Garden paths with their own hands with low costs from improvised materials. Examples of design, size, photo

The first thing that, as a rule, pay attention to those who crossed the gate of a suburban area or private territory, is a garden path.

Necessity of arrangement

It provides not only an aesthetic appearance of the landscape, but also makes it convenient to use the territory. After all, it is not always pleasant to walk on the grass, wet from rain, or on clay soil. Garden paths with their own hands with low costs can be performed with ease. However, to begin with, it is necessary to determine the design features of this element.

Varieties

At different sites, you can find all kinds of tracks, based on different materials. If we talk about garden paths, they are a natural element of the territory. They are not planned specifically - they are usually simply compacted with feet or compacted with garden tools. If you decide not to make garden paths with your own hands, the shapes of which can be very diverse, but simply leave the trampled path, then you should take into account all its disadvantages. Among them, one can distinguish the formation of mud after heavy rain, overgrown with weeds, and also permanent puddles. Therefore, such an element can be used only temporarily. If there is a desire, then the path can be refined, for this purpose, cobblestones, curbs or paving slabs are laid along the edges, which has remained from laying the parking lot.

Paths with base

If you will arrange the garden paths with your own hands, with low costs, it is possible to carry out these works. To do this, it is necessary to slightly modernize the above-described variety of path. At the initial stage, a ditch is pulled out, the depth of which is 100 millimeters. On its bottom should lay geotextile, whose density is equal to 150 grams per square meter. The sides of the canvas can be strengthened with a curb tape. Now in the course will go pebbles, screenings, marble chips or crushed stone, depending on what you left behind after building a house. One of these materials must be buried on the bottom. If this option seems too simple, then the surface can be laid slabs of natural stone or concrete, which can be arranged in an orderly or chaotic manner. In order to ensure the convenience of movement, the slabs must be recessed in the backfill. Thus, these materials should end up on the same level with the earth's surface.

Gulf tracks

If you want to lay out your garden paths with your own hands at low cost, you should certainly think about what loads the surface will undergo in the process of operation. If they are impressive, then the coating is important to make the most durable. In this case, the base must be concrete, whereas on the surface it is necessary to lay decorative elements in the form of natural stone, tiles or paving stone pavers. Well, if all these materials you have available, this will eliminate the purchase of a new coating and give vent to fantasy. As a result, the territory of the site will find its natural appearance. It is best to make the manipulations in such a way that the surface rises above the ground by 70 millimeters. This eliminates the erosion of sediment sediments.

Making a path from wood splits

If you want to equip the garden paths with your own hands from the spits of the tree, you will make the path the most budgetary and attractive in appearance. Today this approach is considered very popular. In addition to cutting, you can use wooden bars. If you want to work in a dry climate, it is permissible to use not only wooden bars, but also thick boards that can be purchased at a low cost in the building materials store. It is best to choose the hard rocks. To perform the work, it is necessary to prepare lengths of the same length, this figure should be equal to 100 centimeters. The width and thickness should be equivalent to 30 and 20 cm respectively. Next, the workpieces are stacked on sand or gravel.

Features of work

If you will make garden paths using this technology, you should consider the reviews in advance. Home masters emphasize that when using bars they must be treated with fuel oil or a special substance that is able to protect the material from rotting and exposure to moisture. For this, liquid asphalt can be applied to the underground surface of the bar, in some cases traditional sand preparation is replaced. If you decide to use such a combined coating in your work, then it is recommended to start and carry out the process in the autumn, this is due to the fact that in winter the soil settles down, due to this you will be able to achieve natural ramming.

If the territory has fallen old trees, then from them you can make an excellent path. Garden paths with their own hands can be formed at low cost. To do this, the trunks need to be sawn into separate parts, and the resulting elements, which will be spits, should be used for manipulations. Equally well, such an element of the exterior will look near the flower beds or near the lawn. In work can be used not only thick trunks, but also massive branches. Spilled, formed from them, you can fill the large elements. If you decide to make garden paths with your own hands at low cost, the size of such elements should be thought out in advance. However, it is important to keep the technology of work. In order to extend the shelf life of wooden products, they are treated on all sides with hot linseed oil. This procedure should be carried out in two approaches. Between the saw and the ground, it is necessary to lay a geotextile cloth, which is sometimes replaced with polyethylene.

Arrangement of a path from paving slabs

Quite often, the owners of private and country houses have paving slabs after parking space for the car. In order to use any materials on the farm, excluding their storage in the barn, you can apply these products to arrange a functional garden path. For work it is necessary to prepare a wooden kiyanku, pegs, a building level, a rake, a watering hose, manual ramming, a rubber hammer, a trowel, a rope, a broom, and also a channel.

The example uses paving slabs, the thickness of which is 50 or 60 millimeters. You can use for this purpose curb, which additionally ennobles the appearance of the path. Prepare crushed stone, the fraction of which can vary from 20 to 50 millimeters. He, too, often remains after construction works.

Garden paths with their own hands from the materials at hand, the photos of which are presented in the article, are made using a construction dry mix for plaster, which can be replaced with cement of grade M400 or M500. You will need geotextiles and sand.

Technology of work

At the first stage, planning should be carried out. It involves the creation of a scheme, the definition of the method of laying and the shape of figured items. The next step is to perform the markup. If you want to ensure proper packing, then it is important for you to implement these actions with the highest accuracy. To do this, use rope, tape measure and pegs.

Garden paths with their own hands from the improvised materials, photos of which are presented in the article, are made using marking tools, this will allow to correctly determine the boundaries of the future track. After the markup is done, prepare the base. To do this, the soil is cut to a depth of 20 cm. If the soil is clayey, drainage may be required.

At the next stage, a gravel or sand pillow is created. It will be necessary to pour and concrete screed. Between the rubble and sand is laid geotextile, which makes the construction more durable. When garden paths are arranged with their own hands from improvised materials, then using a paving slab, you need to lay the top layer, which will consist of a dry building mix. It can be prepared independently using cement and sand. The layer of the mixture should have a thickness of 4 cm. The surface is well leveled with a channel and rake.

Laying tiles

When installing pavement products, you must move away from yourself, which will prevent damage to the laid foundation. Products should be mounted most tightly, the gap between them should be equal to 2 millimeters. Each product must be tamped with a wooden kayak. When garden paths are made by oneself, the forms of such elements of a landscape plot can be very diverse. However, the surface must be leveled by the building level. To adjust the individual elements, you should use a rubber mallet. First you should use whole products, only after you need to lay the missing elements.

Concrete walkway

If you want to lay out the garden paths with your own hands with low costs of concrete, then the preparation of the substrate should be carried out according to the technology described above. However, after laying the pillow, you must install the formwork, as well as lay the reinforcement. Further, the concrete solution is poured, as well as the leveling of its surface. In the process of drying the monolith it is necessary to cover it with wet burlap and water every day. This is especially true of those tracks, the construction of which was carried out in hot weather.

Path from plastic bottles

You can make garden paths with your hands from plastic bottles. To do this, use the technology that was described above. We are talking about wooden saws. The process remains unchanged, but instead of wood, plastic containers will be used, which are installed upside down. As a result, it is possible to get a track with a very unique appearance.