HomelinessDo it yourself

Double beds with their own hands: a simple build algorithm and possible creative solutions

Double beds can be made by their own hands . It's twice cheaper and not long (a couple of days). And how, from what, let's see ... It will take a cutter for holes and screws for fastening parts, bolts, when you need to fasten the parts from the outer, visible side. And also vinyl adhesive for greater reliability of fastenings (details are smeared in places of a joint).

  1. Without a drawing, no "initiative" should begin at all. In it, you reflect both the sizes, and proportions, and additional details (for example, shelves). Drawing will guarantee a perfect (or almost perfect) hand work.
  2. Like any other construction, the double beds are constructed on the basis of the carcass with their own hands. We will make it from 4 thick (3 cm) wooden beams, preferably from pine. We connect them with screws and get a rectangle, the length of which is equal to the length of the future bed, and the width, respectively.

Be sure to strengthen it along the entire length. Otherwise, your wooden bed, assembled with your own hands , will not last long with its reliability. For a solid body, four beams are not enough. Parallel to the base of the bed (back and head) we will strengthen three more, evenly distributing them along the length of the rectangular frame.

  1. We nail the legs. For them, take the wooden beams (preferably from oak, only it will withstand such a load) of the required height and thick enough.
  2. All the resulting construction must be sanded and varnished.
  3. On top of the frame with screws is screwed the upper dense layer of plywood 1 cm thick.
  4. The bed is clogged with a cloth, a thin layer of foam is put under the cloth in sharp places, it is possible and along the entire perimeter. The fabric is attached to the wooden frame under the bed by any improvised means of reliable means, the buttons are also fit, but as additional fasteners.
  5. Remains the head of the desired shape and colors, as well as the back (in the legs), if such is planned. Backs can be found in the building store such that the bed fits perfectly into the interior of your bedroom. And you can order the masters. You instantly saw out the backs of plywood of any shape you say. Screw the head bolt, and as they will be seen from the outside - choose "more attractive" (on sale there are specially designed for these purposes, decorated bolts).
  6. A mattress for a bed is either purchased in the store after the bed has been measured, or is made of its own necessary length and width also from foam rubber lined with a strong cloth.

So, now we know how to build a double bed with their own hands. It remains a matter of small - to implement the most daring of his drawings, without deviating from this algorithm of action.

Carrying out these successive steps, you can plan, as mentioned at the beginning of the article, the construction of additional details. Double beds are decided by their own hands for the sake of the embodiment of such original ideas. For example, they construct boxes of the necessary length and width inside the frame, which would include all the sleeping accessories. What can not be said about the crates of beds and sofa beds, sold in the salons of furniture. There you can clean out of sight only bed linen. But what about pillows, mattresses and blankets ... Or drawers on wheels that slide out of the sides of the bed ... What else can you think of?

The transformer bed can also be made by hand, but more difficult. You can create a design that changes from bed to table or cabinet. There are also multi-story beds-transformers for the children's room (the number of beds is changing). The easiest way to make a bed-table. It is a construction of a frame, a sheet of plywood and legs. Clean the bed with a mattress - and this is the table. It will look more like a transformer of a rounded shape. You can not buy a mattress for such a bed, but you can make it yourself from foam rubber.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.