How to make a ceiling in the bathroom of plastic panels with your own hands

The ceiling in the bathroom of plastic panels is considered the fastest way of finishing. It is visually attractive, allows you to hide defects and disguise the ceiling communications. Next, we will analyze the advantages of the material. The article will also describe how to make a ceiling in the bathroom of plastic panels with your own hands.

Advantages of finishing

The material used for panel production is environmentally friendly. It does not emit and does not absorb unpleasant odors. The ceiling in the bathroom of plastic has a glossy smooth surface. It is easy to take care of - just wipe it with a damp cloth with ordinary detergents. In addition, the surface can be built in a variety of fixtures. Additionally, the ceiling in the bathroom of plastic panels can be decorated with a plinth.

Classification

It should be noted that for finishing there are two types of coverage:

• Direct seamless.
• Imitating wooden lining or blockhouse.

The second option is more suitable for finishing the room in the country style. But in the interior of hi-tech better looks seamless. When installing the joints will be almost invisible.

Calculation of material

Before you make a plastic ceiling in the bathroom with your own hands, you need to determine the right amount of consumable material. Panels are available in various lengths and widths. However, there is also a popular size. The most common panels are 25 cm wide and 4 meters long. To calculate the amount of material, calculate the surface area. For this purpose, the width and length of the room is measured. The obtained values are multiplied. The result should be added 10%. This stock is needed to compensate for the material to fit the size.

Rims

The ceiling in the bathroom of plastic panels is installed on a pre-fastened frame. It can be made from wooden bars or metal profiles. If the first option is used, then coniferous wood is used. Elements of the crate must be well dried and treated with moisture resistant compounds and antiseptics. If the bar is wet, then in time it deforms. Experienced experts do not recommend the use of wood for the crate. The ceiling in the bathroom from the plastic panels is best attached to the metal profile. This crate is not subject to deformation and will create a more rigid and solid foundation. Fixing of elements is carried out similarly to installation of a frame for gypsum board. Preliminary marking is done using the hydro level.

Some nuances

On the initial harness, the beam is fixed around the perimeter. In this regard, the first value is the actual perimeter of the room plus 3%. Bearing elements are located on a long wall 30 cm from the walls and in 60 cm increments. Fixing of all elements of the crate is carried out by screws and dowels. Fastening of wooden bars is performed in steps of 30-40 cm. If the length of the rail is divided by this distance, then you can calculate the number of screws. To the number obtained should be added 3% (for marriage). Fastening of the panels directly to the crate is carried out by galvanized self-tapping screws (25 mm long) with a press-washer. The recommended number of fixing elements is about 200 (at a rate of 16 m ² ).

Additional Items

Fastening of plastic panels is made in a special PVC profile with a guide groove. A ceiling (starting) skirting board will also be required. The amount is equal to the perimeter of the room plus 5%. These elements are of two types. The first option is a combined ceiling skirting and starting profile. The second one is a rake with a groove to install a separate skirting board.

Ceiling in the bathroom of plastic panels: secrets of installation

The coating is installed in a strictly horizontal plane. In this regard, it is necessary to pre-markup. To do this, use the water or laser level. After the layout is ready, the elements of the battens are fastened around the perimeter. Dowels are used to fix the beam. They are fixed in holes previously drilled with a perforator. The beam is fixed in steps of 30-40 cm. From the wall element, it is necessary to retreat 30 centimeters, parallel to it, a supporting element is fixed on the ceiling. The next bar is fixed after 60 cm. From the opposite wall, you also need to retreat 30 centimeters.

Luminaire installation: general information

Before making a ceiling in the bathroom of plastic panels, it should be noted and make holes for lighting devices. In addition, you should lay wiring on the crate. Next, a lining part for the luminaire is installed. Before you make a ceiling in the bathroom of plastic panels, you need to check the performance of all electrical. All wires must have reliable insulation.

Ceiling in the bathroom of plastic panels: self-winding

The profile of the PVC is fixed to the perimeter beam. For this, self-tapping screws are used . The fixing step is 30 cm. To smoothly join the profile, it must be properly cut. For this, carpentry is used. With this tool, the element can be cut at an angle of 45 degrees. Sewing the ceiling in the bathroom from the plastic panels, the elements are adjusted to the required size. To cut off the desired length, use a knife and a construction corner. With a pencil mark the line, carry on the front side with a blade and break the panel. The first plate is set with a spike towards the wall. The element is fixed with self-tapping screws and press screws to the bars of the crate. Preliminarily recommended to cut the spike with a knife. The next fitted panel is inserted into the groove first and gently taped until fully installed in place. The subsequent elements are set in the same way. The only thing that should be remembered is that in the panels under the fixtures a hole is previously made. When you install the last element, the trimming will have to be done not only along the length, but also along the width.

Nuances of lighting

When using incandescent lamps, the wiring for them is diluted immediately after the installation of the crate. When choosing lighting lamps, it should be noted that PVC is a low-melting material, so heating it over 60 degrees is highly undesirable. Installing the ceiling from plastic panels in the bathroom with your own hands, you should choose halogen up to 35 W or incandescent lamps up to 60 W. When laying the cover, the elements in which the fixtures will be installed are first tried on the surface. They make a mark of the location of the lamp. Then cut out the hole and insert the lamp. Then the panel is put in place. For wiring, a copper wire of 1 mm can be used. A connection terminal is used to connect the joints. It will be indispensable in the case where different wires are used. Over time, they can oxidize. To prevent this, the terminal strip is used. All wiring is displayed in a box installed in the wall.

Two-level structures

The second and next tiers of the ceiling are assembled in the same way as the first. On the profile line, which limits the second level, the panels are also cut off. The vertical section separating the tiers closes the strip cut from the panel. From the bottom, at the height transition, the ceiling angle is masked by a decorative element, and on top by a baguette.

Additional Information

If you intend to use a wide skirting board made of polystyrene, you can not fix the profile along the perimeter. If a metal crate is used, the strength of its fastening only to the hangers will be enough to withstand the relatively small weight of the panels. In general, you can install a plastic ceiling yourself with a person who does not have much experience in finishing.