HomelinessDo it yourself

How to wash the hood from the fat at home?

If there is a hood in your house, then you should think about when you last looked under its dome or checked the filter for the degree of purity. If you did this a few months ago or are just going to do it, you should be prepared for the fact that the species will be awesome. The filter in the extract serves as a collection of fat, fumes and odors, therefore, properly performing its work, it will get dirty in the shortest time of intensive equipment operation.

For reference

On the surface of the filter you can see a fairly thick layer of dirt. Over time, the filter can become contaminated to such an extent that it becomes inefficient in operation. To avoid this, it must be periodically cleaned. Cope with the work can be at home. If you have wondered about how to wash the hood out of fat, you should know that such work should be done at least once a quarter. And if you often cook, then they can be repeated once a month.

Features of preparation

Cleaning the hood starts with preparatory work. For this purpose the device is disconnected and disassembled. Beforehand, read the instruction manual for the equipment. Before you start cleaning, you need to dismantle the lid, which is located above the stove. To do this, detach the latches, only after you can remove the element from the grooves.

Next, remove the filter and remove the pipe that connects the vent to the hood. It also has to be cleaned of fat. Then you can also remove the air filter. For contamination, the equipment body must also be inspected.

If you are thinking about how to wash the hood off the fat, you should know that the filters can be washed in a bath, soaking them in a dishwashing liquid solution. As for the air filter, it does not always need to be cleaned. Information on this you can always find in the instructions.

The surface of the hood must be thoroughly cleaned. Standard detergents and sponges are usually used for this. The composition must be diluted in water using a proportion of 1 to 4. The sponge in the product must be moistened and wiped with the surface of the device. After cleaning, the base is wiped dry, so that no stains remain. When it comes to the filter, you can experiment with its cleaning, because there are a lot of ways for this.

Selecting a method

Before washing the hood from the fat, it is necessary to select a technology that will provide for the use of the appropriate means. The most popular solution will be fat-dissolving agents, which are used for washing dishes. The filter is soaked in the composition, and after it can be wiped with a brush or sponge, having poured boiling water in the final stage. The effect can be achieved only if the contamination is rather fresh.

The filter can be cleaned with a soda solution. This approach is the simplest, most secure and at the same time most effective. Quite often mistresses are wondering how to wash off the hood from the fat. To do this, take a large pot, fill it with water and put it on the fire.

Once the water boils, you should fill it with soda in a volume of 1 cup. When all the soda is at the bottom, it should be well stirred and placed in a pan grate filter. The element should be boiled for half an hour, until the contaminants recede. If the capacity is large enough, the procedure can be repeated by turning the filter over. At the final stage, you will need to wash the pan.

Alternative solutions

You can clean the filter from fat with soap. For this, 72% of the composition is perfect. To carry out the work, it will take 0.5 pieces, hot water and grater. A bar of soap is rubbed so that it can be dissolved in hot water. The agent moistens the sponge. She should wipe the surface of the hood and filter. From the old dirt, you can get rid of the metal scraper.

Use at home can be a product based on vinegar. It is important to take care when doing this, because the remedy can not be called safe. For protection, use rubber gloves. For cleaning, use rags soaked in acid. All contaminated areas must be thoroughly wiped, wetting the surface.

Vinegar is left on the ground for up to 7 minutes, if the pollution is quite impressive, then you can extend this time to 12 minutes. Undiluted acetic acid can be used for long-term contamination. If spots appear recently, then a solution with water should be used, which should be prepared in the proportion of 1 to 2.

The use of citric acid and the means for cleaning pipes

If you also wondered about what to wash the hood in the kitchen from fat, then you can use lemon juice. To do this, prepare two fetuses, which are peeled and cut in half. The surface of the hood should be cleaned with pulp. The base is left for 10 minutes, then you can remove the dirt with a soft damp rag.

If the fat was formed on the hood quite an impressive layer, then the procedure can be repeated several times, until it will be possible to achieve a positive result. If you still do not know what to wash the hood in the kitchen from fat, then you can use the radical method, which involves the use of a tool for cleaning the pipeline. However, experts do not recommend using this technology too often. For the entire life of the hood, this method can be resorted to only a couple of times.

However, if the filter has not been cleaned for quite some time, and the fat has accumulated in its cells thoroughly, then this method will help you out. In addition to the means for cleaning the drainpipes, you will need a container of stainless steel. Well, if the kitchen sink stainless steel.

The remedy should be prepared according to the instructions. It is poured into a closed sink, and then put the filter in the composition, not forgetting to put on gloves. You will see the reaction, after that the grid will only need to be washed several times under running water. This method uses alkali, which is able to aggressively affect the metallic elements.

How often should I clean the hood

Some mistresses are wondering how often it is necessary to expose the hood and its elements to cleaning. It all depends on how often you cook. If the cooker works every day, the cooker hood must be cleaned once every three months. Otherwise it will be enough once in six months. However, more frequent cleaning procedures will make it easier to deal with the layers of fat, because old stains are strongly eaten, this is especially true of the metal mesh.

If you have wondered about how to wash the hood of the hood from the fat, then you can put it in the dishwasher, the temperature while this should be minimal. Use for cleaning should be sparing. If you decide to manually clean the mesh, then it will be sufficient to use traditional cleaning agents that are previously dissolved in warm water.

Additional recommendations

As an alternative solution for cleaning the elements of the hood, a solution of soap and soda in water can emerge. After boiling the grate, it will be easier to clean it of fat. This process usually takes 5 to 10 minutes. Turning the grill over to the other side, the procedure should be repeated. But this does not end there. After the boiling is completed, the grate is soaked in the solution, which remains after the procedure.

Instead of a pot, you can use a large basin. The grate is left for several hours, only this way it will be possible to remove the old dirt. A tool for this may be a brush or rag, but it is important to try not to damage the part itself. Sometimes prolonged soaking and boiling is not enough, in this case you can use ammonia, which is a reliable and proven tool.

If you are faced with the question of how to wash the extract from fat at home, then half a cup of alcohol should be diluted in 3.5 liters of water, previously wearing a mask or respirator. In the room where you plan to do these jobs, you need to open the windows. A filter is placed in the hot solution and left for several hours. As soon as the dirt begins to depart, it can be removed with a stiff brush, but the intensity of the impact should not be such that it could damage the part. The filter is wiped dry with rags at the final stage.

Use of bleach

If you also belong to the number of owners who are thinking about how to wash the hood from the fat, improvised funds will do you a good service. As another method is bleach, it helps to get rid of pollution, not only in the filter area, but also in the hull area. To begin with, dirty places should be moistened with water, and after applying whiteness, it is most convenient to use a toothbrush for this. After 10 minutes, the remnant and scale residues are removed with a sponge, and the elements can be washed under running water.

How to avoid fat deposits

Of course, it is important to know how to wash the filter of the kitchen hood from the fat. But such pollution can be avoided if you comply with the rules for the care of household appliances. Each time after cooking, the spray of grease can be removed from the surface of the device with a soft rag. To carry out such work, it is necessary to choose the right cleaning agent, with which the care of the hood will not be too difficult.

When dishes are not standing on the stove, the gas should not remain switched on, in addition, the hood must be cleaned only after it is turned off from the electrical network. The installation of the hood should be entrusted to the professional, because otherwise the device can be located too close, which will provoke the appearance of the fat layer much earlier than you would expect.

Using the Steam Cleaner

If you are faced with the task of how to wash the kitchen hood from the fat, then you can take advantage of the effect of steam. To do this, you need a steam cleaner, which is pre-filled with water. At the next stage the device is connected to the network, and then it is necessary to drive only by hand. There are such models of steam cleaners, complete with which are delivered special napkins and nozzles. They will help in cleaning the hood.

Conclusion

Among the most common questions that arise in the minds of the housewives, who follow the purity, one can single out: how to wash the extract from fat with soda. To do this, the powder can not be dissolved in water, but simply wipe the contaminated surface with it. However, it is first important to make sure that abrasive particles do not damage the substrate.

Once the surface has been rubbed with soda, you can wash it with water, using a sponge or a soft rag. Now you know how to quickly remove the hood from the fat. In order to achieve a positive result, you can use several tools in the complex or decide which technology suits you more than others.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.