Reinforced film for greenhouses: reviews. Greenhouses and greenhouses under the film

Reinforced film for greenhouses, the review of which can be read below, is a material that has three layers. The reinforcing mesh acts as the middle one, while the remaining layers are represented by a fairly dense polyethylene.

Reviews about reinforced film

Due to the fact that the reinforced film has a mesh, the material is strong enough. The film's resistance to external influences is determined by several factors, among them the dimensions of the cells, the thickness of the steel thread and polyethylene itself.
A material is widely available, based on polypropylene fibers, fiberglass or lavsan threads, as well as twisted polyethylene.

Consumers prefer to buy reinforced film, and not ordinary because the life of the first is much higher in this indicator than in the second. Traditional polyethylene for greenhouses serves no more than one season, whereas its more durable multilayered analogue is several years old. And if you use it carefully, it does for decades.

Reinforced film for greenhouses, reviews of which are only positive, can be used without dismantling for the winter period, which reduces labor costs and ensures the safety of the material.

Features of reinforced film

The described covering material for greenhouses can have different characteristics, which are influenced by additives used in production. For example, if there are light-converting additives in the composition of polyethylene, the material will penetrate the sun's rays through the layers and will interfere with the output of infrared radiation, which allows to keep the heat from the heated soil. Additives can also be light stabilizing. Then plants that are afraid of ultraviolet exposure will be partially protected from it. These substances prevent still destructive effects on the ultraviolet film itself. Reinforced film for greenhouses, whose reviews mark its high quality, can have anti-static additives in the composition, which prevent the deposition of dust on the surface of the film, which can reduce the transparency of the material and the passage of rays. Many consumers also respond positively to films that contain hydrophilic or antifog substances as they prevent condensation on the roof of the greenhouse. To be more precise, the condensate, one way or another, will form, but will not accumulate, dropping cold drops on the plants. Instead, water will flow down the walls of the hotbed.

Pros of reinforced film

What else is good for the reinforced film for greenhouses? The testimonials of grateful consumers mark a lot of advantages. One of them is expressed in the ability to operate this material at a considerable temperature range. The film can undergo changes from +70 to -40 ⁰ C. If an opening appears on its surface, it is possible to make repairs, which eliminates the need for replacement. Moreover, if the repair is not done, then the hole will not increase in size, as it will be held by the grid. And you can get rid of it with scotch tape.

Another positive feature of the reinforced film is its high tensile and tensile strength. The material does not deform in any way, even if it is well stretched on a steel or wooden frame of a greenhouse. External influences like strong wind, hail, snow and rain are not terrible for the film described.
Reinforced hothouse film now has the property of "breathing" - this is due to the very small holes in its base. Of course, the cost of such material is higher in comparison with the traditional analogue, but it is kept for several years, which means it will pay back.

The greenhouse under the film

Although reinforced film is more durable than conventional film, it does not cease to be a film. This indicates that it is necessary to strengthen it with caution. Greenhouses and hothouses under the film themselves should not constitute a danger to the integrity of the covering material, so before the installation it is necessary to analyze the frame for the absence of sharp edges. In addition, the frame must have a light shade, but not black, since in the latter case the film will heat up from elements attracting sunlight and fail due to thermal damage.

Greenhouses and hothouses under the film after the installation of the frame must be sheltered, for this, it is first necessary to prepare wooden slats, through which the film will be retained. The latter should be wrapped around the slats and strengthened with each other by means of a stapler. Only after you can start fixing the film on the frame, you need to use self-tapping screws for this.

Parameters of the reinforced film

Depending on the size of the greenhouse, you can select a film with certain parameters. As a rule, the width of the reinforced film is 2 m, whereas the length can be equivalent to 25 or 50 m. The cell size is 15x15 cm. The cost can be different, which is affected by additives and some other parameters, but the average price per running meter is equal to 55 rubles . Reinforced film, the size of which allows you to cover greenhouses of quite impressive dimensions, can have different density: 100, 120, 140, 200 g / m ² . The width can be more impressive - up to 6 m.

Characteristics

The material described has outstanding characteristics, among them we can distinguish:

• Impressive strength;
• Increased density;
• Resistance to external influences.

A steam-insulated reinforced film can be used in other areas, for example, in private construction as a waterproofing material. It is often concealed and scaffolding, in order to protect them from the impact of rain, because they have to leave for the time of work in the open air. Such a wide field of application makes the reinforced film even more common.