HomelinessBuilding

Perforated panels - a finishing material of new generation

This is a relatively "young" finishing material, which has gained popularity among buyers due to its versatility. The scope of its application is so wide that it is difficult to imagine where it can not be used.

Where are the panels used?

First of all, this is a finishing material. Therefore, it has been successfully used for finishing walls, manufacturing false ceilings, furniture facades. They are used as screens covering radiators. In addition, they are successfully used as decorative inserts in furniture production, for the manufacture of partitions and registration racks in the office, for the manufacture of commercial equipment.

Material Advantages

HDF is the material from which perforated panels are made. It is very durable, resistant to abrasion. Undoubtedly his dignity is the simplicity in the work and the opportunity with his help to change the interior, because special professional skills for working with him will not be required. Panels are shock-resistant, resistant to abrasion and scratching, they do not have stains, they are not subject to light and temperature effects. For working and sawing panels in industrial conditions, a circular saw is used, and at home a hacksaw or electric jigsaw can be used.

Installation and installation

Installing perforated panels in the frame, you should leave a tolerance of about fifteen percent in thickness and slightly more than half a percent in length and width. This is necessary in order to prevent deformation under the influence of humidity. Before starting the work, the perforated panels must be inserted into the room in which they will be installed, and leave them for 24-48 hours. During this time they will take room temperature and humidity. For the ceiling, slabs with a size of 595 x 595 mm are ideal, and sheets with a size of 1195 x 1195 mm can be used. Plates of a larger size will bend.

Coloring and priming

Before painting, the perforated panels should be primed. For this purpose, an alkyd paint, 10-15% diluted with white spirit, is suitable.

Care of the finished product

Care for such panels should be the same as for furniture. You can use a soft damp cloth and detergents (non-aggressive).

Perforated metal panels

This finishing material meets the requirements of the most demanding designer. They are made of stainless steel, aluminum, sheet steel of all types, galvanized steel. The thickness of the sheet is about three millimeters.

Application area

Perforated metal panels can be used for decoration of facades, ceilings, columns, and in addition, for the manufacture of lighting fixtures, fireplace, ventilation grilles. Successfully applied to the manufacture of metal accessories in the food industry - gratings, baking trays, sieves, etc.

Advantages of a perforated sheet

The sheet has the following qualities:

  • Lightness and transparency;
  • Durability;
  • Ease of installation and dismantling;
  • Manufacturability;
  • Ease of processing.

Perforated panel: price

The cost of such panels depends on the material used. For example, PVC panels cost from $ 1.5 to $ 3.5 per square meter. M, aluminum plates - from $ 30 to $ 90, galvanized plates - from $ 10 to $ 39.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.