Cement plaster and its application

Everyone knows that plaster is used as a material to level brick, concrete and gypsum surfaces. The plastered surface usually needs to be finished with decorative plaster, paint or other finishing materials. What material to use for plastering walls, depends on the subsequent finishing, as well as financial capabilities. The most suitable option in many cases is cement plaster.

Work on plastering surfaces can be done manually or by means of special equipment. Cement plaster can be applied without subsequent finishing, but usually this option is used in industrial buildings. We will apply this material also for external works. Cement plaster is prepared on the basis of cement, sand, and also a small amount of lime. This type of plaster is very popular among developers. Except for external walls, this material is expedient for using for finishing of entrances, stair flights, basement rooms, offices. Cement-based plaster is often used in finishing shops, corridors of public buildings, supermarkets and apartments, since such a wall covering perfectly resists damage.

This material is the best option in cases where it is necessary to align the walls and prepare them for further processing. With its help eliminate interlacing swings, depressions, bumps and waves. Cement plaster will give an excellent result, which will allow timely start finishing work. It can be used for leveling walls not only in new, but also in old houses. It turns out that the plaster on a cement basis are applicable not only for wall finishing, but also for repair work. It can be used for renovation of masonry seams, repair of window slopes, sealing joints of concrete slabs.

The use of such material will make you feel completely confident that everything was done correctly. Cement plaster is very versatile, and the prospects for its use in various construction areas are impressive. Its plastic properties allow to provide a dense and high-quality adhesion to the surface. The layer obtained as a result has excellent water resistance, vapor permeability, resistance to cracking, frost and atmospheric factors. All these properties make it possible to guarantee the high quality and reliability of the coating obtained.

It is quite easy to prepare cement plaster, but this process will require accuracy and attention during work. The proportions should be observed as accurately as possible, and the components should be mixed until uniform. The solution should be allowed to stand for 5-10 minutes after stirring, then mix again and start to work. It is necessary to produce a solution in no more than two hours.