, the material covers new areas of activity.

Production features

A continuous fiberglass fiber is formed by drawing molten filaments from the glass melt. In this case, spinnerets are used, and the number of holes can vary from 200 to 4000. In this case, mechanical devices are used, the fiber is wound on a bobbin. The diameter of the fiber will depend on the diameter of the spinneret and the drawing speed.

The process can be conducted in one or two stages. In the first case, the fiber is drawn from the glass melt and comes from the glass melting furnaces. In the second, pre-prepared balls of glass, bars or ercules are used. The latter are pieces of fused glass, which are obtained in furnaces or glass melting units, called vessels.

If we are talking about staple fiberglass, then it is formed by blowing a jet of glass, which is affected by steam. Hot gas or air can be used.

For reference

Fiberglass EZ-200, whose manufacturer can be chosen by yourself, has a certain tensile strength, this parameter is affected by microscopic scratches and defects on the surface. For structural purposes, as a rule, glass is used, the tensile strength of which is 50 MPa. The glasses have a Young's modulus within 70 GPa.

Cost of fiberglass

Fiberglass fabric E3-200 is sold at a price of 30 rubles. Per square meter. It is a white fabric, which consists of the finest fiberglass. The material is wound on a paper-bakelite sleeve or wooden roller. Foam is packed in polyethylene film, which facilitates transportation.

It is possible to produce fiberglass with coloring in different colors. It can be used as a coating material in an untreated or impregnated form. You can apply them for thermal insulation of pipelines, boiler plants and gas turbines, as well as in the role of a shell in the manufacture of thermal insulation mats based on basalt. Applied fiberglass indoors and outdoors, as well as underground.

Conclusion

Fiberglass is now used universally, which is due to its unique characteristics, among them high strength, fire safety, dimensional stability, as well as significant elongation at break. The structure is filled, the material is characterized by moisture resistance and high rigidity. You can rely on thermal and chemical stability.