Finishing of slopes of entrance doors: types, materials and features of the process

The new front door is not only a joy for the owner, but also safety for the house. However, the installation of this element is associated with some troubles. For example, finishing the slopes of the entrance doors is an obligatory procedure that makes the opening beautiful and complete. Moreover, it covers all the technical aspects of the installation (cracks, foam).

Installation of the entrance doors of metal - it's quite simple, but a troublesome process, because you will later have to cover the box. It should be noted that there are a lot of ways to design slopes, as well as materials. In order to choose the right material, it is necessary to take into account several nuances: the finish should provide a heat-insulating and decorative function, and it simply must serve a long and high-quality.

Finishing the slopes of the entrance doors is an obligatory element of the installation of the doors. And with the external beauty is easier to understand, because at the moment there are a lot of different materials that will help draw an opening in the right style, take into account the color range and texture. As for the strength of the finish, then it is necessary to choose the material that will not be destroyed under the influence of time or external environmental conditions. So, often for this purpose, a stone is used, as well as a plate of MDF. And both that and other material provides good thermal insulation.

The finishing of the slopes of the entrance doors must be done correctly, otherwise it will not be able to perform its functions in full. With regard to the design of the opening inside the room, then you should use a natural tree or MDF. Do not use plaster, gypsum board or putty to decorate, as these materials are very easy to damage.

Decoration of the slopes of the entrance doors can not do without stacking the insulation under the facing material. Naturally, it is necessary to use the thickest layer that can only be lined. Especially this applies to the metal door, since often there are problems with condensate. It is best to use mineral wool for insulation.

Of course, for the inner and outer sides of the box it is necessary to use the same material in order not to disturb the aesthetics of the design.

Finishing the slopes of the doors can be made and plastic, but it is unlikely that this design will save you from unnecessary problems. The material presented is not particularly strong, especially for the facing of the entrance door. The tree is a wonderful option, but on the outside of the box you will have to process it with special impregnations that will protect it from the influence of external conditions, insects and moisture.

An interesting material for finishing is metal. However, if it comes to the door itself, it is not a fact that it will effectively perform the rest of its functions.

In any case, to design the slopes of the entrance door, you need to consult with experienced masters. Thus, you can avoid installation errors and extend the life of the lining material.