Rope ladder with your own hands: how to do it right?

Manufacture of a rope ladder with own hands is made quite often, because such a design can become a convenient adaptation in the farm. When folded, it takes up very little space and can be absolutely indispensable when march designs can not be used.

Recommendations on the choice of material for the manufacture of rope ladder

A rope ladder with its own hands can be made on the basis of rope and steps; Some craftsmen are adapted to make such cuttings from shovels, which can be purchased in the stores of construction equipment.

To make such a design, it is possible to use tubes made of plastic. Elements made of a metal alloy can be used, however in any case it is necessary to use strong preforms. Regardless of what material you intend to use, the elements should not have sharp corners that could interfere with the movement of a person.

The rope ladder with its own hands, as a rule, is made of wooden bars, which form the basis of the steps. You need to choose those bars that have a thickness of about 7 mm. The cross-section of blanks can be round or square. It is important to choose the right rope for the manufacture of stairs, which can be natural or synthetic.

Rope Selection

If you choose natural fibers like cotton, hemp or flax, the design will be strong.

Synthetic materials like nylon or kapron are considered more practical, because they are characterized by increased wear resistance. In addition, they are resistant to stretching. Among other things, such materials are resistant to the effects of various kinds of solvents, including alcohol, gasoline or turpentine. Synthetic materials will not lose their qualities, even if they get wet. When a rope ladder is made with your own hands, a parameter of 7 to 10 millimeters can be used as the optimum thickness of the rope. If you use these ropes, they will not cut your hands in use, and will also be reliable.

Staircase parameters

A suspended ladder should not have a length of more than 15 meters, while the distance between the steps should be equal to 35 cm. In view of the fact that such a ladder is considered portable, its weight should not exceed 20 kg. It is preferable to equip such a structure with stops that will prevent contact with the wall. The length of the stops can be equal to the limit of 11-22 cm.

Making a ladder by tying a rope around the steps

A rope ladder with its own hands, which will be versatile, can be made only after you can find a strong rope. It will need to be cut into two parts, each of which must be equal to 20 meters.

You will need 7 wooden racks . The length of each should be equal to 35 cm, whereas the thickness can vary from 3 to 6 centimeters. It is necessary to prepare a thick coarse thread, as well as power tools, namely a jig saw and a drill. In the course of the work, it will be necessary to use wooden elements, which can be worked with fine-grained sandpaper. And that it was convenient to work on wood, you will need a saw, as well as a construction knife.

Technology of work

Cuttings, which will perform the functions of the steps, must be connected together by means of two ropes. The surface of the prepared cuttings must be polished beforehand.

This excludes the receipt of scratches and splinters. The length of the rope should be calculated with such consideration that after tying the knots the ladder will be half as short as the original length of the rope.

Before you make a rope ladder with your own hands, you need to consider that it will be necessary to exclude the unraveling of ropes during the work. Their ends for this must necessarily first be scorched. Such manipulations can be made using the hot-knife used for cutting material. Eliminate the disbanding of the rope and another alternative method, which involves wrapping its ends with a thick thread. At the next stage, you can start work.

Before you begin to tie the crossbar, at the end of each rope you need to tie a loop, the diameter of which is six inches, this is necessary in order to be able to hang the ladder. Now you need to take the first step and tie a rope on it. Fastening of a rope needs to be carried out by a method of using the knitting technique of a self-tightening knot - it will provide a qualitative fixation of the crossbar. It should be remembered that if the stage is fixed with a knot, there is always a possibility that the steps can slip. To exclude this, you need to make grooves along the edges of each crossbar.

Handling of crossbeams

A rope ladder (pendant) with its own hands can be made in such a way that it will last long. To do this, its wooden elements must be covered with paint. You can use for this purpose a special compound that is able to protect the wood, but it is worth remembering that this manipulation can make the crossbeams slippery.

Recommendations for the manufacture of stairs

If you are thinking about the correct way to make a rope ladder, then you can follow the rules of the work presented in the article.

In the next step, having retreated from the edge about two centimeters, it is necessary to make incisions with the help of a knife - their width should be equal to 1.5 cm, while the depth - is equivalent to TRKM centimeters. Of these, you will need to form grooves that have rounded edges. Having retreated from the first step about thirty centimeters, it is necessary to tie the second crossbar. Using the same technology, it is necessary to strengthen all other steps until the staircase reaches the desired length. Before you finally tie a tight knuckle around the crossbar, you need to make sure that the elements are placed strictly parallel to each other. This need is due to the fact that remaking the site after it will be very difficult. In the end, you must get a ladder, the length of which will be 11 meters.

Making a ladder for alternative technology

Before you make a rope ladder, you need to decide what features of the design it will possess. So the ladder can have as a part of crossbeams, which have openings of through type. If you decide to use this method of manufacturing the ladder, you will need to prepare the cross-bars for the special technology, having made holes in them. Through the holes and the ropes will be stretched - this will allow to assemble the ladder into one single structure. In this case it will be necessary to use wooden crossbeams, which have a square cross-section. The length of each element will be 40 cm, and for the bundle it will be necessary to use a nylon synthetic rope. In each workpiece with a deviation of 3 centimeters from the edges, it is necessary to make holes, the diameter of each of which should be equal to 1.5 cm, while using a drill.

After you have made holes on one workpiece, you need to make sure that they match the parameters of the rope.

In the process, when you create a rope ladder with your own hands for the well, you need to perform the above manipulations and carefully work the crossbars using an antiseptic compound. Prepared in advance nylon rope, the length of which should be equal to 10 cm, you need to cut into two parts. The edges in this case, too, must be treated with a stiff string, but you can also apply hot steel.

Assembly of the structure

When the children's rope ladder is being used by the hands of the above-described technology, the next step on both ends of the rope is to make loops and tighten the knots well. Free ends of the rope need to be pulled through the holes of the first crossbar. When assembling, it is necessary to fix the crossbeams between the bars, which are nailed to the board. The long remainder should be folded into a loop and raised above the crossbar, and after wrapping around the rope assembly. In the end, you should get a step that is fixed between the two nodes. For the same technology, you need to assemble the remaining stages.

Making stairs without crossbar

Before you make a rope ladder with your own hands, you should consider that if there is no time to perform a construction that has cross bars, you can make it in another way. As the steps will be used rope. In this case, it is tied in a loop. This technique of weaving differs in that the result is a knot. In them, you can put your feet, which will allow you to transfer weight to the hinges and rest a little. If you are thinking about how to tie a rope ladder, then you have to use the so-called burlatsky loop, which you can do quite simply. To do this, you need to twist the rope so that it looks like something like a figure-eight. The lower tails of this element can be stretched, and stretch the upper part of the loop into the formed circle. Then the loop can be untied to use it for other purposes.

Making a rope ladder is much cheaper to produce by yourself, and not purchased in a store. In addition, you can make the design of the right size. Good luck!