White doors Dolce Porte

To date, one of the most popular products in the door industry are white doors. According to some estimates of people in the door business, more than a third of doors are sold white doors, or close to them shades of vanilla or ivory. Therefore, we decided to write a short release on one of the most relevant products in this segment, and above all because of the highest quality of the painting - the doors of Dolce Porte.

Let's start our story from the fact that white doors can be in different types of coverage. Let's enumerate what kinds of white doors are, by their kind of coatings.

1. White veneered doors. It uses natural veneer, which is impregnated with white enamel with patina of various colors or without patina. Here it is necessary to say that to this subsection it is necessary to include doors in color ivory and vanilla doors. Since natural veneer has properties to acquire yellowness over time. This is one of the biggest problems for these doors. You buy white doors, and in time (a year or two) you will have yellowish green canvases.
2. The doors are white with artificial, synthetic coating. As a basis, both an array and an MDF can be used in conjunction with cellular filling. As a rule, such units have the most acceptable or budgetary cost. Due to the quality of the final product, you get enough not expensive doors. From the advantages of such doors: low cost, a coating that has greater resistance to ultraviolet and does not change color over time, moisture resistance of such doors. Of the minuses: a cheaper appearance of the door unit, the film, if it is cheap, quickly slips from the base of the door leaf, and especially from the boxes and platbands.
3. Painted white doors, which are manufactured according to the Italian technology of production of such products. If there is a multi-layered coating, then such doors do not have cons. They are very resistant to mechanical damage and shocks. Do not fade with time and are not afraid of ultraviolet. Absolutely resistant to changes in temperature and humidity changes in the room.

The Dolce Porte Doors belong to the third type of door indicated in the list above, but with slight reservations. They are manufactured using high-tech Italian equipment. The main advantage of this product is that the paint and varnish products are applied to the canvas and molded into several layers. The first after fine grinding of all the parts is applied the filler in three layers, which dry up each time before applying the next one. Further in the same way a special primer is applied, which will be plastic to mechanical damage. And the last one is applied polyurethane English acrylic enamel in at least three layers. As a result of these actions, a perfectly smooth and smooth surface of the painted door is obtained. For comparison, look at the painted doors in any shopping center and compare them to the doors of Dolce Porte. For experienced buyers, we recommend that you pay attention to the end of the door and check it by touch. At the door blocks of not high-quality production, the butt will not be painted properly and have a roughness. This is due to the fact that manufacturers do not paint the door face separately because of the higher cost of the final product and as a consequence of the final price of the doors on the market.