Oil Change in the Car Box

Every new car has an instruction. This instruction can not be neglected. It is advisable to read it carefully. In it you can find a lot of interesting things. For example, there you can read about how the oil is changed in the automatic box. This is not so difficult as it might seem at first. However, if you have never encountered similar works, you can turn to the help of specialists in SRT.

If for any reason you did not save the instructions from the car, information on how to change the oil in the automatic box can be found in all sorts of information guides on cars. It is also useful to look at information on the Internet, to communicate with car owners of the same brand as you, on the forums.

So, what you need to know in order that the oil change in the box was easy and simple? The oil that is in the box is completely unaffected by the fuel. Also, it is not affected by soot or condensation. But at the same time the oil becomes contaminated with time. This is due to the fact that the mechanical parts inside the box rub against each other and form small particles that settle in the oil.

Every time the car is in motion, the oil in the box gets very hot. And this is also one of the reasons to think about the need to change the oil in the box. The owner of the car should remember that in the box the oil should not heat up to more than 90 degrees of heat. If the temperature of the oil is higher, it begins to "wear out". If the temperature reaches two hundred degrees, the oil becomes completely unsuitable for further use.

And here's another reason for the oil change in the gearbox to be timely. Any oil for the automatic box contains in its composition special elements that prevent the appearance of corrosion and rust on the internal mechanisms of the car. But with the passage of time these useful properties of oil are lost.

The replacement of oil in the VAZ 2109 gearbox is done in the standard way. For this:

• The car rises with a special lift.
• The pallet is removed from the car.
• Carefully merges the old oil.
• The old filter is replaced with a new filter.
• The pallet returns to its place.
• A new high-quality oil is poured through a special opening-the "neck".

The gearbox will need to be flushed if the vehicle has been operated for a long time without changing the oil. For this purpose, special additives are used. Flushing the gearbox in such cases is a necessary procedure before changing the oil.

Flushing is required for:

• Getting rid of carbon.
• Getting rid of soot.
• Getting rid of other contaminants.
• Washing of oil channels.

For washing the gearbox, you can use special cleaning fluids, which are sold at the service station or in auto parts stores.

In order to avoid problems with the car, replace the oil in the box regularly. Even in the case when the car is not used much.