Pipe in a ditch: types and process of installation.

Buying a plot of land, everyone can face such difficulty, as the presence of a ditch at Entry to it. It serves for sewage, preventing swamping of the site. This trench creates an inconvenience, which is that the car will be difficult to call on private land. Solve the problem by installing the element such as a pipe in a ditch. This product will ensure a good approach to the land and help get rid of the trench on it.

Varieties of material

Now the markets and shops offer a wide variety of drainage pipes. Let's consider some types of these products.

• The pipe in the ditch is metal (steel). It can be of different diameters or of different lengths. The pipe in the ditch must be of good quality, as a result of which the price will be slightly higher than similar products from another material. The weight of this part is heavy, therefore its self-assembly will be difficult.
• Reinforced concrete pipes for ditches. Over time, they can begin to deteriorate. This pipe is made into a ditch made of concrete mixtures with the inclusion of iron rods. Under such systems, before embarking on the construction of the structure, a sand mound is carried into the trench. This is an important procedure in this case. Then, after stacking this product, you also need to sprinkle sand and rubble on top. The installation of such material requires external assistance.
• There is also a corrugated plastic pipe in the ditch. These products are lighter, cheaper and characterized by increased durability. They do not deteriorate and do not rust. Such a pipe in a ditch can be easily installed by hand. Proper placement of this material in the trench will greatly increase its service life. To do this, you need to create a special sand cushion using geo-textiles. This is an important process. Then, falling asleep with rubble and sand for subsequent concreting. On top of the system, you can lay asphalt. Drainage plastic pipe in the ditch is light and durable. In addition, it is easy to transport and fit. Such a pipe in the ditch takes up little space, which allows the unused section to be used for its own needs. You can easily cope with the installation of this material, as well as without difficulty, cut it into parts with a special tool.

Product mounting process

In order to install the pipe, you need: a shovel, rubble, sand, a material for wrapping a pipe that is sold in a building store. First you need to excavate the trench, then wipe it with sand, lay the material, and on it pour rubble along the entire length of the trench. Now you can lay the drainage pipe in a ditch. Again, the top is spilled with rubble, the material is packed with a pipe and sprinkled with sand and, if you like, with earth. There is a drainage system ready for water drainage, and there is nothing complicated in its installation.

Tip

If the installation process of these products seems complicated for you, and you are unsure of your abilities, you can contact the specialists. The call of professionals will, of course, be paid, but they will fix everything in the shortest time and with the best quality.