Homeliness, Do it yourself
How to make a cart for motoblock own hands?
In the farm, the motoblock is one of the most useful devices. With its help you can not only process the land, but also transport a lot of necessary things: hay and fertilizers, ready harvest and fuel ... But how to do this, if a standard mechanism of this kind is not equipped with any special devices?
Constructive elements
Conditionally, each trailer can be divided into the following structural elements: the driver's seat and the central frame, the body itself with the body and the wheels. Place for the driver put on the welded frame. Since the main load falls on a very limited area, it is strengthened by stiffening ribs.
Of what to make a frame?
No truck for motoblock, with their own hands which is easy to manufacture, can not do without a solid welded frame. The easiest way to weld it is from the channels and corner, which can be found in every construction shop. Ram should be cooked as neat as possible, as it must withstand all the vicissitudes of the killed rural roads.
What should the wheel axles be made from?
Making the case
So what is the trolley for the motoblock made of? With their hands, the body is easiest to mount from boards with a thickness of up to 20 mm, and at the corners they are reinforced with steel corners. To the frame the boards are fastened to the bolted joints. Since you will probably need to transport large volumes of cargo, it is better to make the side folding: so it will be easier to unload large volumes.
Wheels
You can take them from some agricultural machinery. But if you do not have time to search for them, those of an ordinary motorcycle carriage will do. The axis is turned to the appropriate diameter. This truck for motoblock will have good cross-country ability, allowing you to transport cargo even on bad roads.
Coupling for the trailer is made from any suitable piece of metal, turning in it such a hole that it easily passed the coupler. It is better to make the swivel unit from a bearing of a suitable diameter, fixing it as firmly as possible by welding.
They must be covered with anthers, filling the entire space under them with grease. If they are not protected from the aggressive influences of the environment, your cart for the motoblock (made with your own hands) will not travel a long time in the likeness of roads in our country.
The bottom of the cart
Of course, it can be made from edging boards. But it is much more reliable to put sheet metal for this purpose. The thickness of the sheet is preferable to choose within 2-3 millimeters: such a cart for the motoblock (which you can make yourself in a couple of days by your own hands) can last several years, practically without the need for repair.
As a seat is perfect for a passenger car.
Similar articles
Trending Now