Wall panel in the kitchen. Installation of the wall panel in the kitchen with your own hands

Making repairs in the kitchen, today many people are thinking about how to protect the wall in the work area from getting fat, moisture, splashes from food. In solving this problem, it is very important that this area of the surface is not only well protected from the effects of these factors, but also stylishly looked. The wall panel in the kitchen is a great way to finish with a combination of all requirements.

Material matters

Today the choice of panels is enormous and varied. However, the wall panel for the kitchen is a special choice, as each of them has certain qualities: excellent resistance to humidity, mechanical damage, has a long service life.

Tile

Not so long ago, this material was particularly in demand, was always among the first, was considered the most reliable. Of course, he has a lot of positive qualities. But there are plenty of minuses too. The material has a high resistance to temperature, humidity, easy to care. The wall panel on the kitchen from the tile is installed from all sizes of tiles. A variety of color solutions is also considered a very big plus.

However, tile is very expensive material, it is difficult and very long to be installed. Moreover, when installing panels from it you may need additional building materials. The seams on the kitchen apron are inevitable, they get dirty very quickly, and washing them is always a problem that many people face.

The tile was used earlier for this purpose. Now he has a little lost his popularity. And the price of the issue also matters. Not many mistresses are ready to pay full price for it. Fortunately, there is a huge amount of alternative materials at a more affordable price and better in terms of performance.

Film

The most accessible form of coverage today. Easy to install, easy to clean and wash, has many colors. But the wall panel in the kitchen from the film does not take high temperatures, it is short-lived in terms of service life. Film aprons in kitchens are rarely made. The main reason is the danger during operation - it can just catch fire. As for environmental friendliness, the film emits harmful substances when heated.

Metal

The cost of this material is very high today. Therefore, not everyone can afford to install them in the kitchen. If viewed from an aesthetic point of view, then such panels do not look very attractive. The polished surfaces of the stainless metal after the time starts to fade, it is difficult to wash them. Therefore, it is not advisable to install them at home.

Glass

The wall panel in the kitchen of glass is the ideal solution. The main advantages of this material - resistance to changes in temperature, humidity, ease of care. Now it has become fashionable to put on its surface a variety of drawings, this gives a special flavor to the kitchen apron. How to fix wall panels in the kitchen of glass? Very simple and easy!

This requires a perfectly flat surface, the usual tiles on sale are inexpensive, so buy this material can every average buyer. Glass at installation allows to make illumination in a working zone is conveniently, and still visually, thanks to fixtures, space increases.

MDF panels

Plates of this material are also well suited for a kitchen apron. MDF has a lot of advantages and almost no minus. But the most important advantage of them is density and strength. Does not require special care, environmentally friendly material, does not emit harmful substances, is resistant to humidity. The panel made of MDF can be laminated, applied different patterns, its surface does not form fungal deposits or mold. The cost of the material is quite affordable.

How to fix the wall panel in the kitchen from MDF? For installation, a perfectly flat surface is not required, but before installation it is still advisable to further process it, for example, to laminate, to apply patterns, since the plate itself is not very attractive in appearance.

PVC panels

Particleboard, fiberboard and the above material are very often used in kitchens to install an apron. These materials are characterized by special properties, and therefore are widely used for this purpose. Environmentally friendly, practical, hardy to operate - all these qualities are considered to be undeniable advantages of these panels in comparison with all the above.

Dimensions

Installation of a wall panel in the kitchen with your own hands can be both budgetary and expensive. Produced in two forms:

1. Tiled.
2. Rack.

The material is characterized by high quality and technical properties perfectly combined with any interior.

• Tiled panels are squares of 98 ÷ 98 cm. They can be stacked at will: in checkerboard pattern or create mosaics, combining colors.
• Sheet panel tiles resemble plywood with patterns. The size of this material is about 3 square meters with a thickness of 3 ÷ 6 mm. In addition to textured surfaces, very popular are smooth. Large dimensions make it possible to install them extremely quickly, while the number of joints will be minimal.
• Rack panels are slats up to 3 meters long with a thickness of about 1.2 cm and a width of 30 cm.

Wall panels and design

The range of materials for today is very diverse:

1. Neutral panels are minimalistic, length from floor covering to the ceiling.
2. In the form of a mosaic, are located in the working area above the surface of the plate and countertop.
3. A natural plate on the wall with the application of nature elements on its surface.

All these materials will please the hostess or guests not only with the attractive appearance, but also with their ecological compatibility.

• If the kitchen space does not stand out with special whiteness, then wavy panels of graphite will look very harmonious in it.
• Modernity and comfort in this room will make a bamboo finish or an artificial tree array.
• Very stylish and attractive looks material, imitating marble.

With the help of such panels you can not only create a unique stylish interior, but also constructively implement almost any solution of design projects.

Material Handling

Do not forget that before you install the wall panels in the kitchen, you need to think about how they will later look. In order to really amaze their species with their beauty, it is necessary to use some processing methods before installation.

• Offset printing. Unfortunately, all video instructions teach how to properly install the wall panel in the kitchen already with drawings. They are applied using offset printing, and almost any image you choose is easily and simply applied by this method. Quality at the same time remains very high, stability as well.
• Lamination. This is an excellent protection of the panel surface from the external environment. How does this happen? On the surface of the material, a thin layer of film is applied, glued by heating. In case of self-lamination it is necessary to first apply the image, then cover it with this cover. This, first, protect the image, and secondly, will give the panel durability and attractiveness.

Installation

Installing a wall panel in the kitchen with your own hand is easy and not difficult. A step-by-step installation instruction looks like this:

• You will need an adhesive for work. You can use both silicone mixture and acrylic. Before use, read the summary carefully.
• Glue should be applied evenly at a distance of 20 cm from each other. The margins on the edges should be of the order of 3 cm.
• Mounting is best from one of the inner corners.
• Laminated panel densely, but not too much (not to damage) to press against the wall, it is easy to knock with a hammer or kyanik on the surface so that the glue can adhere well to it.
• Between the tiles you need to leave a gap of a few millimeters, after the end of work they must be puttied.

Attention! Installation of wall panels in the kitchen is done in two stages: layout with the preparation of the material and the process of installation.

Conclusion

Installation of a wall panel in the kitchen will create for you not only a pleasant appearance of the surface, but also a feeling of comfort and warmth. It will be pleasant to be in it, and the pleasure of cooking will become more vivid.