Which seats are suitable for the "Niva"? How to choose the front and rear seats on the "Niva"

Almost every owner of the "Niva" is faced with the need to modernize or repair your car. These changes can concern both technical characteristics, and an interior. And in order to increase the comfort of your car, it is not necessary to completely sort out the interior and suspension - it's enough just to install new seats on the "Niva".

Features of the construction of off-road car seats

VAZ 2121 has a very unusual design of the front seat. The fact is that for convenient landing and disembarkation of passengers in the back row the designers of the Volga Automobile Plant decided to make it reclining. When the side stop is lifted, the backrest is fully shifted to the front stack, and thus a space is removed in the passenger compartment to pass back.

Because of such a complex design, the high reliability and strength of such seats can not be guaranteed. This was the very payback for the comfort, due to which many drivers have to buy seats from dismantling.

But what is most interesting, the mechanism of reclining the rear seatback wears out in only three years of operation of the Niva car. Repair of seats, as you can see, for owners of domestic SUVs is far from new. By the way, even if you do not use the folding device, the backrest can still break.

What is the way out?

The only way out of the situation is to install the seats on the "Niva" from another manufacturer. Most often, motorists acquire them from foreign cars that were in service.

Which seats fit the Niva? In general, the domestic SUV VAZ 2121 can fit any armchair, as its configuration for all cars is approximately the same (with the exception of the mechanism of reclining the back). Here it is possible not to be limited to fantasies and to install any seat you like, from any foreign car. It can be "Mercedes", BMW, "Opel", even "Mini Cooper", in the end.

But the most comfortable are Ford's interior elements. Here it is necessary to distinguish such models as "Fusion" and "Mondeo" of the third generation. By the way, the latter option has a heating function, which will greatly enhance the comfort of the Niva. Many also purchase seats from Japanese cars. Judging by the reviews, one of the best options can be called an armchair with a Mazda passenger car of the Coupe series. As for the German components, car enthusiasts prefer to install the seats from the 124th Mercedes. True, you can buy these only on disassembly, ie, in a state of "used".

Alternative options

Some motorists do not dare to install in the interior of used parts, preferring to order goods from various tuning companies. We can not name a concrete model of seats, since there are more than one hundred of them, but the most popular of them are UNP products. They are presented in the photo to the right.

As you can see, the design of UNP is very unordinary. But, despite their sporty appearance, they are very comfortable and do not tire the driver on a trip.

There are also many other manufacturers of tuning chairs, so the choice is wide enough - for every taste and purse.

We install new seats on the "Niva" - the advantages of tuning models

One of the main advantages is the possibility of their additional equipment. If you order these chairs directly in the atelier, you are given the opportunity to equip them with an electric heating system, an embroidered logo (this may be the emblem of the manufacturer or simply the VAZ logo), adjustable lumbar support, and a tilt mechanism, which is especially important For the owners of "Niva".

Also, drivers note the convenience and comfort of tuned seats. Each of these options has adjustment of the stiffness of the lumbar support, which eliminates the fatigue of the driver for long trips. The landing of this chair is much higher than that of the standard, accordingly, the visibility inside increases. Some models are additionally equipped with locking mechanisms and other technical twists.

As for reliability, then, unlike the standard VAZ, these products are made of high-quality steel, and therefore have a reliable and solid construction. Proof of this is the presence of normalized corners (there are almost every tuned chair). They are often made of metal rolled metal with the dimensions of 5x4x0.4 centimeters.

The cost of used products taken from dismantling, and those that are purchased by drivers in the tuning studio, is almost the same - about 100-200 US dollars per unit.

How to replace the seat on the "Niva" with your own hands?

As you know, on the cars of this model, the seats are fixed only on one side - in front. Difficulties in work will be added to the mechanisms that overturn the backrest for comfortable seating of passengers on the back sofa. By the way, the front seats of the "Chevrolet Niva" have committed others - the body of it is 5-door, so this type of device is not here.

What should we prepare from the tools?

To perform work on the dismantling of the chair you will need a minimum of things, namely the key to 13. It can be a carve or a combination - the design is not fundamental. However, for convenience, it is better to take the ratchet key - so you will significantly shorten the process time.

So, where to begin the disassembly? First it is necessary to unscrew one side of the fastening of the front seats - here there are two fixing bolts. After one part is unscrewed, proceed to the second one (the work is performed similarly to the first case). All manipulations are made with just one key to 13. All, after unscrewing a few bolts, you can safely install new seats on the "Niva". Installation is in the reverse order.

How to remove the rear row of seats on the car?

Replacement of the rear "sofa" on the "Niva" will require a different approach. In this case, to perform the work you will need two keys - 10 and 13 millimeters.

How do I remove the rear row? The first thing to do is to take the trunk mat aside. Then you need to unscrew the fixing nuts of the backs to the cross member. They are six on old models of the Niva. Then you can safely remove the back of the sofa. Then the pillow of the rear seat is raised, four bolts are screwed out, fastening the structure to the floor of the car. Everything, after that, it remains to remove the cushions and install new seats on the "Niva".

In general, you will spend no more than 30 minutes of free time on each job.

So, you found out which front seats are suitable for the "Niva" and how they can be replaced. Good luck!