House from the heating unit: feedback from the owners. Houses and cottages from heating blocks

Heat block acts as a high-tech product, obtained in the process of construction industry professionals. It is used for the creation of external enclosing structures, as well as buildings for various purposes, inside which the conditions of normal humidity and temperature will be maintained.

Heat-block features

The heat block is also called a polyblock, it is produced by the method of volumetric molding. At the heart of the product is claydite-concrete, which is connected to insulation layers made of expanded or extruded PPS. In addition, the unit has a face that performs the role of a decorative coating made of a textured artificial stone coated with coloring substances.

Reviews of consumers about the characteristics of houses from heating units

A house from a heating block is widely distributed among consumers for many reasons, the main one of which is expressed by the heat-saving characteristics of such buildings. Despite the fact that the described blocks appeared relatively recently in the building materials market, they managed to occupy a worthy place on it and gradually gain the status of a leader among alternative solutions. Today, the polyblock is gradually replacing brick, foam concrete and wood.

Another positive feature that attracts private developers and professionals is the price. The buildings have a low prime cost, but look very attractive in appearance, differing in high operational qualities. The house from the heating block has the first, higher, class of capital of buildings for which the frame is applied. In our time, environmentalism and naturalness are especially appreciated. A heat unit is completely harmless to health. Quite often, if not always, the consumer in the process of choosing the material for the house takes into account the qualities of resistance to fire and the duration of the service life. The mentioned buildings meet these requirements, which is especially important for private construction.

Reviews about the economy in use

If you decide to build a house from heating units, then you will be able to save at every stage of the work, as well as when living in a building. These statements are not unfounded, as you can be sure, after learning that the surface of the products does not involve finishing the exterior walls. The house does not need to put plaster on its surface, it allows to save about 1500 rubles on one square meter only. But if during the operation there is a need to update the appearance of the house, the walls can be painted using, for example, an airbrush or other familiar tool.

Save, building a house from a heating unit, it will not only be on insulation materials, but also on heating resources. After all, the polyblock itself keeps the accumulated heat perfectly, which eliminates the need for sealing the walls, ceilings and floor. Moreover, the owners will have to spend less money on heating resources (about 3 times).

It will also be possible to save on air conditioning in the summer, since the heat block creates a thermos effect, without letting the cool air out when the temperature is high outside the window.

Reviews about the economy in construction

The house from the heating unit allows to save considerably in the process of construction. Thus, the masonry, the final area of which is 100 m ² , will cost about 50 000 rubles. Even greater savings will be provided if using a conventional solution, replacing them with an adhesive mixture.

The owners gain a more impressive internal space, as the described block has a thickness of about 30 cm, which provides an additional 12 m ² per 100 m ² . If you compare the parameters of the walls of the foam block or brick, then with a similar thermal insulation the latter will be 2 times wider.

As you know, a very large part of the cost of the whole house is the foundation, but the base can cost much less if it is a house of heat-blocks. Responses of owners on this issue are only the most positive. After all, these products have a low weight, which means that they do not exert such an imposing load, as, for example, brick. So, 1 m ³ polyblock has a smaller mass, in comparison with the same volume of bricks, 3.5 times. This allows you to reduce the cost of erecting the base. One-storey building made of a heat block can be installed even on screw supports.

Features of construction works

Practically there are no such materials, which during construction would not require sound insulation or in applying protective means against insects and decay processes. An exception in this respect is the house from the heating units, the owners' testimonials confirm this. The products are based on porous claydite concrete, which has excellent sound insulation characteristics. Moreover, it is biologically inert, indicating that it is of no interest to insects and microorganisms.

If there is a need to cut the unit during construction, then this can easily be done. Just do it in the Strokes, and drill a hole. But, despite this, the heat-efficient product is characterized by high strength.

If you do not intend to use the reinforced concrete frame in the process of work, but you want to use the heat blocks, the houses' designs allow building up to 12 m. Whereas in the presence of a skeleton the number of storeys is not limited. To create interfloor overlapping, you can use any technique, including the installation of reinforced concrete slabs.

Reinforcement during construction from polyblocks is produced by reinforcing mesh, filled with masonry glue in such volume, which will cover the rods. Stacking steel elements is necessary in every 4th row of masonry.

Cost of construction

If you are interested in the cost of the house from the heating units, then you can compare with the price of a brick building. One square meter in the first case costs 35% less compared to the same area of the finished brick wall. This is due to the fact that the brick needs not only in the insulation, but also in the finishing works.

But if you order a turn-key construction, the finished building will cost differently, depending on the area. So, 1 m ² will cost the consumer 20 000 rubles.

Positive characteristics

• Excellent quality of heat savings.
• Economical construction.
• Sound-proof characteristics of walls.
• No need to carry out exterior finishing.

The project of the house from polyblock

If you finally decided that the basis of your future housing will be heating blocks, you can choose house designs yourself or order the creation of those from professionals. If you choose a single-story building with an area of 86 m ² , the living space will be limited to approximately 47 m ² . At the same time, it can accommodate one family consisting of three people. Decorative materials that will be included in the polyblock can be selected even before the commencement of construction work, this will allow to obtain a construction with a unique design. Such houses from the heating units, the price of which will be approximately equal to 1,548,000 rubles, provide comfortable living conditions.