Currently, the plaster facade can be attributed to the average price category among the ways of external cladding. This decoration is much more often chosen by the owners of panel-frame houses. The structure after the works looks solid and very aesthetic, and there are no limitations in terms of color solutions. In addition, the use of such a system allows additional insulation to be made. However, first you will have to buy materials for plaster facades, which are fixed not on rigid structures, but on a heater. Thus, it is necessary that the product for thermal insulation is not deformed and does not slip down.
Performing the plaster facade with additional heat insulation, you will have to use a special insulation, the strength of which on the separation of layers exceeds 15 kPa. Most often, polystyrene or stone wool is used. This product also has a low coefficient of thermal conductivity, acting as an effective material. The application of adhesive to heat insulating boards can be done in two ways. In the first case, the solution is evenly distributed throughout the area of the insulation. This is true for perfectly flat walls. Well, with another option, glue is applied at the edges of the plate and points - in the center.
When such facades are made, the photos of which are pleasing with their beauty, the decorative coating also acts as a reinforcing layer. Its task is to form a hard surface and close the thermal insulation material. It includes a special glass net and directly the plaster itself. As for the first component, it has a high resistance to alkali. Due to this, it does not dissolve when it comes into contact with the finishing material itself.
The advantages that the plaster facade possesses are quite obvious. The walls are insulated with minimal money and labor costs. Lightweight and effective insulation makes it possible to abandon the construction of bulky brick structures. Therefore, the load on the base is greatly reduced, and the interior space is increased. Inside the dwelling, due to the constant temperature, a comfortable microclimate remains, despite the weather conditions outside. When combining vapor-permeable finishes with rock wool, excess moisture is eliminated naturally without additional ventilation.
Any plaster facade is performed using products modified with polymer additives. It is from them will depend on the basic characteristics of the cladding. All materials for the construction of a similar facade are recommended to be bought from one supplier, since the components should be similar in physical and chemical properties. The vapor permeability can only decrease with advancement to the interior. The finish coat has a large number of color options. In the main palette there are almost two hundred tones.