Why do you need bicycle catapults?

Owners of bicycles that prefer night driving are seriously at risk of getting under the wheels of the car, if there are no identification beacons on the bike. Street lights illuminate the bike lightly. To protect themselves from trouble let the cataphores on the bike.

Appointment

Catafoty on a bicycle must be presented in the kit. Traffic rules require the installation of a white front and red rear reflective means on the bike, as well as yellow beacons on the pedals and spokes of the bike.

As two-wheeled vehicles are barely visible on the road, a bicycle cataphot can improve safety during driving. Naturally, the reflectors do not emit light on their own. Therefore, it becomes noticeable only when aiming the car headlights.

How to remove catapults from a bicycle? Such a need often arises when it is necessary to reduce the overall weight of the bike, as well as to improve the balance of a two-wheeled vehicle with a speedy ride along the road. In fact, in the presence of standard fastenings in the form of a bolt with a nut to cope with the task is not difficult. However, some cataphores, especially reflectors that are located on wheels, are not easy to clean. To do this, you have to remove the knitting needles or damage the fastening of the products.

Keyophytes on spokes

Many cyclists consider the reflectors that are mounted on the spokes of the bike, quite useless and even unnecessary accessories, since the latter worsen the wheel alignment. In theory, the excess weight of even a few grams can create some imbalance in driving. However, this significantly affects the quality of movement only with the development of maximum speeds.

Retro-reflective elements on the spokes of the wheels several times increase the safety level of the lover of night trips. In addition, they are an excellent decoration for a bicycle in the dark.

How to install catapults on a bicycle? For this, reflective elements are provided with special connectors that engage the spoke of the bicycle.

Bike catapults with LED

When rainy weather or space is misty in the street, reflective means do a poor job of coping with the tasks assigned to them. To avoid trouble, it is enough to install LED catapults on the bike. Photos of similar devices can be seen in this material.

Such luminous reflectors can be seen from a considerable distance in the worst weather. However, their operation requires a connection to the power supply. Experienced cyclists prefer to ride with a flashlight that works from a dynamo, attached to the front wheel or from batteries. It is here that it is most advisable to attach cataphotes with a light-emitting diode.

Reflective fabric

An excellent alternative to standard cataphytes are fabric bases with a reflective ability. The latter adapt themselves to a bike or cyclist outfit: clothes, backpack, shoes, protective helmet. Often such fabrics are glued to the rim of a two-wheeled vehicle.

parking lights

The purpose of this lighting technology is to provide maximum visibility of the cyclist on the road in the dark. Many owners of bikes consider it necessary to install a rear size, which is capable of operating in the modes of ordinary glow, flashing and frequent pulsation. The presence of such functionality allows you to make the bike the most noticeable, depending on the conditions in which the movement occurs.

Picking up such a bicycle light, attention should be focused on the power indicator, since a weak overall is almost useless. As for the viewing angle, when illuminated, it should be about 180 °.

Finally

Cyclists who try to avoid night trips for personal safety can safely do without installing the cataphores. Ideally, the bike should be equipped with a full set of retro-reflective elements. Are not an exception светоотражатели on spokes of wheels, after all only thanks to them the bicycle becomes appreciable at crossroads and at turns.