Gas equipment for a car (5 generation): device, operating principle, installation, prices

At present, the HBO vehicle installation is very popular. This is due, first of all, to saving money for the purchase of fuel for transport. This equipment is a device that makes it possible to store and deliver gas to the motor, with which the car moves directly.

Now for transport widely used such types of fuel as methane, butane and propane. Depending on this, special gas equipment is selected for the car (the 5th generation is the most advanced system). For example, diesel engines work simultaneously on two types, single-fuel engines - respectively, on one, and two-fuel engines are equipped with an independent supply. Each of the above systems has its own individual characteristics, but the general qualities are also present.

Gas equipment

The increase in prices for gasoline led to the fact that the owners of vehicles began to look for alternative solutions. The use of gas made it possible to save about 40% of the fuel. But this kind of savings can only be if you install high-quality gas equipment on a car (5 generation, it is worth noting, exactly what is needed in this situation). Famous producers, whose products have already proved themselves only from a good side, try to improve their products every year. High-quality HBO are sold as a whole system, as well as separate parts, each of which is packed in special packages. The relevant documentation must be attached to any part. Be sure to check the certificate in the process of purchasing the equipment and carefully study it.

The appearance of HBO 5 generation

Appearing, gas equipment of the 5th generation (reviews at that time were different) made a furor. The car owners could not imagine that the previous "miracle system" would be improved. HBO 4 generations in almost everything is perfect, it worked flawlessly. However, with the release of new equipment, the opinion of the owners of vehicles immediately changed.

In the main, the impetus for the development of the automotive industry was the impetus for the production of HBO 5 generation. Increasingly, they began to produce machines that were equipped with the latest power units and motors. It is worth noting that this type of equipment is ideally suited for gas equipment of the 5th generation. The price of installation depends on the type of engine. For example:

• On four-cylinder - from 80 thousand rubles;
• On the six-cylinder - from 90 thousand rubles;
• On the eight-cylinder - from 110 thousand rubles.

Installation of the filter on the gas cylinder in general prices is not included, its installation is possible for an additional fee of about 4 thousand rubles.

Advantage GBO fifth generation

Gas equipment for a car (5 generation) has many advantages in comparison with its predecessors. Let's look at the main ones:

• The gas nozzle opens in 2 ms;
• Fuel supply is fully automatic;
• Uninterrupted connection of the gasoline and gas unit;
• The reducer is made on the basis of membraneless technology;
• Combining the settings of gas and petrol injectors;
• In comparison with the fourth generation, the service life of equipment has doubled;
• Harmful substances in the exhaust gas is much smaller than that of its predecessors.

Disadvantages of gas equipment

• The main disadvantage, which has gas equipment on the car (5 generation) is a fuel pump. Unfortunately, it very quickly goes out of order, however, not because this part is produced poorly. The main reason lies in the impurities contained in the gas.
• The price policy of such equipment fully complies with the latest standards, it is worth noting that the cost of the 5th generation system is much higher than the price of previous samples.
• Installation may require the assistance of qualified personnel.
• Gas equipment of the fifth generation is incompatible with methane.

Important points

If, nevertheless, it was decided to install HBO for your car, then in this case, you should consider when choosing the following nuances:

• The gearbox must fully comply with the motor power parameters;
• The choice of rail is affected by the number of cylinders in the engine, as well as its configuration;
• The operation of the controllers must occur synchronously with the diagnostic system, it follows that if the vehicle is a new model, then the controller must fully comply with it;
• Cylinders are classified according to the type of gas, type of installation to be performed, and their volume.

Installation of gas equipment 5 generation

Gas-balloon equipment is divided into five generations, consider the installation of the latest.

Naturally, the most optimal option is to purchase a vehicle with an already installed factory equipment. Proceeding from this, it is safe to say that this device, released from the factory complete with the machine, can significantly reduce the financial costs of registration. Also, the degree of quality assurance increases.

But in the event that you decide to perform the installation yourself, you can use the following rules:

1. First you need to open the hood and find a place that will be designed for the gearbox. During the selection process, it should be remembered that its attachment must be made solely on the main frame of the vehicle. Hoses are stacked very neatly, avoiding the occurrence of bends. After the gearbox is already attached, you can proceed to the connection of the hoses of antifreeze. This should be done through a special tee that will be parallel to the system.
2. Then you can proceed to install the gas cylinder itself. The installation is carried out in such a way that the tubes intended for filling and supplying the gas are correctly positioned. After that, you can safely supply gas to the collector, make the necessary tie-ins, and install the injectors.
3. In conclusion, the entire electrical part must be connected. This can check the operation of the installed system and start the engine.