Hydraulic oil from well-known manufacturers Mobil and Shell

Applying hydraulic oil from well-known manufacturers Mobil and Shell, you will be assured of their high quality. Shell and Mobil oils have a number of advantages: they reduce equipment wear and can be used at extreme temperatures (both high and low), have anti-corrosion and water-separating properties, are not oxidized (compatible with many metals).

Shell manufactures various hydraulic oils, their application is diverse both in industrial equipment and in hydraulic systems in mobile equipment. Such oils are called Tellus. The presence of additional symbols S2, S3 and S4 indicates the level of performance. The higher the figure, the longer the period of use.

By letters you can understand where the oil is used and in what conditions:

A - wet conditions,

E is a highly effective and energy-saving oil,

M - industrial application,

V is a wide range,

X - high efficiency at low temperatures.
Consider some of the brands of oils. Shell Tellus S4 VX hydraulic oil is used at very low temperatures (up to -50 degrees). Can be used for mining equipment and forestry machinery. It has low toxicity (formerly Shell Tellus Arctic). Tellus S2 MA (formerly Shell Tellus DO) is an oil for industrial use, waterproof. Tellus S2 VA- for general use, moisture resistant. Tellus S3 V (formerly Shell Tellus STX) - has a longer service life, is used in industry and in mobile equipment that is used outdoors.

These letters were introduced relatively recently, before there were other names.

Mobil hydraulic oil also contains high-quality base oils and additives that provide anti-corrosion, reduce equipment wear.

Mobil DTE 11M (13M, 15M, 16M, 18M, 19M) is used at very low temperatures (up to -46 degrees Celsius), high speeds and high loads. This oil protects against corrosion. Applied in various pumps.

Mobil DTE 21 (24, 25, 26, 27) - due to the viscosity forms a film on the surface, thereby protecting against corrosion, wear, ensuring the cleanliness of the systems. Good demulsifying ability when working with water.

Mobil DTE Excel 22 (Excel 32, Excel 46, Excel 68, Excel 100) - ashless oil for heavily loaded systems, used for copper alloys. Compatible with coolant (cutting fluid).

Mobil Nuto H 32 (H 46, H68, H150), known earlier as Esso Nuto - reduces corrosion, has water-repellent ability, is designed for gear, vane, radial and axial systems in piston pumps.

Mobil SHC 524 (SHC 525, SHC 526, SHC 527) - does not contain paraffin. Specially selected synthetic oils and additives provide protection against wear at high temperatures (above 238 degrees Celsius), low temperatures (-54 degrees) and at high loads. Use this oil in piston, gear pumps. It differs in viscosity.

Selecting high-quality hydraulic oil, you reduce maintenance costs, provide protection, thereby increasing the efficiency of your production.

Before acquiring a hydraulic oil for your equipment or machinery, it is necessary to familiarize yourself with the instruction (lubrication card) in which the recommended oils (usually 4 to 5 different manufacturers) are indicated and the viscosity is indicated. For the right selection, please contact the professionals.