"Neomid 440": reviews, instruction

"Neomid 440" is known today to consumers as a means for external use, which is intended to protect wood of different breeds from decay, damage to wood-burning mushrooms, as well as various destructive influences. If you cover the surface with this compound, it will not be attacked by woodworm insects, on the ground, there will be no mosses, algae and lichens. In this case, the composition lasts up to 20 years and more if the surface is covered with a film-forming agent. Use this mixture as a protective treatment for treatment:

• Wooden beams;
• Bearing bars;
• Walls;
• Window and door blocks;
• Overlapping;
• Lag;
• Rafter systems;
• Fences.

Positive reviews

"Neomid 440" is known to consumers in the form of a composition that can prevent damage to wood. According to the buyers, with the help of this mixture it is possible to stop the already begun processes of destruction by biological agents. The mixture reduces the degree of cracking of the ends of sawmill materials, ensuring uniform shrinkage of buildings. Also, users emphasize that this composition can be used as a priming antiseptic for the further application of paint and varnish materials. The mixture is not capable of changing the structure of the wood, among other things, it does not interfere with the processing, coloring and gluing.

Feedback on the field of application

"Neomid 440" has a fairly wide scope of use. Consumers in their reviews say that it can be used as a protective impregnation for surface treatment inside and out. According to users, the composition shows itself perfectly on the structures of wood of different purposes.

Instructions for use: Surface preparation

Before Neomid 440 is applied, it is necessary to prepare the surface, protecting it in areas where the composition should not be applied. The surface is cleaned from resin, old paint, dirt and dust before using the product. If the surface is already affected and has a bluish tint, then at the first stage you should use bleach, they can make the composition of the same manufacturer. Using it, you can disinfect the surface and give the wood a natural shade. Work should be carried out under special conditions, which are expressed in a limited ambient temperature. Do not start the work if the thermometer has dropped below +5 ° C.

Preparation of the solution

Antiseptic "Neomid 440" is on sale in the form of a concentrated solution, before use, the mixture should be shaken, and after dilution with water in a ratio of 1 to 19. During the breeding you should get an emulsion that has the color of coffee with milk. Concentration can be increased to 1:15, this is acceptable when storage of wood before or after treatment will be conducted at a relative humidity exceeding 80%.

Solution flow rate and application method

"Neomid 440", the instruction for use of which will allow you to avoid mistakes, will be used in the amount of 100 to 200 grams per square meter. Wood can be processed in one of two ways. The first involves the use of a roller or brush, as well as a sprinkler, while the second involves the immersion of the material in the emulsion.

In the first case, the application of the mixture on the surface should be carried out as evenly as possible. If a brush is used, then it must have synthetic pile. If you decide to apply the immersion technology, you can use a container of stainless steel or plastic. The time during which the material must be kept in the emulsion should not be less than 2 minutes.

"Neomid 440", reviews of which only the most positive, can be applied by immersion of elements in the emulsion. This method is most effective in industrial conditions, when there is a need to disinfect a large amount of lumber.

Work should be carried out in intensively ventilated areas or outdoors. After the treatment of wood should protect it from water and precipitation, these conditions must be observed throughout the drying phase. The first day the treated products should be stored at a temperature in the range from 16 to 20 ° C, while the relative humidity should be within 60%.

For reference

If you decide to use "Neomid 440", reviews about which you could read above, then you should know that after application, the composition can change the tone of the wood, this is due to the breed and the variety. Do not be scared, because within two weeks a natural shade will return to the material.

What else is necessary to know about the antiseptic brand "Neomid 440"

The consumption of the emulsion can vary depending on the characteristics of the wood, its maximum value is 350 grams per square meter. Judging by the feedback, it is necessary to apply the composition in greater quantities to the wood that will be stored in conditions characterized by high humidity. You can use the mixture not only from the outside, but also inside the premises.

The people using this tool write in reviews that the final shade of wood remains untouched. The term of protection can be up to 25 years. Store "Neomid 440" is necessary at a temperature ranging from +5 to +30 ° C. The mixture withstands 5 cycles of freezing and thawing. The concentrate can be stored for 12 months, but diluted ready-made solution - 14 days. Characterizing the antiseptic "Neomid 440", consumer feedback also speaks about the environmental safety of the facility. Its application is carried out in several layers, their quantity can vary from 2 to 3. The products can be purchased in plastic cans with a volume of 1 to 30 liters. As an intermediate value of the volume is offered packing of 5 liters.

Conclusion

Buyers' advice is advised to remember that when making a working solution of "Neomid 440" the master should use personal protective equipment, namely: gloves, goggles and protective clothing. If the mixture gets on the skin or in the eyes, they must be rinsed with plenty of running water. If necessary, consult a doctor. The composition contains water, technological additives and a synergistic mixture of biocides.