Screen on the battery heating yourself. Decorative curtain screens

Many modern owners of apartments and houses dream of making their homes more cozy, hiding the engineering communications that literally entangle all rooms. This problem is especially important for heating systems, whose heaters are located in all rooms.

If the heaters in your home are new equipment, they can have an attractive appearance, but if a harmonica or a steel plate aggregate is used in the house, then there can be no question of aesthetics. That's why more and more home-based masters install the screen on a heating battery with their own hands. In this case, you not only can decorate the interior, but also to peel the heating device.

Material selection

If you decide to make a screen for the radiator yourself, then the choice of material should be decided. Among others it should be noted:

• metal;
• MDF panels;
• plastic;
• Wood;
• Drywall.

To solve the problem described, the plastic is not suitable, because it does not conduct heat very well, and during operation it can begin to warp under the influence of high temperatures. Among other things, the price for such panels is quite high. As the main advantage of such products is the ease in processing, but this plus is crossed out by significant drawbacks.

Should I choose metal

If you decide to make a screen for a heating battery with your own hands, then you can prefer metal, which, from the point of view of heat transfer, is the most successful option. If you install a similar design, it will be possible to meet the generally accepted 3% heat loss, which the tenants will hardly notice.

Screens for metal batteries are made of sheet metal, which has a polymer coating. It should be fixed with one of the existing methods, among which one can distinguish profiles for gypsum board. But it should be borne in mind that metal working at home is a rather difficult task, and if the master does not have certain skills, it is unlikely to make an attractive product in appearance.

Wood for screen

When home masters think about how to make a screen for a heating battery with their own hands, they are considering all possible solutions, among which should be allocated wood. But the tree quite poorly copes with the task of carrying out heat and presupposes proper care. However, with the help of this material, you can make a successful and simple design that will last a long time.

Almost the same recommendations are given with respect to laminated panels that are easy to handle, characterized by durability and strength. Their outer pattern can easily be entered into any interior. In the role of an additional advantage of such screens is the absence of the need for maintenance. The material will be cheap, therefore such products are the most common for upgrading heating appliances.

The most practical solution is GKL

When deciding to make a screen for a heating battery with your own hands, you should pay attention to the drywall, which acts today as one of the most common finishing materials. It is suitable for solving the described problem, but it will be much more difficult to perform the product than using other materials. After all, for this, the master will need to have special skills, and at a cost the design will be more expensive.

Preparation of tools and materials

In order to perform a decorative screen on the battery, it is best to use a fiberboard. In addition to the main material, you will need:

• Construction clamps;
• Screws;
• Nails;
• Joiner glue;
• Metal sheet as a reflecting element;
• Sheet mesh.

Sheets of fiberboard must be selected according to the color, which will suit the shade of most interior items in the room. Grid in sheet design will be used in the role of front faceplate and side parts.

Technology of work

If you decide to perform a protective screen for the battery, then on the inside surface of the wall behind the radiator you need to glue a reflective foil shield, which can be found in any construction store. This will increase the radiant component, which goes to the heating of the outer wall.

At the next stage, you can start making a box of MDF on a wooden frame. At the first stage, the area and depth of the battery protrusion are measured. According to the dimensions, a wooden frame is made. At the next stage it will be necessary to produce a front grille for a radiator made of MDF with air holes. The more they are, the higher the heat transfer.

Cut the pattern can be electric jigsaw or any other similar tool. The upper part of the front panel should not be deaf, only then heated streams of air masses will not remain under the lid. Side panels are cut out in the next stage, they can be made deaf, you just need to create openings for the exit of pipes. Then the box is assembled and installed into place.

Recommendations for the preparation of drywall before the manufacture of the screen

The protective screen can be made of plasterboard. In this case, the material is prepared in a special way, for which its surface is pierced by a construction needle roller. Quite often in the departments of building materials such a tool can be rented.

At the next stage, the surface of the drywall is impregnated with a water-emulsion solution with the addition of PVA glue. Apply this composition is necessary on two sides, the consumption of the mixture does not exceed 3 liters. Before closing the battery with a drywall screen, it is necessary to prepare the material, as the advantages of the described procedure are the following factors:

• Creation of channels providing heat transfer;
• Ability to retain the paint layer by applying preparation using PVA glue;
• Providing an additional level of thermal conductivity;
• Minimization of debris when sawing material due to water-based coating.

Best practices for creating a screen

Before fixing the screen to the radiator, it is necessary to create an aerodynamic visor, which will be located at the top of the structure. This requirement applies to radiators made of aluminum and cast iron, and is explained by the need to avoid accumulation of air in the upper part of the battery, which negates the convection process. Such a visor redirects the infrared rays, saving heat.

Before closing the battery, you need to think about how the screen will be held. Sometimes it is installed directly on the heater itself, in some cases special studs are used for fixing, but they are quite expensive, so they are often replaced by conventional fasteners.

It is important to consider that the size of the future design should be greater than the area of the created free space. Reiki should be smaller in size than the spaces between them, whereas when closing the cast iron radiator the slats should be placed vertically. As for standard batteries, the screens for them should be fixed at the bottom of the nozzles, which are on top.

In addition to markup

If you decide to perform a decorative screen on the battery, then it is important to properly mark up. As soon as it is possible to measure the two sides of the battery - height and width, the last parameter should be added 10 cm, while the first one - 5 cm. By these parameters, the front part of the structure is made.

Quite often for this purpose a steel mesh is used, which is decorated with a profile from MDF in the next stage. Then you can measure the depth of the battery, to which should be added 2.5 cm. This parameter will become the width of the side elements. Their height should be equal to the height of the front screen. It is necessary to measure the screen cover, but its dimensions should be more by 1.2 cm in comparison with the side elements.

Cutting parts and assembling the screen

The screen for the cast-iron battery can be made of MDF sheets. To form the front profile, it is necessary to cut out rectangular details, the width of which is 11 cm. They should be made at an angle of 45 ° using a hacksaw. This manipulation must be carried out in the place where the elements will come into contact with each other. It is important to remember that on one of the profiles from below, you should make differently angled corners. This forms the inner lattice.

Fix the elements can be with the help of carpentry glue, which is complemented by finishing nails. If you decide to perform a hinged screen on the battery, then after all the previous stages can be overpowered, you can proceed to assembly. For the front part, a grid is used, which should be cut to size, and a hacksaw can be used for this. The edges are finished with a profile made of fiberboard, which is located along the perimeter. The same principle should be used for side details. From the decorative beam should be created skeleton, which must be fixed as firmly as possible, otherwise the structure will be mobile and unstable.

In the lateral faces are cut openings for pipes. It is important to ensure that the center of the radius of the width and height of the side bar is remote by 7.5 cm. The screen device on the battery assumes the location of the metal sheet at the rear wall of the heating equipment. The dimensions of the fabric should be equal to the dimensions of the decorative grid. This will eliminate thermal losses and redirect the heat flow inside.

To the wall, the decorative screen can be fixed with a stable frame or anchoring collet. However, there is another way, but it is more expensive and complicated, besides, it assumes the need for additional acquisition of expensive parts. Such screens for metal batteries are sometimes closed with racks and installed on legs made with the help of special angles. This part is usually made adjustable so that it is possible to adjust the height of the structure.