How to glue linoleum to linoleum: practical advice and effective ways

A modern range of flooring materials can surprise an arbitrarily sophisticated consumer. He is relentlessly replenished with new products, which amaze the imagination. However, the time-tested linoleum finds its fans today. He has many advantages, which attracts attention. Before acquiring it, you should familiarize yourself with its features and, if necessary, decide whether it is possible to lay this coating on the old one, the same.

Can I lay linoleum over the old

If you are thinking about how to glue linoleum to linoleum, you must have decided for yourself the question of removing the old coating. Laying new material does not require the creation of a substrate, if you lay the coating in two layers, the floor will get warmer. However, experts still recommend removing the previous layer, only then you eliminate the problems that may arise during operation.

When people decide how to glue linoleum to the floor, they think they will be able to assess the condition of the rough coat after removing old materials. This belief is true. The condition of the screed must be checked and its repair carried out, if such a need arises. In the process of using the flooring material, dirt and dust accumulate under it, mold and mold, as well as fungus, can arise. If you decide how to glue the linoleum to the floor, getting rid of the old coating, then this will eliminate the above troubles, as well as protect new material. Among other things, this approach makes the atmosphere in the house safer and healthier.

If the old cover has holes, blisters and cracks, all kinds of irregularities, then the new linoleum will quickly become worthless. Although it can not be called the most demanding material, it still needs a clean and even surface. This approach allows you to evenly distribute the load, excluding possible damage to the coating on the inside.

If you are faced with the question of how to glue linoleum to linoleum, then you should remember that this approach will not only make the floor warmer, but also soft. However, in this case, we should not always expect a positive result, since the furniture legs will certainly push the surface. As practice shows, the material can be glued to a clean substrate more qualitatively. How to properly paste linoleum, will be described below. But if you decide that the removal of the old layer will not be carried out, then you should consider all the pros and cons, only then you can start laying a new finish coat on the old material. However, this should not be done, if the previous layer was badly damaged and covered with waves. This can cause the new coating to repeat these changes and begin to tear.

The technique of laying a new coating on the old

If, while thinking about how to glue linoleum to linoleum, you still decided to use this technique, then as a plus of technology is that you will not raise old dirt and dust. In this case, the old layer can be used as an additional substrate. However, here there are questions about what to use for gluing, whether it is possible to use glue compositions at all, or whether it is best to prefer other fixation methods. If you still decide to use the non-recommended technology in a room larger than 20 m ² , then recommend to consider the universal adhesive FORBO 525 EUROSTAR BASIC. When it is used, a solvent is used, it has an increased adhesive capacity and is easy to apply with a notched trowel.

Some believe that fixing a new linoleum with furniture and skirting is not enough, while you can use the option of using double-sided scotch. Adhesive tape of special purpose will allow to glue the material between layers. But with the use of glue, it is best to allow the compound to dry for several days, this will take about 4 days.

Alternative ways of laying the old coating on a new

If you are still thinking about how to glue linoleum to linoleum, then you can apply latex glue, as well as the limestone composition "Bustilat". Suitable and PVC-glue for pile substrates, which is applied with a notched trowel. If you did not manage to lay one piece of material on the whole area of the room, then it is necessary to fasten the canvas with transparent cold welding.

For reference

When deciding to use glue, you need to consider the prospects when you will have to change the flooring again. In this case, you will spend a lot of money to dismantle the pasted cake. If you still do not want to remove the old layer, you can do without glue, and on an area of 20 m ² such a solution will be the most suitable. With more impressive areas, you can use the clamp skirting boards. With the help of objects you can fix the roll material.

Linoleum laying on a clean floor

Many home masters have often thought about replacing the floor covering, what better to do in this case and how. Stick on linoleum or put it just like that, crushing the skirting boards? If a decision is made in favor of the first variant, then a reactive adhesive composition can be used for this. They are a complex chemical compound, which is created on the basis of epoxy resin and polyurethane. After the glue reacts with the coating, firmly attaching it to the surface, a rigid intermediate layer will be obtained, characterized by durability, resistance to mechanical stresses and water resistance.

If you are faced with the question of how to glue the linoleum to the concrete floor, then a reaction composition can be used, which is excellent for a material on a fabric basis. Such mixtures are simply indispensable for the flooring of commercial linoleum, which will be used in production facilities.

Methods of work

Reaction glue will help to lay commercial or household linoleum, gluing it on the joints. However, the material must be cut off taking into account the combination of the pattern. As a result, you will be able to get an almost imperceptible transparent seam, which will only show up to the touch.

Along the edge of the composition is applied with a deviation from it. After the linens are laid, rolled with a roller, and then you can proceed to install the second half of the fabric. If you are thinking about what can be glued linoleum, then as an alternative solution is still used polyurethane two-component composition, with which you can get a tough and durable connection. Sometimes used and water-dispersion composition, which is odorless and environmentally friendly.

How to remove linoleum

If you are faced with the task of removing the glued linoleum, then you can use a technique that involves the use of a mechanical method. The coating should be moistened with a warm soap solution, which will quickly get rid of the adhesive layer.