Simple pattern of a skirt half-sun with one suture

Favorite by all female representatives flared skirts "half-sun" are fashionable elements of clothing for several seasons in a row. Depending on the material, such beautiful skirts can be worn as an everyday option or festive. Designers offer many varieties of this model. Little girls will have a pleated skirt , young girls have a short skirt, slender women have a knee-length skirt made of flowing fabrics, and women of more mature age have a length on the floor.

This thing is sewn very simply. The simplest pattern of the skirt "half-sun" is cut directly on the prepared fabric. In order to find out how much tissue is necessary for sewing, you need to know two measures - the length of the product and the waist circumference. Then the necessary footage is calculated by the formula:

A = 2 x CI + (4/3) x POT + allowances for seams (5-10 cm),

Where DI is the length of the product, POT is the semicircle of the waist.

Matter of necessary length should be folded in half with the front side inward. Horizontally the edge should turn out, and on the vertical - the fold. For fastening zippers and seam lines, it is necessary to provide 2 cm on a horizontal line, which are deposited along the edge. At this distance a line is drawn. From the fold along the marked line on the wrong side, a length equal to two thirds of the waist semicircle plus one centimeter to fit freely is placed, a chalk or pencil mark is placed. Further, the length of the product is postponed and a label is also placed. The same actions are performed along the bend, starting from the marked line. The obtained labels are connected by a smooth arc line, with the length of the skirt observing the entire length of the skirt by the measure. When cutting, add 2.5 - 3 cm to the allowances on the top and bottom of the product.

To pattern the skirt "half-sun" more accurately displayed the bottom of the product and the waist line, you can use a paper pattern - the base. A rectangle is cut from a sheet of paper, the length of which is equal to the length of the skirt, and the width to the half of the circle. Then it is cut into equal strips, which are applied to the prepared fabric, beginning from the edge and ending with the fold. The superimposed stripes at the bottom of the product move apart, and the top line, which designates the waist, remains inseparable. From the arrangement of the strips, the size of the flare will depend. In places where the strips will be spread more widely, the flares will be larger, where already - less.

When making a skirt pattern "half-sunny" from the fabric, you should pay attention to the fact that the thread interlacing is located on the sides, and the middle line of the back and front panels coincide with the diagonal of the fabric. It is important. The oblique pattern of the skirt "half-sun" is a simple solution for many fashionistas, because the cut along the oblique lines forms beautiful folds and visually slits the figure, making it attractive. The skirt is cut at an angle of forty-five degrees to the lobe of the fabric. To avoid stretching the central part of the front half, the hem should be aligned in a finished form. Sometimes the stitches are laid along the two sides of the skirt, regardless of the fact that the fabric is bent on one side. This protects the product from stretching and strengthens the side seams.

The skirt "half-sun", whose pattern is described above, is executed with one side or back seam. In addition, a belt is cut out, which is pruned to the top of the skirt. Instead of a belt, you can embed a wide decorative band.