HomelinessBuilding

Water heating floor under the tile: a description of the properties and installation

In the present modern times, warm floors have been widely used. Indeed, such heating is very convenient, it is installed in private houses, various office premises and residential apartments. There are several types of such systems today: electric, infrared and water. Use of one of these methods positively affects the existing atmosphere in the room. The floor warms evenly throughout the site. As a consequence, the temperature is 3-4 degrees higher than the ceiling, and this has a good effect on people's health.

The ability to make a water-heated floor under the tile people often perceive with surprise, because everyone is used to cold tiles. But in reality tiles are an excellent conductor of heat, so this application fully justifies itself.

Among all the variety of heating systems, the choice is made in accordance with the needs of residents, technical characteristics, cost and convenience in operation. For urban apartments, electric or infrared systems are an excellent solution. But for a private house with a lot of rooms it is recommended to use warm water floors under the tile.

This water-based design is a set of devices that use the heat of hot water. It passes through pipes coming from a common boiler, and heats the floor covering. Since tiles are an excellent conductor of heat, less energy is required to provide the desired temperature than with conventional wall radiators.

Use a warm floor under a water tile In a typical city apartment is almost impossible, because there is a problem of connection to the central heating system. Proceeding from similar reasons, such systems are recommended to be used in private houses, cottages, where the source of heat is the boiler. To make it cheaper, it is made gas.

To get high-quality water-heated floor under the tile, it is necessary to perform the correct installation, to act exactly according to the technology, to pre-select the required type of pipes and to calculate their number, and also to purchase the fittings. For the device of a warm floor on a water basis two types of pipes are used: made of cross-linked polyethylene or metal-plastic. They differ not only in composition but also in the methods of connection. Pipes made of polypropylene are more durable, since welding is used for their fastening; They are two times cheaper, but are able to conduct a lower temperature. Metalloplastikovye same tubes are attached to each other by special press fittings, can be bent at corners. Before installation, the future water-heated floor under the tile is pre-prepared, all cracks should be completely sealed, dirt and debris should be removed. Doors and windows before installing the floor should already be installed.

In general, the water-heated floor under the tile is the standard of comfort and coziness. It is convenient in operation and economical, so developers should look closely at this kind of insulation.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.