Homeliness, Building
How to glue linoleum: the features of the process
If you decide in the room to replace the floor covering, then the surface for this must be prepared. For linoleum the base should be as flat as possible. However, even after its laying, it is necessary to do some work, which will give the coating a complete look. For example, it will be useful for you to know how to glue the linoleum correctly, which methods (and means) are used for this.
Before you glue the linoleum with hot welding, note that you must have little experience with special equipment or at least be able to understand the principles of its work. Also try to practice on an unnecessary piece of material. The fact is that the gluing is carried out under the influence of a very high temperature, so you must strictly follow certain safety rules. Also, try not to burn the material. The disadvantage of this method is the high cost of the work, after all, the expert is usually invited to the procedure.
If you do not know how to glue the seam of linoleum quickly, try applying double-sided scotch. However, this requires that the base base be very clean and dry so that the strip can adhere well. Please note that this connection of the material is short-lived, since with active use of the coating, the adhesive tape rapidly loses its properties. In addition, this method is minimally reliable and leads to dirt entering the linoleum.
The most effective method is welding after all. So your seam on the floor will be almost invisible. Naturally, you need to fold the picture correctly.
Similar articles
Trending Now