Veneered panels for walls: description, ideas, reviews

Today, to afford to use in the repair of premises environmentally friendly and natural materials can not all, because they are quite expensive. But if we are talking about veneered panels that are used for wall cladding, then this material can be called relatively inexpensive. Among other things, it has many advantages of wood, and the surface is capable of imitating natural material.

Description of veneered panels

Veneered panels for walls are a thin section of wood, the surface of which preserves the pattern and structure of natural material. It began to be produced quite a long time ago, several centuries ago, however, large-sized continuous sections appeared only with the invention of high-precision equipment and machines that work with any sorts of wood, different in density. The veneer is used for the decoration of walls, as well as for interior doors. The material is glued by hot pressing. For production, almost any wood that can be applied to exotic and inexpensive breeds is suitable. The grade will depend on the value of the product.

Positive feedback on veneered panels

Veneered panels for walls, reviews about which you can read below, have many positive features. Among them, users note the main advantage, which is expressed in environmental friendliness. Among other things, work with the material is not accompanied by the formation of dust and dirt. Coverage is quite easy to collect, but if one of the sectors is damaged, you can replace it with a new one, but you do not need to disassemble the whole surface.

Users like that with proper wall finishing with veneer panels it is possible to increase the sound and heat insulation of the room, these qualities are more impressive if you install heat insulation material between the rails. Cladding the walls with veneered panels allows you to get a surface that is easy to care for. The base can be simply wiped with a damp rag. The walls are reliable and durable, but they look very attractive. The surface will imitate different wood textures. Consumers emphasize that when you visit the store you can choose panels that are in an acceptable price range for you. Everyone will find the right material for themselves, which can be inexpensive or can be related to the premium class.

Negative feedback

Before you attach the veneered wall panels, you need to make sure that you are familiar with all the shortcomings of this material. Among them, consumers note that it has all the drawbacks inherent in wood. The latter has a rather low moisture resistance threshold. Despite the fact that today there are panels for finishing bathrooms and kitchens, when the neighbors flood the material, it will swell, then you will have to change the entire paneling. Among other things, consumers also emphasize low strength. If you hit the surface with a sharp object, it can ruin all the beauty. Calms only one thing, that the damaged element can be replaced, while the entire structure will remain intact. However, it will be possible to do this only if there is an additional element at hand, so experts recommend purchasing the material with a margin. The finishing of the walls with veneered panels has one more drawback, which is expressed in fire hazard. Therefore, it is necessary to operate the premises very carefully. Wiring, according to users, should be hidden in a special corrugation, in the event of a short circuit, it must independently extinguish the spark.

Ideas for installing veneered panels

Veneered panels for walls can be mounted in various ways, one of them involves the use of glue, the other - of aluminum profiles, while the third involves the use of connecting plates, which are also called rusts. The first method can be used only when the walls are perfectly smooth and even. It can be, for example, about drywall. If such conditions in the room are not met, the preparatory stage is the installation of a frame made of wood or metal guides.

Installation on aluminum profiles

If you use this technology, the panels are reinforced end to end or to the visible part of the profile. The latter performs a decorative role. The profile can be unpainted or trimmed in a shade of wall panels. The principle of installation is quite simple, it consists in the fact that the aluminum profile is fixed to the frame, the distance between the elements should be equal to the length of the panel. Cloth is installed in the grooves. If the walls are even, then you can eliminate the stage of installing the lath, leveling the surface with the profiles themselves, using plastic or wooden pads.

Application of decorative strips

Veneered panels for walls can be installed using decorative connecting bars, which are rusts located between panels. The surface eventually turns out to be three-dimensional, which decorates the interior and makes it unusual. Depending on what will be the design idea, the rust can be made of aluminum or stainless steel. Sometimes veneered MDF is used. Especially attractive are the walls, which are decorated with panels, the shade of which is somewhat lighter, in comparison with the color of the decorative strip. It should be noted that the wall panels for installation on the rust should have grooves on the end faces.

Technique for the installation of panels using rusts

Veneered panels for walls should be installed in several stages. On the first on the upper edges of the vertically oriented crate, it is necessary to fix the clamps and install the first panel with them. Installation is from top to bottom. The same panel at the next stage is fixed by the Kleimers from below, the following fasteners are installed under them. Thus it is necessary to watch that the tooth of fasteners was located correctly.

The decorative strip is trimmed along the length, after which it becomes possible to fit it into the groove provided on the panel wall. The following products are strengthened by the upper clamper. The actions described above should be repeated until you reach the floor. If the last painting requires trimming, the cut must be decorated with a plinth. When MDF veneered MDF panels are installed for the walls, in the next step the rust is cut to the height of a certain row and installed into the side grooves. In addition to rusts, additional elements may be required by the type of horizontal frieze, universal corner and finishing strip.

Additional ideas for the use of veneered panels

Veneered panels for walls, the ideas of using which are described in the article, can be used together with other decorative elements of the interior. For example, if the canvas is not installed end to end, but with some rupture, it is possible to install light elements inside the frame on which the decoration is mounted, they will create a unique effect in the living room or bedroom. In addition, such walls can be decorated with curtains, which is especially important for socle floors, where there are no windows and there is a need to create an effect of their presence.

Veneered panels can become part of the interior, decorated in a modern style or country style. In the latter case, the design of the room can be supplemented with white curtains and a window opening in the form of a circle. If it is a question of a bedroom it is necessary to pick up a coverlet under color of wood. The country style can be more refined, with the wall panels usually have a white color and are matched to the furniture, as well as numerous shelves and hangers that will reflect the style.

Cost

Quite often, when decorating the interior today used veneered panels for walls, St. Petersburg offers to visit stores where you will find this product in a wide range. Its cost will depend on the manufacturer, the material in the basis, as well as the structure and dimensions. For example, for panels whose dimensions are 1000x550 mm, you will have to pay 2035 rubles. But if the dimensions increase to 2400x500 mm, then the cost will be equal to 5300 rubles. These panels have an edge, and the material is delivered in a soft package.

Conclusion

Selecting veneered panels, you can choose one of the existing methods for their installation. If you choose the way in which the products are butt-ended, you will eventually form a low-notice line at the connection point of the panels. This will not spoil the overall appearance of the surface due to the texture of the material. Panels can be installed and with a 5-mm gap, this gives the general appearance of the walls a relief. When installing through the gap, the ends should be toned or covered with an edge.