How to make a palm from plastic bottles for decorating a house

Often there are situations when the house accumulates too much unnecessary plastic bottles. Someone prefers to just throw them away. But, if you have the time and ability, you can turn them into something colorful, which will diversify the interior of your house and cause the envy of friends. If you are a fan of exotics, then you will be interested to learn how to make a palm from plastic bottles.

You will need:

- a strong pin about one and a half to two meters in length and slightly smaller than the neck of the accumulated plastic bottles;

- three strong metal pins with a length of thirty to forty centimeters each (depending on the size of your palm it can be welding rods, quality knitting needles or long knitting needles);

- wire or wire for fastening the structure;

- plastic bottles. It is better to take two-liter, green for the leaves and brown for the trunk. The amount depends only on the size of the palm;

- if the wooden pole is short nails with a hammer;

- scissors;

- awl or perforator with a thin drill.

Let's turn more specifically to how to make a palm from bottles. It does not require much effort or unusual skills.

Basic training

There are many ways to make a palm from plastic bottles. The most, perhaps, simple and fast - to string them through the neck to each other. First, wash the building material and remove the labels.

Beginning of production - leaves

Take the green bottles. They need to cut the bottom, then cut them along into three parts, from the bottom to the neck, leaving to stick to the dense part of the threaded neck. Spread the "leaves" outward, cut their edges into thin strips to obtain a peculiar "fringe". Now, if desired, you can bend this fringe with scissors or a flame. Make a large number of such "leaves".

Trunk

The next step in the process, how to make a palm from plastic bottles, is to make the main trunk. Six yank into the ground for thirty or forty centimeters or in another way to strengthen in an upright position. If you know how to handle a welding machine, you can weld the spacers. Now take the brown bottles. They also need to cut off the bottoms. After that, put them on the pin. To make it more beautiful, place the bottles "overlap". For strength, attach each bottle with one or two nails, if the pole is wooden.

Compound

Now he will attach the "leaves" to the "trunk". To do this, use an awl or drill to make three through holes in the neck of the top bottle, closed with a lid, pass the pins through them and plant "leaves" on them. At opposite ends of the pin we have covers from bottles, tightened together by wire (wire must be passed through the bottles of bottles along the pin). For the strength of the design, it is also recommended to tighten the neck of the inner bottles-leaves with a wire.

And now, a palm from a plastic bottle is ready! It admirably beautifies the yard of any house or, in a shortened version, a balcony or veranda. This design does not require watering and green all year round! And if friends ask how to make a palm from plastic bottles - now you know what to answer them!