Grand Line - drainage system. Description, installation features

Gutter system for the roof is a whole complex of products, which is responsible for the qualitative and timely removal of liquid from the roof. They can be made of different materials. Once the water is in the gutter, it enters the sewer system or soil. If the drainage is made correctly, it will allow to preserve the original appearance of the building and its reliability and exclude premature wear of the materials.

In the open spaces of the modern market, you can find gutters, which are presented in a wide range. Among others, the Grand Line is particularly noteworthy. The drainage system of this company has an acceptable cost and excellent technical characteristics.

Description of drainage system of brand Grand Line

The production process of the Grand Line is constantly being improved and modernized. New technological developments are actively introduced, specialists are making additions to the production process, which makes it possible to obtain a product that has no analogues in its segment.

Grand Line - drainage system, which produces a special alloy of steel, obtained by the technology of cold skating. The surfaces of the products are galvanized, which guarantees protection from external influences. The thickness of the elements is 0.6 mm, whereas from the top the drainage systems are covered with a polyurethane substance, the application of which allows improving the technical characteristics.

Grand Line - drainage system, which has:

• Resistance to chemical attack;
• Rigidity;
• Strength;
• Resistance to ultraviolet light;
• Excellent protection against rust.

If we compare polyurethane with plastosteol and polyester, then the first material in terms of its technical characteristics is an order of magnitude higher than the rest. With its help, it is possible to obtain products that can be used for a wide range of temperatures ranging from -60 to +120 ° C.

To increase the reliability, the drains are covered with polyurethane on both sides. The manufacturer guarantees that within a decade from the beginning of operation the drain will retain its original appearance. For 25 years of operation, it will differ in the unchanged technical characteristics.

The manufacturer uses another kind of protection - Aluzinc. It is a galvanic substance that provides corrosion resistance and color stability for the entire service life. Grand Line is a gutter system that is covered with organic matter EasyfilmS, responsible for ensuring that the products do not leave prints after touch. In addition, this processing also guarantees mechanical protection so that the products are not damaged during installation and transportation. Such gutters can be operated with an even wider range of temperatures, which ranges from -60 to +315 ° C.

Mounting Features

Described drains are simple design, so you can install them yourself. However, before starting work, it is important to stock up a certain set of tools, among them:

• Rubber or wooden mallet;
• hacksaw;
• Scissors for metal;
• measuring tool;
• screwdriver;
• Pliers;
• Cord for marking.

Installation of hooks

Installation instructions for the drainage system Grand Line involves the installation of hooks. First, use long hooks for the gutters, which should be in place before the roofing material is laid. For fixation, use a cornice board or rafters. The final solution will depend on the configuration of the roof and the wishes of the owner.

If the roof is already equipped, then you can do with a short variety of hooks, which is strengthened on the front board. The distance between the fasteners remains unchanged and is 0.6 mm. For convenient drainage into the funnel, these hooks should be installed with a small offset.

Installing funnels and stubs

Metal gutter system Grand Line provides for craters and plugs. To do this, cut the holes in the gutters, where you plan to arrange the funnel. The width of the hole will be equal to the limit from 100 to 110 mm, if the system has dimensions equal to 125x90 mm. The width increases to a limit of 120 to 130 mm, if the dimensions are equal to 150 × 100 mm. The distance between the end of the gutter and the funnel should be 150 mm, while 15 mm should be left as an interval from the cut to the top edge.

Methods of work

The funnel should be installed on the gutter, it can be fixed with a lock connection, bending the latch inward. The plug will be located on the same ends of the chute, which are not adjacent to other components of the system. For reliable sealing of joints, the appropriate composition should be used, rivets can additionally be used. Connections are sealed with a rubber mallet.

Installation of troughs

The drainage system Grand Line 125x90 mm will have a gutter, the installation of which should be carried out according to a certain technology. One of them is installed inside the hook, and then it is put into the lock and fixed with the help of a plate-type part. In the manual you can find information that the lower part of the gutter should be placed above the inner side by 6 mm, this will prevent liquid from getting onto the facade.

In place, you need to install a curtain rod, which is wound inside the gutter from below, this will prevent the frontal surface from getting wet. Under the bar is a waterproofing that guarantees unhindered drainage. Complaints are combined with special elements with rubber gaskets, which allow to compensate for the temperature expansion, providing tightness.

Conclusion

The drainage system Grand Line, the price of which will be made up of the cost of individual elements, assumes the presence of a semicircular gutter, a connecting chute and a plug. If the size of the gutter is 150x100 mm, then the semicircular version of it will cost 1092 rubles, while the connector costs 198 rubles. As for the stub, then it will have to pay 167 rubles.