HobbyNeedlework

How to make paper decoration? Templates, instructions

From paper decorations for the New Year are made very easily and as a result, you get a light and airy decor of the premises. We offer you several master classes on the creation of festive handicrafts.

Origami Santa Claus

We suggest starting with the production of paper Santa Claus, which can be hung on a Christmas tree, used as an ornament for a postcard and so on.

Instructions how to make Santa Claus:

  1. Take a square sheet of thin paper. It is desirable to take a leaf with one side of red, and the other - white. If there is not one, then take two sheets and glue them together.
  2. Place the paper with the red side up and bend it in half to make a triangle.
  3. Turn the sheet, flip it with the underside and place it so that you have a diamond in front of you.
  4. Fold the top down.
  5. Raise the half of the bent end up.
  6. Unscrew the triangle and bend its small tip.
  7. Fold the triangle over the folds.
  8. Wrap the bottom of the diamond.
  9. Bend the end down, as in illustration 8.
  10. Turn over the shape.
  11. Slightly wrap the sides of the part.
  12. Turn the left and right sides to the middle of the figure.
  13. Turn the ends, as in the illustration 12.
  14. Wrap the left wing, as in illustration 13.
  15. Raise the bottom of the right side.
  16. Place the raised part in the formed pocket.
  17. Do the same with the left wing.
  18. Turn over the figure (Figure 17). At you the Grandfather the Frost from a paper has turned out.
  19. Draw a little face.

The handicraft is ready!

Paper cones

Very beautiful look made from paper ornaments on a Christmas tree in the shape of cones. Doing them is fairly easy, the main thing is to have the right shape at hand. It can be a ball or an oval of foam, an egg from under the "Kider-surprise" and other similar things.

Take a big puncher and make a lot of confetti. It is desirable that the resulting circles are about two to three centimeters in diameter.

Take the form and paste a ready-made circle on it with a glue gun . Start with a narrower end. Stick it so that the half of the circle is free. Each new series starts over the previous one. When the lump is done, attach a small loop from the ribbon and glue the spruce twig.

The second version of the cone - suspension

To make a bump of a slightly different shape, you do not need a puncher, but you will also need a base in the shape of an egg.

Operating procedure:

  1. Cut a square from the paper and bend its left and right sides to make a triangle. At the same time, you need to leave a small piece from the bottom (see above for the presented diagrams).
  2. Make many more similar pieces of paper from paper.
  3. Take the shape and on the narrow end, glue the four pieces in such a way that they touch their peaks at one point.
  4. Stick the next layer of workpieces. It should start immediately above the previous one, and the vertex of the triangle should be placed between the two previous elements.
  5. In this way, glue all the rows.
  6. Attach the ribbon.

A cone for a Christmas tree is ready!

Paper Christmas Wreath

To make paper decoration on the door, you need to take sheets of cardboard or cardboard rollers, glue gun and scissors.

The procedure for making a wreath:

  1. If you have cardboard rollers, then squeeze them a little and cut the same circles around the width.
  2. If you have sheets of cardboard, cut them into the same width and length of the strip. Then glue the edges of the stripes to make the rings, and then squeeze them to make out the ovals.
  3. Glue together five ovals with sharp tops. As a result, you should get a flower.
  4. Make many similar flowers.
  5. Glue the flowers in a circle. Select its value arbitrarily. Each flower is inserted into the previous one between the petals.
  6. Make a smaller wreath.
  7. Glue a smaller wreath on wreaths a little more.
  8. Decorate in several places a ready-made wreath with beads.

The handicraft is ready!

Herringbone of colored paper

Of course, this craft does not replace the living forest beauty, but it will cope with the role of the object for the interior decor. It can be put in a room where there is no real Christmas tree, on a festive table, in the hallway.

Instructions how to make a Christmas tree from colored paper:

  1. Take a sheet of heavy paper or paperboard in green.
  2. Draw a circle with a compass, and in it, about in the middle, one more.
  3. Pass through the center several lines that will divide the circles into sectors. Remember that the more divisions, the more "sticks" your fir-tree will have.
  4. Cut the circle along the outer contour.
  5. Make some similar blanks. Each new part should be a couple of millimeters smaller than the previous one. The number of blanks depends on how high your herringbone will be.
  6. Do cuts with scissors on the divisions up to the circle inside.
  7. Wrap the cut pieces so that the cone is formed, and glue the edges.
  8. Flip the part.
  9. Do the same for all other elements.
  10. Pier the first piece of wire in the center.
  11. String all the other components on the wire like a pyramid: first, there are more details, then smaller ones.
  12. Correct the ranks so that the "twigs" are not superimposed on each other.
  13. Make a small cone and place it on the top of the Christmas tree.

The handicraft is ready!

Bulky paper monkey

With the help of thick double-sided scotch, you can make funny voluminous monkeys from paper. The cut-out templates will simplify the task, but if there are not any, then it's okay. To make the craft work, you need to choose sheets denser or take the cardboard.

Master class, how to make a monkey-3D:

  1. Take a suitable paper and draw on it the elements from which the monkey will consist. For example, you want a monkey to have a head, legs and tail. Then these elements are drawn separately from the trunk.
  2. Then cut out all the details.
  3. If you used white cardboard, color the details of the monkey.
  4. Now you need to connect all the elements. To do this, take a double-sided thick tape and cut off some small pieces from it. Glue them to the joints and glue the parts. It is worth noting that the 3D effect of the craft is achieved by superimposing one part to another.

A voluminous monkey made of paper is ready! You can hang it on the Christmas tree or decorate it with a greeting card.

How to make paper bulk snowflakes?

There are several ways to make three-dimensional snowflakes from paper. We will cite not the most famous. The craftsmanship made in this way will look very beautiful and unusual.

The master class for making a snowflake is given below.

  1. Take two sheets of square shape.
  2. Fold each sheet so that it takes the form of a triangle.
  3. Wrap the sheets again in a triangle.
  4. Cut off the triangle from one triangle, as shown in Figure 3.
  5. Then make two more cuts on the right and left side, repeating the edge of the figure.
  6. Unfold the part.
  7. The middle cut out part on each petal is wrapped under the first one, as in the illustration 6.
  8. Make the same flower from another triangular workpiece.
  9. Align the second element of the snowflake to make it flat.
  10. Turn the first flower 45 degrees relative to the second and glue it on top.

An unusual snowflake is ready!

The second way to make a three-dimensional snowflake from paper

The most popular way to make three-dimensional snowflakes from paper is as follows.

  1. Take five equal-sized sheets of paper in a square shape.
  2. Bend one sheet in half so that you have a triangle in your hands.
  3. Make cuts, as in the diagram above. The more incisions, the more splendid the snowflake will turn out. The recommended number is three to five.
  4. Open the sheet of paper.
  5. Now gently wrap the carved central diamond and glue its edges.
  6. Turn over the shape.
  7. Glue the edges of the next diamond.
  8. So in turn, turn the shape and glue the edges of each diamond.
  9. When one piece is ready, proceed to the second one. Similarly, make all five elements.
  10. Now you need to glue everything together. To do this, just drip the glue on one end of the part and glue it to the other. So glue all the petals.
  11. If you have a snowflake, then you need to glue the petals together in the center.

Volumetric snowflake is ready! Such an article will look great as a decoration of a wall or chandelier.

Christmas tree ball

Master class, how to make your own Christmas balls:

  1. Prepare the templates for cutting out of paper. To do this, draw a circle with twelve circles. Paper can be taken any other than cardboard. The best toy will look if you take colored sheets or for decoupage.
  2. Cut out the drawn circles.
  3. Fold your workpieces in a pile on top of each other and bend in half.
  4. Spread a stack of circles and fasten them with a rubber band or wire in place of the fold, so they do not crumble.
  5. Now using glue-pencil or thin double-sided scotch, start gluing lobules of circles, each time alternating the junction.
  6. Spread the ball.

The handicraft is ready! So that it can be easily hung on the Christmas tree, attach a ribbon or string.

What else can you make from paper ornaments?

Of paper, you can make a lot of jewelry: different figures, decor elements, pendants on a Christmas tree and so on. Sheets can be folded in the technique of origami, glued together, cut out the scheme.

Sometimes beautiful things come out of the paper. For example, if you take decorative cardboard or sheets for decoupage or crafting and just cut out any New Year's silhouettes (a ball, a deer, a Christmas tree, an asterisk, Santa Claus and so on), make a small hole with a punch or an awl and pass a beautiful ribbon or Twine, then you will get amazing Christmas decorations. It is enough that moisture does not get on them, and such hand-made articles can easily be stored for more than one year.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.