HobbyNeedlework

How to make a phone bag made of rubber bands?

A phone case made of rubber bands is a thing that every little fashionista dreams about. After all, you will agree, this bright, memorable, and most importantly, completely individual accessory will not go unnoticed in the crowd.

Thinness, which you need to know in order to weave a phone case made of rubber bands

The cover is a wonderful thing, of course. But how to make a phone case made of rubber bands so that it would be worthy of a little princess? In fact, there is absolutely nothing incredible and difficult in it - any girl can cope with this matter independently, if she is not very small, of course. Learn how to weave a cover on the phone of rubber bands - it's not difficult at all, here the main thing is to have a desire and skill. With desire, most likely, complete order, but with the ability to have problems. But this thing is also fixable: several useful tips - and a chic, exclusive accessory in your pocket.

Stocking equipment

Keep in mind that for such a serious matter as weaving, first of all you need to be patient with a lot of patience. After all, this will take some time - the result does not appear instantly. After all, weave a cover on a phone made of rubber bands - it's quite a laborious task. First of all, for its creation, it is necessary to determine the scheme and method of weaving. Then get those very rosy rubber bands - the backbone of our cover. There must be a lot of them - not less than a thousand pieces. In addition to the iris, you will need directly the scheme itself of the weave, drawn on a sheet of paper (it will be easier to cross out what has already been done), and, naturally, the very device for creating a masterpiece. On the fingers of such a thing can not be twisted, so you need to attend to the presence of a special machine or hook. Of course, you can try to weave a phone case with rubber bands on the slingshot, but it will be just a waste of time.

How to make a phone case made of rubber bands

There are quite a variety of ways to weave products from Rainbow Looms - it all depends on the complexity of the product and the skill (respectively, and age) of the performer. But if we talk about the case on the phone made of rubber bands, then there are only two accessible and convenient ways of weaving.

  1. On the machine . This method, of course, gives a wider range for the flight of fantasy, since it makes it much more interesting to vary both the available pattern and the shape. A lot of schemes that can be implemented, and a huge number of patterns will please you.
  2. Hook . Here, of course, the options will be a little less, but if you have enough skill, you can create an amazing beauty case for a phone made of rubber bands.

We make the product on the machine

Having a set of rubber bands, a machine tool and a little patience, you can make an exclusive thing. The phone case made of rubber bands on the machine can be made easy. On the columns of the machine (upper and lower row) is put on each under one rubber figure eight. The main task is to achieve that the output is a kind of letters X, occupying the entire perimeter of the machine. Amplitude of weaving is the first lower column and the second upper braids the first iris. The next one clings to the second lower peg and is hung on the first upper peg. Further all is simple - not twisted elastic bands are put on corresponding pairs of pegs in the bottom row.

The same is repeated for the upper row. Using the hook, the lower bands are pulled together to the middle. Then all actions are duplicated according to the required length of the cover. Do not forget about the technical holes - they are done simply with the help of passes. To complete the weaving, remove all the loops on the first row - and then on the iris, which is then tightened.

This is a completely general scheme, if you wish, you can always dilute it with some of your personal know-how - for example, use different variations of the color of rubber bands, weave patterns and ornaments, you can even weave letters - in short, use everything that your imagination will allow.

Cushion cover for phone

Of course, at first glance, it may seem that weaving a phone case with rubber bands using a hook is much harder and longer. In fact, this is completely wrong - both have their own charms and comforts. For crocheting it is necessary to acquire directly by the very instrument of labor - a hook. Further all is simple - weaving goes by way of "chain". Note that the chain link is about 1 cm, so it's easy to calculate exactly what length the product you need, and how many elastics it will take.

First, take the first elastic, turn off the figure eight and put on the hook - that's the first loop. Next, we take the next one and pass through a double loop - there are already four loops. The last two loops all the time extend through the new iris and return back to the hook. Thus, we get the whole cover - smart and beautiful.

Open case

In order to weave an interesting case on the phone from the rubber bands, you do not need to have any unusual knowledge. It is enough to have a machine at hand. Do not try to knit a phone case from rubber bands on the forks - it takes an insane amount of time and does not guarantee a good result, because after all the case for the phone is not a bracelet at all.

If you do not like that your phone is always closed, you can weave the cover with an open screen. This will not require anything new - a machine (preferably a double) and a rubber band.

The beginning is standard enough - on columns eight are thrown. Then on every second pair of pegs is put on an elastic band. Do not forget to leave the distance for the screen. After that on each column on perimeter put on irises (already other color). Erasers from the eights from the bottom go up and drop. Then again on the perimeter put on the rubber bands - and everything repeats. That, in fact, and all the wisdom.

A small bonus - accessories

The most standard case can always be distinguished among other similar products with the help of accessories. A variety of patterns - this is excellent and bright, but it will look much brighter than the product, for example, with a bright flower of rubber bands. In order to do it, you do not need much time and gum. For this product will be used somewhere around 15 gum. The weaving itself occurs with the help of a slingshot, since the flower will be small enough.

A rubber band is wound on one horn of the fork in three rows. Then on both horns two irises are put on, and the triple elastic band is removed from under the bottom in the center of the double. Then the double rubber band is removed to the opposite horn. Everything repeats five times. Thus, on one of the horns of the fork, five double rubber bands with an inner row of triple coiled ones are obtained. After that, the next iris is put on both horns, and all the bands from the horn are removed into its center. It turned out an elastic band on the horns, and in the middle of the flower. The end of the connecting band is stretched, passing through the other. All is left to spread the petals - and the flower is ready. It can be worn on the cover during the weaving - and you will get a wonderful accessory.

In the same way, you can decorate your future cover on the phone with rubber bands with various asterisks, figures - everything you want to stand out.

Conclusion

As you can see, it's quite easy to understand how to make a phone case made of rubber bands. With patience, desire and a small amount of imagination, you will definitely get something that will distinguish you in the crowd of the same gadget users. It does not matter the model of the phone or its sophistication - with such a case made with your own hands, you will always be at the peak of fashion trends and, importantly, never merge with the crowd. Such an exclusive thing will only you and no one else.

Of course, the boot is not the only thing you can create from these wonderful Rainbow Loom. Bracelets, rings, toys, charms - an excellent opportunity to express yourself in the work, and not only yourself. Children will be happy to join you in this useful entertainment, and you will have fun and productive time together. After all, beauty is a terrible power!

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.