MFU Kyocera Taskalfa 180: specifications and reviews (photos)

Multifunctional device based on laser printing technology and with impeccable technical specifications and characteristics to date - this is all entirely true for the Kyocera Taskalfa 180 . речь в материале, который предлагается вашему вниманию. It is this universal device that will be discussed in the material that is being offered to your attention.

Positioning

The manufacturer himself refers the Kyocera Taskalfa 180 to universal printing, copying and scanning entry-level solutions. In the realities of Western business, such positioning of this product is fully justified. среднему или премиальному уровн ям . But in domestic conditions, it is better to attribute this MFI to the average or premium levels . подобное многофункциональное устройство. It is for covering the workflow within such business institutions that such a multifunctional device will perfectly fit .

Another possible area of use for such MFPs is the printing and copying centers. In the latter case, if not completely, then most of the need for printing and copying such an institution will certainly close such a device. In other cases, it is not entirely rational to use this modification of the MFP. For example, at home, the cost of both the device itself and the consumables will be a deterrent. But for a large organization, the problem may be the insufficient volume of monthly printing, and in this situation it is necessary to buy a more expensive model of multifunction units with an increased monthly limit in the number of pages printed.

Equipment. Its sufficiency

Of course, the pluses of this model of a multifunctional device can be attributed a complete set. Moreover, it is so well organized and thought out that it allows immediately after the acquisition to use for its intended purpose the universal solution under consideration. In it, the manufacturer included the following:

• The list of documentation in this case is represented by components such as the warranty card and, of course, the instruction.

• Kyocera Taskalfa 180.

• Starter cartridge with reduced print volume.

• Branded interface cable for direct switching from PC.

• Cable for the organization of power supply MFP.

• Disk with software.

Paper and everything connected with it

A nice plus of Kyocera Taskalfa 180 is also a list of supported page formats. In this case, the manufacturer increased the possible print area to A3 dimensions. That is, the hero of this review can even print small drawings. же перечень форматов в этом случае дополнен стандартными и привычными для большинства А4, letter, A5 и B5. Also the list of formats in this case is supplemented with the standard and familiar for most A4, letter, A5 and B5. к этому списку добавляются и компактные размеры стандартных конвертов. In addition to this list are added and compact sizes of standard envelopes. Well, for maximum user convenience, the developers of the MFP have provided the possibility of output on a sheet of paper with arbitrary sizes. This possibility is implemented in its drivers. ² . The minimum paper weight is 60 g / m ² . Do not print on poorer paper: the device may be damaged. ² . Well, the maximum density of sheets in this case is 160 g / m ² . That is, this MFP can even print on the paper, which is convenient when drawing small drawings.

Speed specifications

To warm up this multifunctional device you need to spend 17.2 seconds. After that, regardless of the mode of operation (copier or printer) and the size of the printed page, the MFP will spend 5.7 seconds on the first page. Again, any format. 8 pages within a minute can be obtained on this universal apparatus of A3 or 18 format, but already A4. When copying the same speed is reduced by the human factor, and as a rule, at best, these characteristics are reduced by 2 times to 4 sheets of A3 or up to 9 pages of A4 format. Similar performance is a multifunction device demonstrates in scanner mode, and in this case, as in the case of a copying machine, the restraining moment is the same human factor.

Resolution

On the one hand, the resolution of 180 documents printed on the MFU Kyocera Taskalfa can be called modest by today's standards. Its maximum value is 600x600. But it is necessary to take into account the fact that the page output mode in this case, as was noted earlier, is monochromatic. As a result, the quality of printing in this mode and with such formats in this situation is simply excellent.

Interfaces

Two main switching interfaces are equipped with the hero of this article. The main one is RJ-45. With the help of this MFP can easily connect to a computer network and assign it the functions of a scanning and printing server. The backup method of connection in this case is USB. In this case, the MFP management is already transferred to the nearest PC. This solution is not very convenient for the reason that the system unit of the computer must be constantly turned on and the increased amount of information processing falls on it.

Cartridge

Only in monochrome mode can the hero of this article print, and only one cartridge is a part of the Kyocera Taskalfa 180. The TK-435 cartridge can be used in this MFP to perform the output functions of documentation. One refueling should be enough to receive about 1000 copies, and the recommended monthly load is 20,000 pages. From these two numbers it is not so difficult to determine that the maximum number of cycles for its refilling is 20.

Software component

The undeniable advantages of this MFP include an impressive set of drivers. And besides the usual and most common "Windows" and MacOS in this list is also "Linux". As a result, it turns out to be an ideal peripheral device that can interact with almost any current system software to date. To this, it is necessary to add what is available both as a version for 32-bit operating systems, and for 64-bit operating systems.

Price

In one case the printer, scanner and photocopier Kyocera Taskalfa 180 unites, and it can be bought for 12 000 - 13 000 rubles. Taking into account the previously mentioned technical characteristics and capabilities, this is indeed a fully justified cost. выводимой на печать документации в месяц. Moreover, the product in question can boast an impressive amount of printed documents per month. Yes, and the communication kit in this situation does not cause criticism. That is, it is a balanced solution that stands out among the solutions of this class.

Reviews

Judging by the reviews, the Kyocera Taskalfa 180 can boast the ideal parameters and capabilities. The 220th model of the same multifunction printer of the same manufacturer may be preferable due to the increased monthly volume, but the price is also much higher. Therefore, the hero of this article can boast the most optimal monthly volume of printing. And it is on this important feature that specialists in their reviews emphasize their opinion.

Results

Certainly, Kyocera Taskalfa 180 for its niche is an excellent and balanced solution, which certainly does not have weaknesses and any significant flaws. But the number of advantages he has against the competition really goes off the mark. This is a communication list, and performance, and support for A3 format, and the ability to print up to 20,000 copies per month.