Docke - drainage system: installation, installation, instruction

In the domestic market, Docke products have long been popular. Rainwater system of this manufacturer is made of high-quality polyvinyl chloride, galvanized steel and copper by German technology. The mentioned equipment is produced in the plant conditions according to the European quality standards. Using the system "Duke", you can quickly and easily mount them. And additional advantages are also a wide range of colors, as well as exceptional reliability, which is why the drains of this company are widely used. Having visited the store of the corresponding goods, you can select the system of the given manufacturer in one of two variants, namely: Docke standart and Docke lux. The drainage system can be purchased for internal and external installation.

Why choose Docke

Perhaps you, too, will be interested in Docke products, the drainage system of this manufacturer has many advantages. Among the first can be identified a long guarantee, which reaches 25 years. Installing such a system is very easy, this is one of the main advantages. Some users argue that such devices are almost perfected, and the design is thought out.

The parts are joined by glueless technology, while rubber seals are used , which ensure complete tightness. The design of the chute is symmetrical, which makes it universal, so the plugs at the ends and corners are interchangeable. Fittings and pipes are fixed with a universal clamp, which provides a free fastening and tight fitting fittings. It can be attached to the windboard and use metal extenders for this.

It is no coincidence that Docke products are so popular among consumers today. Gutter system of this company has a negligible weight, if you compare with metal products. The weight of 1 meter of plastic pipe is 0.69 kg. This value is so small that the load from it is almost invisible. This makes it possible to effectively use such systems for reconstructed buildings.

It is impossible not to note the ability of gutters to withstand extreme climatic conditions. They can be operated at a temperature of -50 to +50 ° C. The surface of the material does not fade, and the foliage does not adhere on the inside of the drain elements thanks to the effective Clear Tube technology.

Gutter installation features

If you have chosen Docke products, the drainage system can be installed by yourself. Gutters must be attached to the front plate using plastic brackets. The connector, the funnel and the bracket itself must be fixed to the front plate using self-tapping screws. In the bracket, the chute is fixed as follows. At the first stage, insert the edge of the trough edge into its clamp, which is close to the board. Then it descends into the receiver and squeezes in place of the clamp, this will allow the edge to be made until a click is made.

Brackets should be placed according to the level of the cord, which is stretched between the support and the funnel. The difference in height between these points should be 3 mm per meter. If this method of fastening is used, then the place of joining the roof with the board should be strengthened, this will prevent the pulling out of the fasteners under load from snow.

Mounting method on metal bracket

Gutter system Docke can be installed and without a frontal board, while using metal brackets. This method is used for those roofs that have an insignificant step of the dredging. At the first stage, the bracket is fixed to the roof structure. The edge of the gutter, which is closer to the roof, should be hoisted under the hitch and lowered into the receptacle. The clamping bar is bent and reinforced by the opposite edge. The height difference can be ensured by bending the bracket. As the brackets are removed from the final one, the step between the bend point and the end of the bearing should be reduced.

Using an extension cord and plastic bracket

This option is used for roofs, which are lined up with a large step of the dredging. Lines of extensions and folds should be located at an equal distance. The folding position should not be closer than 1 cm from the point at which the clamping plate of the bracket is fixed.

Features of the drainage system

When installing a drainage system Docke, the question arises as to how to ensure the necessary position of the elements relative to the roof. The overhang of the roof must be above the gutter at a distance that is 30 to 50% of its diameter. The gap should be kept between the support, the roof continuation line and its upper part. Its width can be from 25 to 30 mm. The gap can be provided by the method of bending the extension cord or moving the plastic bracket.

With vertical loading, the masters often solve the problem of how to ensure stability against deformation. For this, the distance between the brackets must not be more than 600 mm. The funnel should be fixed at two points, and the groove connector is strengthened at one point. The pitch between the end part of the corner element and the closest bracket should not be more than 150 mm. The distance between the near bracket and the plug must not exceed 250 mm.

Installation Instructions

Docke drainage system, the installation of which provides for compensation of temperature expansion, should be installed taking into account the distance between the structural elements and the surface of the plug in 30 mm or more. The gutter should be located in the mating elements up to the inscription, which reads: "Insert so far". For the convenience of installation along the edges of the lines, there are micropores. The mating surfaces must be cleaned from contamination before starting the installation. Sealing pads should be firmly seated in the nests, bringing them to the brim. It is also important to install the stubs.

Customer Reviews

Gutter systems Docke, reviews of which are often only the most positive, are able to withstand the impact of an external aggressive environment. Such a characteristic is not capable of boasting other materials that form the basis of modern systems of such designation. Consumers note a fairly strong connection between the knee tubes and an impressive diameter, which ensures their high throughput.

There are also disadvantages. As the buyers emphasize, they are expressed in the fact that PVC is not sufficiently durable material, among its minuses - low strength. It can be sensitive to impacts and physical influences. However, you can be sure that if water inside the system is frozen, then it can not damage the pipe.

Conclusion

If you are interested in the drainage system Docke, the installation instructions of which have been described above, then you can compare it with metal analogs. The latter are not able to restore the shape after loads. Consumers claim that dents remain on such surfaces, which can not be said for plastic troughs, after all loads they are able to fully restore their original shape while remaining intact. In this case, metal trenches can not be accidentally broken.