Fishing mugs: the design and technique of fishing. Pike Mugs

Pike fishing with the help of circles is one of the most common ways. It is actively used by experienced fishermen, keen on catching predatory fish, and those who have at their disposal a personal swimming device. The greatest effectiveness is achieved by knowing the exact habitats of fish.

Description

Pike mugs are a unique device for fishing, its effectiveness is ensured by the possibility of installation in those places where any other tackle is useless. In addition, this method does not require any special labor, as, for example, the use of a conventional rod or spinning. The cost of adaptation is made up of the price of several elements - sinker, fishing line and hooks.

Advantages

Wooden fishing mugs have many advantages. They do not move so quickly over the surface of the water when exposed to wind, as foam plastic counterparts do. Also, very rarely there are false reversals. This is due to the sufficient weight of the structure, preventing the trigger on the movement of the bait. Given the small penetration into the water, they can move along the current, even if the wind has the opposite direction. Fishing mugs made of wood are characterized by a slow movement along the lake or river, at this time the resident is trying to hide in the nearby depressions and snags located on the bottom. It is in these places that the pike expects its prey.

Devices can be equipped with special anchors and installed in those places where the predator most often appears, for example, above the desks or on the stern tables. Addition in the form of an antenna allows you to simultaneously move all devices against the flow and direction of the wind.

Materials

Mugs for pike have a resemblance to a floating zharlitsey. It is the property of buoyancy that ensures high efficiency. The device is characterized by a simple design, while it is possible to make different versions on its own. The basis is a disk, for the production of which materials such as:

• Plastic or metal can;
• Wood (best suited linden);
• Pressed cork;
• Polystyrene.

The dimensions of the tackle are within 20 cm. It is necessary to make a groove with a depth of about 20 mm along the circumference of the circle, it is needed for winding the line. In the middle, a cone-shaped hole is cut out, its width in the lower and upper part should be different by 5 mm. It is used to place a peg of the appropriate shape. With the help of special cuts, a tightening of the line is ensured.

The mechanism of action is as follows: on the device a fishing line is fixed and carried through a special groove located on the peg. Pike, in the process of biting, pulls on himself a fishing thread, which turns the tackle and notifies the fisherman.

Products from foam plastic

A modern assortment of various materials for the self-manufacturing of devices opens up vast opportunities, while their cost is affordable for everyone. The simple design of the device allows the use of a substrate with different porosity and thickness. Fishing foil 150 mm is one of the most popular options, for its creation is suitable material with a thickness of 2 cm and a fine-pored structure. The metal-plastic tube can act as a pin, the optimum diameter is 15 mm.

The device of a fishing mug from foam plastic

Foam plastic with a high-quality surface is the basis of adaptation. More accuracy in manufacturing can be achieved using a conventional CD or a cardboard template. For cutting the material, an electric jigsaw or a construction knife is suitable.

Particular care is required when cutting a groove, which should be located along the entire circumference and have a depth within 1 cm. To create it, you can use a round file or a knife. A drill with a drill diameter suitable for the dimensions of the tube is necessary to make a central hole.

With the help of fine-grained sandpaper the surface of the disk is processed, then it is covered with a coloring composition. In this case, contrasting shades should be used to color the lower and upper parts to ensure visibility even at a great distance.

Then you need to make two cuts for the line on the upper plane of the device. They should be located on both sides of the circle, opposite to each other.

A piece with a length of 12 cm is cut from the metal-plastic tube, the cuts are cut from the front side.

Many beginners have a question: how to equip a fishing circle? There is no unambiguous answer, because everything depends on the surrounding conditions and preferences of the fisherman. The optimal option will be an addition in the form of a metal leash with a tee, cargo from lead with a mass of about 10 g and a fishing thread with a length of at least 100 cm.

Auxiliary materials

There are different models of gear for pike, which differ in structural design and materials. You can also use the free base, which can be found in every home - a can of canned or condensed milk. Such a non-standard option is quite convenient to use, it does not work for bait jerks and perfectly keeps on the water surface.

In order to make a fishing circle with your own hands, it is necessary to drill a hole with a diameter of no more than 5 mm in the lower and upper part of the tin can. Through them, the wire is pulled and twisted from both sides in the form of a ring. It should be soldered for tight fixation, and this will ensure the sealing of the entire device. Further the structure is covered with a paint of contrasting shades, for example, white and red. A brighter tone is colored one side, equipped with a ring, the other should be less noticeable.

Two rings with a width within 1 cm are cut from the bicycle chamber and put on the jar.

Kapron cord length of about 25 cm is fixed on the rings of wire. It needs to be folded in half and tied so that a loop is produced, with the help of which the bank will turn over during the bite.

On the loop as equipment is attached fishing thread about 5 mm thick, large hook, steel leash and sliding sinker. The construction is wound all the devices and fixed on the ring of rubber.

What you need to know

Every fisherman knows how to use a fishing circle, the price of which depends on the materials used, and is within 100 rubles. But there is a certain algorithm of action that will be useful for beginners.

At the pike's habitat, the hook with the live bait falls to the required depth. To do this, the fishing thread is guided through the mast and pulled into the slots of the base of the tackle. Then it must be passed through the cut in the upper part and pulled from the opposite side of the device through a free slot. It only remains to put the tackle on the water.

Fishing mugs should be on the windward side, as wind and waves will move equipment. In windless weather, you can achieve greater effect by placing in a staggered manner. To prevent tangling of threads, the minimum distance between the tools should be about 15 meters.

How not to miss the moment

It's enough to arrange the devices and watch them waiting for the bite. You can learn about the capture of a predator by overturning them. It is worth noting some features of catching this way:

• Fishing tackle the circle turns over in the event that the pike catches the bait;
• If it starts to spin, it indicates that the predator is sailing with the live bait;
• When the fish starts to swallow the prey, the device will be frozen in one place.

The pike must be cut during the movement of the mug after its brief lull. It is important not to miss the moment, so that the aquatic inhabitant does not have time to hide at the bottom. Fishing of this type of fish has a similarity with sports competitions, in which the one who is able to make decisions on time, has endurance and quick reaction. Getting a trophy is possible only if the correct tactics are observed.

Custom fixture

There are not only fishing mugs, but also square devices. It is worth noting the possibility of changing the force required for twisting, the absence of false positives and low sail. Extruded polystyrene foam is used for the workpiece, as a supplement, a coil, load, tee hook and line are used.

The spool of the device, when mounted on a water surface, must be on top. The thread is fixed in the groove on the surface of the base after determining the required depth. If the pike swallows the bait, the device will turn over, and the line will quickly come off the coil.

Despite the universality of the tackle, its use is possible only in the presence of a boat. It takes a lot of effort and time to install, but the fisherman will immediately be notified of the capture and it will be enough just to pull the prey from the water.