Shower tray with own hands: installation, installation, repair

In the modern interior of the bathroom every year more and more often use shower cabins. This is due not only to their low cost and practicality, but also to convenience.

Today you can purchase both complete sets of shower equipment, and each of its component parts separately. In the latter case, you can save a lot, especially if you try to make a shower tray with your own hands.

Types of shower trays

The shower tray can be made of almost any material. It all depends on your preferences and means. All of them differ not only in design, color, but also in practicality. Let's look at each one separately before making a shower tray with our own hands.

The acrylic pallets are durable, do not absorb dirt, do not change color over time. The only drawback is the possibility of their deformation. To avoid this, the acrylic pallet either needs to be installed on a strong frame, which, as a rule, comes with it, or use a support system.

A pallet made of artificial marble is an ideal solution for practical people. Such products are strong, keep the heat well and do not clatter under the stream of water. But not everyone can make such a shower tray by their own hands. This requires special material and skills to work with it.

Steel and cast-iron pallets are remnants of the past. They heat up for a long time, very "noisy", but strong. It is for the first two reasons that they are not in great demand today.

A ceramic tile tray is one of the most common types. It is durable, easily washed and simply mounted.

Buy ready or make a pallet yourself?

Very often during the repair of the bathroom in a particular situation, certain parameters of the shower tray are needed. In order to find one that suits you, it will take a lot of effort and, perhaps, more than one month. Therefore, if you have at least a minimum experience in the field of repair, then you can easily make a shower tray with your own hands.

In this situation, you not only make the shower the right size and shape, but also significantly save. The latter is explained by the fact that the manufacture and installation of the shower tray by one's own hands are one and the same. In addition, the material will cost you much cheaper than the finished product.

What you need to know before building a shower tray in the bathroom?

Usually during construction or masonry tiles in the bathroom floors are poured with concrete. Proceeding from this, it can be concluded that the best material for the pallet that you want to make yourself is tile.

The modern choice of this material is so great that you can easily choose the one that fits perfectly to your interior in color, size and texture. In addition, this tile is also used for wall finishing in the shower room. And if you make the walls of the pallet higher, then it can serve you as a full bathroom.

A great opportunity to realize your ideas and wishes into reality is to create shower pans with your own hands. Photos of some options you see in the article. It is worth noting that not every manufacturer can please you with the right size, shape and configuration of the product.

Shower tray in a wooden bath

If you want to make a shower tray in a Russian bath, then it is done on the same principle as in the bathroom. The only thing you need to know is that the walls from the concrete screed are separated by ruberoid and polyethylene film.

In general, the shower tray is a concrete floor, tiled, along the perimeter of which the wall of the desired height is laid. The drain hole is usually made in one of the corners of the pallet, and below it there is a drain pipe. It should be noted that in the direction of the drain hole is a slight slope of the surface.

Instead of tiling some lay a smooth decorative stone on the walls and bottom of the shower tray. But many consider this impractical, since dirt is not easily absorbed in an insufficiently smooth surface, and it is very difficult to wash it out.

Water draining system

Have you decided to install the shower tray yourself? The water draining system is the first thing you need to start with. If your floor is already tiled, then this cover must be removed.

Before planning the location of the drainage hole, one must take into account the fact that the drainage pipe of the sewage system must be laid at an angle so that the water is drained by gravity. Otherwise, she will not leave.

As a rule, the installation of the shower tray with its own hands should be carried out on a hill. It may be necessary to raise the structure a little. As a result, the pallet will be slightly similar to the pedestal.

Arrangement of the pallet

During installation of a shower ladder and a discharge pipe, it is advisable to use wooden stands of different heights. They will provide the right slope for draining. Plastic pipes replaced plastic pipes. This should not be neglected when you make a shower tray with your own hands. They are easy to attach to a plastic ladder, except this, they will last you long enough.

After you fasten everything you need to drain, make a floor screed. You can pour concrete or the entire bathroom, or just part of it, a place under a future shower.

Walls around the perimeter of the pallet

The enclosing walls are expelled immediately after the screed has dried. This can be done with the help of formwork or brick. The first option consists in the fact that of equal boards or special boards two parallel vertical partitions are made each other, and a solution is poured between them. In the second case, the enclosing walls are laid out of a brick, which then plastered. It is worth noting that the wall, made with the help of formwork, does not need to be additionally plastered to lay tiles on it. Therefore, here you will save not only time, but also efforts. But everyone does as he likes.

After the walls along the perimeter of the pallet are ready, it is mandatory to make an additional screed bottom with a slope on the drain. After a few hours, when the concrete dries, primetuyte and treat it with a waterproofing compound.

Tiling of the shower tray

Completely installation of a shower pallet by one's own hands will be performed only after facing it with ceramic tiles. It should be noted that the material must be laid exclusively on a special moisture-resistant adhesive. Otherwise, the tile will not last long.

So, when buying a glutinous mixture, consult the seller. He will recommend the manufacturer to you. In addition, do not forget to specify for which specific purposes you need glue.

Information on how to prepare this solution, you will find on its packaging. Be sure to adhere to all proportions. Mix the adhesive mixture thoroughly with water with a mixer.

Begin to lay the tile from the corner. Only in this way you can correct all irregularities and errors. The solution is applied by means of a special notched trowel directly to the tile, which is put on the screed and pressed down a little.

In order for the seams to be even, in the process of laying between the joints of the tiles, insert special crosses. After the glue dries, you need to remove the crosses, and on the seams put a special water-repellent mixture.

At the end, wipe the tile with a damp cloth, then dry it.

General recommendations

As you can see, making a shower tray with your own hands is not so difficult. But all the same in this case it is necessary to adhere to the sequence of work and take into account some of the nuances.

Experts advise not to install a massive pallet, since it will heavily load the slabs. In case of doubt about your calculations it is better to consult a professional of this case.

If you want to install or repair a shower tray with your own hands in an apartment on the ground floor or a country house, in this case it is better to insulate both the floor and its part under the pallet. To do this, use modern high-quality materials. It can be either mineral wool or foam glass. Electric floor under the shower tray is not recommended.

Only that pallet, which was designed according to all rules and from high-quality materials, will serve you long and will bring pleasure during its use. Besides this, you will undoubtedly be proud to have made it yourself.