How to make a paper bracelet: a step-by-step instruction

Many people like to create jewelry by their own hands. Motives for this are different for everyone: someone wants to become the owner of an exclusive, someone just likes to create, while others are chasing after changeable trends of fashion. At the same time, the most unusual materials are used. For example, this article will tell you how to make a bracelet from paper.

Advantage of the material used

Fashion for paper jewelry came to us from the distant 60's, along with the rest of the trends that have come back from the past. It is an ideal material for creating something, because it perfectly keeps the form and is very pliable, the main thing in working with it is patience and accuracy.

It would seem that paper is an extremely fragile basis, but with additional fixation it can withstand small mechanical stresses, it is enough to have glue or varnish on hand. Before you make a paper bracelet with your own hands, you will also need to choose from a variety of manufacturing options and, of course, the material used. After all, today there are a huge number of types of paper, different in color, density and texture.

What will it take to work

To create a paper decoration you will need:

• PVA glue;
• Ruler;
• A4 paper, preferably dense;
• Pencil for marking;
• Large beads;
• Thin transparent fishing line.

How to make a paper bracelet in stages

This method involves creating an ornament from paper beads, so it is quite painstaking and complex.

1. To begin with, you need to correctly mark the sheet in triangles. To do this, measure 2 cm to the right of the bottom edge and draw the line diagonally to the upper left corner. Then from the new mark, retreat 3 cm and connect it straight with the old one in such a way that a triangle is obtained. By the same principle it is necessary to draw the entire sheet.
2. Cut the resulting shapes.
3. Using a pencil, you need to twist the triangles into a roll, starting to wind the strips on a wooden base from a wide edge. Since it is a bit difficult for a beginner to make a paper bracelet in this way, it is better to practice in making it on an unnecessary material, for example, an old newspaper.
4. A thin tip will need to be smeared with glue before wrapping it around the pencil.
5. Moving the bead to the very edge, it should be completely dipped in PVA and allowed to dry. If the bracelet requires many elements, it is better to change the bead to a toothpick, so as not to rip the paper when trying to peel it off the pencil.
6. When all the beads are ready, the question of how to make a bracelet out of paper with your own hands? Will fall off by itself, since here you can give vent to fantasy.

Further, it all depends on how the creator wants to see the decoration. For example, paper beads can be alternated with those prepared in advance - then the bracelet will turn out to be thin, but long, or thick, if you apply a slightly different technology:

• The line should be threaded into the bead with one end, the other should be passed from the opposite side and pulled in such a way that they tightly wrap around the paper element.
• With each edge put on bead.
• With the next bead it is required to perform similar manipulations, passing through it a line from two sides. In fact, the same technology is used in beadwork, so for those who are familiar with this type of needlework, problems should arise. The ends of the line are fixed with a simple knot when the required length of the decoration is reached.

Origami technique: how to make a paper bracelet

For beginners this method fits best. It will take only paper and scissors. The sheet format is not important, the main thing is bright colors. Therefore, to create an ornament it is better to take a special paper for origami, because it can be very beautiful and pleasant to the touch. The only drawback of such a bracelet is the relative fragility.

1. Paper should be divided into strips along the width of the sheet to then cut them. It is desirable that they are not very thin, otherwise the elements will be difficult to fold later.
2. Then the cut strip should be folded along 4 times, the edges bending inside the workpiece, and after - in half 3 times: in the middle and along the edges (the ends should be folded to the central fold, so that two pockets are obtained).
3. There are several such details to be made.
4. The workpieces should be connected in a zigzag pattern, by inserting one into the other (this requires "pockets").
5. When the bracelet reaches the desired length, the ends are simply connected to each other in the same way as the other elements.

Of course, there are many ways how to make a bracelet from paper, but these are the most common ones. They are devoted to the master classes on the Web, which will help you deal with the tricks of creating jewelry.