Uvex helmets: quality protective equipment

Uvex Sports is a German brand that develops and sells protective sports equipment. The company's products are ski and bicycle helmets and goggles. More than 1000 professional athletes around the world are partnering with the German company.

Uvex helmets - quality assurance

The use of protective equipment ensures your safety. Each helmet of the German brand is thoroughly tested in a special testing center. The manufacturer guarantees the quality and functionality of the products. It meets strict international safety standards for personal protective equipment. Conducting tests helps to develop advanced models of Uvex helmets.

The manufacturer provides a guarantee for all products. Her term is 2 years. If any defects are found, you should contact the supplier with the purchase receipt and the goods themselves.

Mandatory maintenance rule: the Uvex bicycle helmet should always be changed after a fall or collision! The impact force during the fall is absorbed by the helmet. At the next impact in the same place, the bicycle helmet can no longer perform its protective function 100%. Note that depending on the strength and angle of impact, the helmet may even break. This will help to avoid head injury.

Rules of operation

Use several helmets if possible. It is important that their parameters match the size of your head. Protective equipment should visibly cover it. Fine adjustment is possible with a strap and an IAS system.

Make sure that the bicycle helmet sits on the head evenly. It should not fit snugly against the back of the head, this will make the forehead unprotected. Do not pull it on the forehead, it can affect your range of review.

You can check if the Uvex helmet is right for you, slightly shaking your head with a slightly slightly opened chin. The position of the equipment should not be changed. The optimum fit is required for the helmet to fulfill its safety function by 100%.

How to adjust the size?

Place the locks so that the strap does not touch the ears. When adjusting the straps, pull them out from the left and right sides separately to get the correct length. The length of the belts in the closing system must be adjusted so that they both lie under the chin and fit snugly to the head. If the belts are too long, cut off the extra centimeters. Carefully heat the ends of the strap with a match to prevent wear. Note that the belts can have different lengths due to individual adjustments. All helmets are manufactured in accordance with the IAS system. It is a size adjustment scheme that can be used to individually adapt a bicycle helmet to any shape of the head.

The freely floating design of the ring system ensures optimal adjustment, ease of use and maximum ventilation. Adjustment is made using the wheel located on the back of the bicycle helmet: clockwise - to make the helmet more dense, counter-clockwise - to make it more free.

Terms and conditions of storage

All elements of the helmet are subject to aging, depending on handling, maintenance and wear, intensity of use and specific operating conditions.

Under optimal storage conditions (low temperature, dry, protected from daylight, no contact with chemicals and mechanical impact), the maximum service life is 8 years after the specified production date. It should not be exceeded even if the product is in good condition.

For safety reasons, the manufacturer recommends that Uvex helmets be replaced 3-5 years after initial use. The period depends on the intensity of operation.

Children's helmets Uvex

The design of protective equipment is specially designed to provide wide coverage of the back of the head, which makes it safer for the smallest customers of the company. Ventilation holes provide comfort to the head and protect against harmful ultraviolet rays. This is all combined with high-quality and bright design.

Features:

• A small weight of the Uvex helmet and high impact resistance.

• IAS system for precise size adjustment.

• FAS belts can be easily and easily adapted to the shape of the head.

• The monomatic lock of the lung opens and closes with one hand.

• 8 ventilation ducts for maximum air flow.

• The mosquito net prevents insects from getting into the helmet through the front air intakes.

• Safety standards: EN 1078, TÜV GS, CE.

• Outer material: PC (polycarbonate).

• Internal material: EPS (expanded polystyrene).

• Size: universal (46-52 cm).

Properly selected helmet - the safety of lovers of skiing

Descent on the snow slope of the mountain is not only adrenaline, but also a great risk. Protect the body from possible injuries will help special protective equipment.

The Uvex ski helmet combines flawless style and function. Its shield can be moved up and down, without any problems. In addition, mirror lenses provide protection against bright sunlight and harmful infrared rays. The Uvex helmet improves the contrast under various lighting conditions. In combination with a lens holder, the equipment corresponds to the safety classification S3.

The helmet consists of an outer shell with injection molding and an inner shell of EPS. Highly effective combination of safety: shockproof outside, cushioning and insulating inside.