HomelinessTools and equipment

Sigma Tile Cutter: description, instruction and reviews

Ceramic tiles today are one of the most common finishing materials, because it has practicality, durability and attractive appearance. It can be used in almost any room, combining with other materials. In addition, it is not so expensive solution. But if you want to save even more, you can resort to self-tiling, refusing professional help. To carry out this kind of work, you need certain skills and tools, the last of which is a tile cutter. This device is the easiest and most necessary to work with such a lining.

Right choice

When choosing a tile cutter a lot depends on the quality characteristics of the tile, so you need to buy it first, and then start choosing a tool for cutting. First of all, it's important to pay attention to the producer, who should have a positive reputation in the market of the corresponding goods. Sigma, for example, today is a fairly common tool among consumers. About it and will be discussed below, more precisely, about some models of this manufacturer, having familiarized with which, you can make your choice.

Description of hand-held tile cutting machine Sigma 2G SERIE 3

The 2G SERIE 3 Sigma tile cutter is a hand-type model that is capable of providing a height and a cutting length of between 15 mm and 37 cm, respectively. The manufacturer supplied the tool with a movable separator, as well as a roller cutter, whose diameter can vary from 6 to 12 mm. This model is quite light and compact and is intended for cutting "from oneself". This allows the master to perform clear movements, making the cut more accurate and faster.

Uncover with the help of this device you can tile, the thickness of which reaches 15 mm. When cutting, efforts are applied up to 600 kg. Small dimensions do not prevent you from making a cut to a significant depth, which is why you can purchase a large tile. The ease of use increases the availability of a measuring ruler, located close to the master. On the ruler, you can find two scales, as well as a handle for fixing.

The range of rotation angles of the ruler can vary from -45 to +45 °. If your activity is related to the professional laying of tiles, then for sure you often need to transport tools and related equipment, is not an exception and a tile cutter, which before transport can be prepared by fixing the ruler on the body.

Additional features

The Sigma tile cutter of the above brand has a patented rapid rail height adjustment system, this parameter will depend on the height of the tile. The handle on the rail will move fast enough and accurately due to the presence of a ball bearing system, they are equipped with a handle-separator.

As an additional feature of the model, it is worth highlighting the possibility of a quick replacement of the separator. The desktop is spring-loaded, so you will feel a damping effect when the material is cut out. This significantly reduces the rigidity of cutting, which is important when using brittle materials. The tool has a roller cutter, which is made of tungsten carbide. Its diameter is twelve mm.

Instructions for use of the Sigma hand-held tile cutter

Cutting tiles with a manual tile cutter does not provide the master with special skills. The tool must be checked for visible damage before use, the cutting roller must rotate without difficulty. Its surface must necessarily be correct, as well as devoid of potholes and burrs. Carriage movement should be carried out without jams and jerks. For this, a radial bearing is provided.

It is necessary to check the condition of the bed, its surface must be free from visible contaminants. Before you are done cutting the tiles, its surface must be marked with a pencil, following the required dimensions. The product is placed on the frame in such a way that the marked line coincides with the trajectory of carriage movement. The distance from the cut from the edge of the tile should be about 10 mm, otherwise a neat edge will not be obtained. Carriage should be carried out along the marking with some pressure, at the moment you should feel the necessary intensity of pressing. This is to ensure that the tile is not pressed, the glaze should be cut.

You can roll over the surface only once, otherwise the cut may turn out to be uneven. Now the handle should be turned to the working position, after that, it falls off abruptly, as a result, the product breaks along the cut. Before you use the tile cutter, it is recommended to soak the ceramic tile, as this greatly simplifies the cutting. Along the cutting line, you can apply a drop of oil, this will make the movement of the working surface of the tool easier.

Reviews about a professional monorail tile brand Sigma 3BM

Tiles professional brand 3BM can be purchased by you for 12,500 rubles. According to users, the tool is extremely powerful, because its separating force is 1150 kg. While a minimal effort should be applied from the operator, the result will be a high accuracy cut. The tile cutter, whose price is mentioned above, can cut relief and very hard thick materials. Such a high power is combined with the smoothness of the cutting and smoothness, it became possible thanks to the handle-separator.

According to users, the length of cutting is 60 cm, while the diagonal is 42x42 cm. According to customers, the table is quite wide, this parameter is limited to 34 m. The cutting system "from oneself" today is also quite widespread, this is confirmed by multiple reviews from Hand professionals. The described tool is a good tile cutter, according to the specialists in laying the tile, because with a small movement of the separator you can transfer it from the cutting position to the separation position. The ruler rotates, it is centered, so it can be quickly fastened at any angle. The tool has a special button that allows you to immediately fix the ruler at the used corners. For convenient movement, the ruler is fixed on the platform along the rails.

Description of Sigma 2D4 tile cutter

The Sigma 2D4 tile cutter is a professional hand tool, you will have to pay 17340 rubles for it. The cutting length can reach 610 mm, while the thickness of the cut is 22 mm. The weight of this equipment is 8.2 g. The tile cutter, the price of which is mentioned above, belongs to the TECNICA series and is intended for cutting tiles with a thickness of up to 22 mm. The power is 800 kg, and the master has to be cut while moving the working part from himself. The ruler is equipped with a double scale, it rotates and is centered, and also provides high accuracy of cutting. This Sigma tile cutter is equipped with a 16 mm roller, as well as a limiter that allows serial cutting. The desktop is spring-loaded, which, according to customers, is a necessary functional.

Description of Sigma hand-held tile cutting machine mark 7A

This tool is a hand-held device with a cutting height of 12 mm. The length of the cutting is 33 cm. The diameter of the roller cutters can vary from 6 to 12 mm. Included is a case. This tile cutter manual Sigma is designed for cutting porcelain tiles, as well as ceramic tiles. The strength of the separator is 500 kg, and at the base of the incisors lies titanium.

Conclusion

If you need to cut holes, it's best to abandon the Sigma 7A model, as there is no such functionality here, as well as an integrated swivel ruler, as well as a quick-change handle system.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.