Xerox 3100: good entry-level MFPs

Xerox 3100 без особых проблем реализовывать функции системы документооборота в офисе или же рабочей группе с 10 рабочими местами. An acceptable combination of democratic value and advanced technical specifications allows the Xerox 3100 without any problems to implement the functions of the document management system in the office or a working group with 10 workplaces. Also, the pluses of this model MFP rightfully own high speed and minimized printing costs or copying. It is about this peripheral device that will be discussed in the material you are offering.

Where such an MFP is best used? What is included in the package?

Resource for printing for this universal solution is declared by the manufacturer at the level of 10,000 one-sided copies per month. Experience shows that such a volume is more than enough to create small local or network print subsystems. This can be an office or even a workgroup, but in any case, the number of jobs with personal computers in this case should not exceed 10. In practice, you can use such an MFP in a large office, but in this case it will be necessary to already purchase several peripheral solutions . The list of components consists of the following components:

• Multifunctional device of economy class with laser printing technology and increased monthly output of documentation.

• Starter cartridge.

• Software that is recorded on a CD. In addition to the usual drivers in this situation, the manufacturer did not forget to include also various service and diagnostic software.

• Power cord and computer communication cord.

• 3100, инструкция по настройке и гарантийный талон . The documentation for this MFP consists of components such as the Xerox 3100 User Guide, the setup guide and the warranty card .

имеет безупречную комплектацию, которая позволяет сразу же после покупки использовать его для создания системы печати или сканирования. This MFP has an impeccable package that allows you to use it right away after purchase to create a printing or scanning system. Another possible way to use it is a multiplier.

Speed. Carrier

Typical printing speed for the solution in question, as for a budget multifunction device. He needs 21 seconds to warm up. The output of the first page will already need 8.5 seconds. But the output speed A4 is 20 sheets per minute. In turn, the Letter format is 21 pages. The largest size of the carrier is limited to the previously mentioned A4. Also in this list there are A5, A6 +, A6, Letter, B5, C5 and B6. ² , а наибольшее – 162 г/м ² . The smallest permissible value of the manufacturer's claims is 52 g / m ² , and the largest is 162 g / m ² .

ошибке Xerox 3100 . The output of paper weight beyond these limits can lead to a Xerox 3100 error . The device is then blocked, and printing will not be possible until the feed system is cleaned. The identical resolution of output documentation in both printer mode and copier is 600x600. The hardware resolution of the scanner is 2400x2400. In turn, the presence of interpolation technology allows the latter value with the help of software to increase to 4800х4800.

Communication capabilities

Xerox 3100 . Not so simple and with a list of communications in the Xerox 3100 . Initially, out of the box there is only a USB port in it. It is universal and is present in most modern computers. Its key disadvantage is the inability to implement the printing system functions when the computer is turned off. There is also the possibility of organizing a connection over Wi-Fi. But in this case it is necessary to purchase an additional wireless communication unit.

Customize

настройка Xerox 3100 , не требует специальной подготовки и достаточно простая. Such an operation, like setting up the Xerox 3100 , does not require special training and is fairly simple. With her on forces to cope even the beginner in the world of computer technologies. It consists of the following stages:

1. We install the MFP as close as possible to the system unit of the computer from which it is planned to manage it.

2. We connect the multifunctional device to the AC mains and to the computer with the help of complete wires.

3. We run on the PC the process of installing drivers and other related software.

4. After the appearance of the request, which requires the inclusion of the MFP, we press the Power toggle switch.

5. At the end of the software installation process, restart the PC.

6. At the final stage we print a test page.

The above algorithm is relevant for connecting to a wired USB interface. If you plan to use Wi-Fi, the configuration procedure is complicated because it is necessary to set the network settings in the MFP. Otherwise, the configuration order does not change significantly.

The cost. Noise and power consumption

Xerox 3100 варьируется в пределах от 8000 до 10000 рублей. At the moment, the cost on the Xerox 3100 varies from 8000 to 10,000 rubles. One of the main disadvantages of the model of the peripheral device under consideration is a high noise level and an overestimated power consumption. Even in standby mode, this MFP produces a noise level of about 30 dB. In the same printing mode, this value is generally increased to 53-63 dB. As a result, this peripheral solution can not be named accurately. In standby mode, this MFP consumes 12 watts, and with this somehow you can be reconciled. But when printing or copying energy consumption increases to 340 watts, and this value is too high for entry-level multifunction devices.

The drawbacks and strengths of the solution under consideration. Reviews

МФУ Xerox 3100 – это высокий уровень шума и завышенное энергопотребление. The main disadvantages for the Xerox 3100 multifunction devices are high noise level and overestimated power consumption. It is on these two features that attention is focused in the reviews. To pluses in this case it is possible to attribute speed, simplicity of adjustment and democratic cost. As a result, it can be noted that this MFP is a typical representative of budget devices.

Results

отлично подходит для реализации малых систем документооборота. The Xerox 3100 is great for implementing small workflow systems. At the same time, very mediocre requirements are put forward for the quality of printing. It is in such cases and the most justified use of such a peripheral device.