What is the difference between the installation of corrugated roofing and fences?

Today, the construction market pleases its diversity and assortment. Here, along with materials that have long been in demand, there is a wide selection of their modern counterparts. Profiled sheeting can be attributed to both, and to others. He first appeared in England in 1820. In Russia, this material has been produced only since 1968, but today it occupies stable positions in the market. Low cost and simple enough installation of corrugated board allowed him to move into the category of demanded building materials.

It is produced from rolled galvanized steel with various coating options. Most profiled sheeting is used for roofs and fences, but can be used in the construction of walls. The thickness of the sample is different and varies from 4 mm to 15 mm. The coating of the sheet can be made of polyester or polyvinyl chloride, acrylic and polyurethane are also used. A feature of the profiled sheet are corrugations of various configurations that run along the entire length. Their height, shape and quantity can be different. It depends on the purpose for which the corrugated board is selected. The color scale is extensive and allows you to choose the option that meets your wishes.

According to the marking adopted in GOST 24045-98, three main varieties are distinguished:

C - sheet used for fences, walls or partitions.

H - used in the arrangement of the roof.

NS - has a wider application (it can be used for fencing and roofing).

The way the corrugated board will be installed depends on the purpose for which you use it. Mark is selected in advance. The thickness of the material and its quantity are also determined, and the dimensions of the corrugation are chosen not only in width, their height also has a value. For the protection of the site, it is better to use sheets C or NS (the height of the corrugation is from 8 to 35 mm). The thickness of steel can be only 4 mm, but it is better to choose a double-sided coating.

From the general design of the plot depends also the installation of fences made of corrugated board. This universal material is easily combined with wood and metal. Installing wooden, metal or stone pillars, fix the horizontal lags. They can also be made from any material. Determine the number of poles required, based on the size of the section and the width of the profiled sheet. Then prepare the hole and screw the sheet with screws made of galvanized steel.

For metal bars, welding may be required. To simplify your task, it is better to use a set of metal sheets and fasteners (in the form of collapsible structures). Installation of corrugated board in this case is simple and convenient, however, the price of fence slightly increases. But in this situation, you choose. At the device of a fence of a corrugation it is better to have vertically.

Profilists have found wide application and as a material for roofs. Here, H or HC is more often used. You can use coated steel on one side. Installation of roofing sheeting differs from all other features. Under it, prepare the crate from the beam in steps of less than the width of the sheet. Begin laying from the bottom of the roof, leaving the overhang (to protect the wall). Each next sheet comes on already laid lower rows, protecting against moisture ingress. To the roof gave heat, it is necessary to put a layer of insulation on the lath, protecting it with a moisture-proof film, and then lay the profiled sheets. It is better to mount the corrugated board with a special fastener, which also protects from moisture.