LED tape in the interior: application features

LED ribbons are widely used today. They can be seen anywhere, even on a passing car, in the headlights of which they burn bright light. Motorists nicknamed this highlight "cilia". In the shops you are surrounded by LEDs, with which the display cases are illuminated, various cabinets are decorated with luminous stripes. Bright street advertising, too, can not do without such components.

Application of LEDs

Due to safety and lack of ability to heat, LED strip in the interior of the children's room is simply irreplaceable. You do not have to worry about the fact that the child dropped the floor lamp or table lamp. The LED strip is easily attached to a height that is safe for the child.

It should be noted that these devices are of two types: suitable for rooms with high humidity and those that can be installed only in dry rooms. This indicator is indicated on the package: it marks the degree of moisture protection. If this figure is more than 65, you can safely use the tape for the bathroom.

Let's look at specific examples and decide which room in your house is best suited for the LED ribbon.

Lighting the apartment

LED strip in the interior is easily and very harmoniously combined with other lighting devices, therefore, from point lights and ceiling chandelier should not be discarded. If even its brightness is enough to illuminate a small room, tape is used simply as an elegant touch.

Imagine this situation: you made an original groove in the ceiling, decorated it with patterned wallpaper or fresco, but with the chandelier turned it looks like a blurry spot. All because of the uneven lighting. To avoid this, glue the tape around the perimeter.

Small Living Room

LED strip in the interior of the apartment can be used in any room. In a small living room they will help create a chamber atmosphere. Buying a tape, buy immediately and a dimmer - a device that adjusts the brightness of the lamp, adjusts the mode of extinction or slow dimming, allows you to turn off the lighting automatically. This will help you bring the light management in the apartment to a new level. Your place for relaxation can be transformed into a flickering disco hall with a single click of a button.

If your room has hinged structures, you can not do without an LED tape. They are often used in non-standard layout, for example, to adjust too high ceilings. Spotlights, in contrast to the tape. Energy-intensive, in addition, they will need a lot.

Decorating furniture

LED strip differs from other lamps with low voltage (12 volts), besides, it does not emit heat. This allows it to be used to illuminate cabinets and places with poor ventilation.

The use of LED tape in the interior is very effective, if you paste it on a shelf or a book rack. You can highlight any accessory on which you want to make an accent: a statuette, a photograph, a picture. Or completely select one of the shelves.

Many of our compatriots consider it very convenient to install LED strip inside cabinets. There is no need to light the top light every time. We recommend you take advantage of this little trick.

Backlight in the kitchen

LED strip (photo in the interior you can see in our article) is indispensable for lighting the work surface in the kitchen. Every housewife knows how important it is that the lamps do not blind and do not distort the color of the products. It should be noted that even when the tape is constantly working, food will not be affected by heat. Owners of conventional lamps often complain that the heat from the powerful lighting of the working surface adversely affects sweets, which are often stored in cabinets.

If the doors of your lockers have colored glass in the finish, then you can turn them into spectacular "mosaic" inserts. Kitchen (especially in the evening) will become smart and cozy.

Today, LED tape is very widely used in the interior. Ideas for its use are sometimes amazing. For example, fashion games with reality - attempts to make their furniture seem to be hovering in the air. To achieve this it is quite simple: it is enough to highlight its lower part. Looks like this design is simply amazing.

Fresh solutions

The LED ribbon in the interior of the museum or exhibition hall will not surprise anyone. Its application is explained by the ability to clearly radiate directional light, without changing the microclimate in the room. Therefore, you should not be afraid for the safety of expensive paintings and other works of art that are dear to your heart, you can easily illuminate them with LEDs.

To LED strip in the interior of the apartment looked harmonious, rather than resembling a Christmas tree decoration, you need to connect the fantasy. Do not forget that it is attached to almost any horizontal surface. Suppose you are very pleased with your new curtains, but in the evening they are "lost". Organize them a worthy edging by gluing the tape along the length of the ledge.

Making the stairs

This is also a very interesting idea and, moreover, quite practical. The use of LED strip in the interior of a country house or a two-level apartment assumes its installation as a backlight for steps of the staircase. The tape is not only one-color. The newest technology RGB allowed to create many shades that will decorate your interior.

Advantages of LEDs

According to many users, the most important thing is that the LED ribbon in the interior does not require special professional skills for installation. With this work you can manage on your own. In addition, it can be installed and dismounted many times, which allows you to change the interior of a room at any time.