How to fix the toilet with plastic panels? Councils in resolving this issue

At present, construction shops are crowded with a large number of materials for finishing various premises. To repair the toilet, an excellent solution will be to choose plastic panels, which are very convenient for installation and use.

When carrying out repairs to the toilet room, the question arises as to how to cover the toilet with plastic panels.

To carry out the finishing of the toilet, it is necessary to have hangers, plastic panels, ceiling skirting, stapler, knife, rails, profiles - starting, finishing and corner, screws, dowel-nails, construction level.

Before you cover the toilet with a plastic panel, you should take down the dimensions of the room in detail, that is, you just need to know its width, length and height. Also it is necessary to think up, than to close the communications passing in a toilet. In this case, they can be disguised by the same plastic panels that will be used to finish the toilet room.

After preparation, you need to decide on the color and size of the plastic panels, when choosing which ones, you should pay attention to their width, as this indicator ensures correct calculation of the required number of panels so that the wall covering with plastic panels looks perfect. If the walls in the toilet are uneven, then you will need to create a frame from the racks to ensure alignment. The size of these racks should be 10 - 50 mm.

At the initial stage of finishing, it is necessary to carry out the processing of the racks with a special composition that will provide protection against fungus and mold. After the drying of the slats, you can proceed to collect the frame for attaching the panels of plastic. For this assembly, it is necessary to measure and saw four horizontal strips from these rails. Then, with the help of the building level , the resulting strips should be fastened with the dowel as fast as possible to the wall. Also it is necessary to take into account the fact that the attached slats should be placed parallel to each other.

After the carcass is prepared, it is possible to fasten the plastic panels. First, you need to decide on a place from which it will be convenient to begin plating with plastic panels. After that, the corner or starting profile is fixed on the frame using screws or a stapler. Then the first panel is inserted into the profile, and the next panel is inserted into each other and fixed to the frame.

When covering the toilet with plastic panels, it is recommended not to cut all the plates beforehand, because due to the nervousness of the walls, ceilings and floors, it may turn out that the previously prepared panel will have to be thrown out, because it may not fit the size. Thus, the cutting of the panels must be carried out immediately before the installation of each of them.

Observing all the above requirements and rules, it is easy to answer the above question - "How to fix the toilet with plastic panels?"

Fastening of the ceiling frame should be carried out on direct suspensions, and it is recommended to cut out the holes for the fixtures using an acute knife. In the gaps obtained, you can easily insert a ceiling skirting board.

And how to sew with plastic panels toilet with absolutely smooth walls, floor and ceiling? In this case it is recommended to use the method of frameless installation. With this method, the panels are attached using dowel-nails or mounting glue.