How to make a moped out of a bicycle: the features of the process

Both the bicycle and the moped are very comfortable vehicles. The fact is that their service is not expensive. However, to date, many are interested in how to make a moped out of a bicycle. To do this, you need to find the right parts.

So, first you need to determine the frame of the product. It must be firm and unbending. Therefore, it is better to give preference to the base from a mountain bike made of aluminum. It can be foldable. However, if you are going to travel on rough terrain, it is better to choose a titanium frame. If you do not know how to make a moped out of a bicycle, do not worry, since this procedure is not difficult. First, find the scheme by which you will install all components on the structure. There are countless numbers on the Internet.

Now pay attention to the body kit. Best of all, if it will be at a high level. In order that such a miracle of technology could go, it should be equipped with its engine. And the "heart" of the design can work on gasoline or electricity. The second option is simpler and easier, since it does not require a fuel tank. However, if you do not know how to make a moped from a bicycle that will drive on gasoline, select the engine from the garden equipment. Pay attention to the number of revolutions and the weight of the device.

Mount the engine over the front or rear wheel. Next, you need to provide a place for a gas tank or electric battery. Naturally, it is installed on the front of the frame. Before you make a moped from a bicycle, go to the technical stores, because there can be sold already ready-made kit for installation.

Now go to the gearbox installation. The simplest option is the usual not too rough circuit, which connects the wheel and the engine directly. You can, of course, install a variator that will not reduce engine power. As for the clutch, it's better if it's automatic centrifugal. In principle, how to make a moped out of a bicycle - it is clear, it is only necessary to properly select the necessary mechanisms. For example, when choosing a motor, pay attention not only to its power, but also to the noise level it will emit.

The operation of such a system is simple enough: a belt or chain is attached to the sprocket, which are mounted on the engine pulley. When he starts to work, the bike starts to go. In order to start the engine, a pedal can be used.

Homemade mopeds from a bicycle can be quite convenient transport. The fact is that they do not consume much energy, are not difficult to maintain and repair, and do not require the driver's rights. In addition, the cost of such a design can be quite low, which makes this technique popular.

The electric version of such transport is more profitable, cheaper and safer. All mechanisms are mounted on special fasteners, which can be bolted to the frame or welded to it. That's all the features of making a homemade moped.