How to replace the starter VAZ-2110

Probably, every driver of the domestic "tens" encountered such a problem when it is necessary to go somewhere urgently, and the machine does not want to start. Sometimes the cause is hidden in the low charge of the battery. But if you are convinced that this part is fully charged, look carefully at the VAZ-2110 starter. It is he who performs the function of starting the engine. But if the problem is hidden in it, do not despair, because you can eliminate this problem very quickly, and with your own hands. In this article we will tell you how the VAZ 2110 starter is arranged, and how it can be replaced.

Part construction

This spare part is the main part in the engine start system. Without a starter, it is impossible to build any modern car, as it untwists the crankshaft to a certain frequency, thereby facilitating the quick start of the engine. Also in some models of spare parts there is a special launch device (as a rule, they are equipped only with those starters that can not be switched on themselves).

How to choose a VAZ-2110 starter?

When choosing it is necessary to purchase only the spare part that is specifically designed for your car, otherwise such a detail will not work. And even for domestic VAZ there are different types of starters for a certain model. When choosing, always take into account the fact that the starter on the VAZ-2110 may not always fit under the "six" or "nine".


So, after the purchase, we are faced with the task of installing a new part. But before you do this, you need to remove the broken part on the VAZ-2110. Starter - its installation first begins with the disconnection of the power supply by removing the negative terminal. Next, you need to disassemble the engine protection (if it is) and find the place where the spare part is fastened. On the VAZ of the tenth family, the starter is located on the right side of the injector. To learn it is very simple - the design looks like a large hairpin with a nut.

Then you need to lift the vehicle to an elevated position. To do this, you can use a simple jack, but it's best to go to the overpass or to the inspection pit. There are many ways - the main thing is that you can climb under the car and unscrew a few bolts. Which ones, we'll tell you later.

So, let's go directly to the nuts. Starter VAZ-2110 is fixed to 3 bolts: the first performs the function of fixing the positive wire on the retractor; The second holds the main negative wire; The third is at the bottom of the starter and holds all the other negative wires. So, all 3 nuts need to be unscrewed. Then go to the hood and unscrew the upper bolt starter. Everything, at this stage, the dismantling of the part is complete. Now you can safely proceed to install a new spare part. It is done according to the same principle.

Life time

And finally - on the life of the newly installed parts. Often VAZ starters serve on 5-6 (and sometimes even for 7) years. But this does not mean that during this period you do not need to monitor its condition, otherwise your iron friend will not start.

Similar articles





Trending Now






Copyright © 2018 Theme powered by WordPress.