Wisteria of beads. Master class for beginners

Beading is not only an exciting activity, but also a way to create with your own hands something beautiful and unique. Experienced masters can easily perform even the most difficult work. Such, for example, as wisteria from beads. This tree itself is delicious, and made of glass small beads, it acquires a magical, dreamlike appearance.

For those who do not yet have enough experience in this matter, we will give a detailed master class. Wisteria made of beads is made with the help of the following materials:

- green beads for leaves - about 100 g;

- For brushes it is necessary to choose beads white, pink (it is possible various shades) and lilac - only 80 g;

- glossy beads: yellow - 5 g, pink - 15 g;

- green and silver wire, the diameter of which is about 0.4 mm;

- green beads melange - 10 g;

- Rods with a diameter of 0.6-1 mm (for the trunk);

- gypsum architectural;

- threads of mulina - 2 rolls;

- glue;

- Acrylic paints and colors;

- decorative stones, moss, grass, sand.

So, we proceed to create such a man-made miracle as wisteria from beads.

1. First with a hand-rubbed brush. For this, six beads are strung on a thin wire. Then tightly turn them into a noose. Now twist the ends of the wire to fix the element. Further we work only with one tail. All elements are paired, that is, you need to make two identical loops. They consist of:

- 7 lilac beads;

- 6 pink beads, between which we sew 3 lilac;

- 10 pink beads;

- 8 light pink, between which we string 4 pink;

- 12 light pink beads;

- 13 white beads.

Similarly, loops are made on the other "tail" of the wire. We twist it after each element. The hinges must be arranged in a mirror. But this is not all the wisteria from beads, but only a separate brush. We need 32 such.

2. Now we rub the leaves. Wire diameter of 0.4 mm is not cut off from the coil and thread on the free end of the green beads. Each loop consists of 10 beads. At the same time, it is necessary to retreat 10 cm from the edge of the wire. In total, 11 elements must be made. We twist the leaves in exactly the same way as the flowers. You must create 32 sheets.

3. Then start to collect small twigs. We connect pairs of leaves and brushes.

4. Now collect the larger branches. As a rod, we use a wire with a diameter of 1 mm. We wind on it two small twigs. At the same time, the trunk must be wrapped around the floss. The next four branches are attached to the rod, having receded from the first one centimeter. We create four such large branches, and in the fifth we add a couple of small twigs.

5. We collect the tree. Now for the rod it is necessary to take a wire with a diameter of 3 mm. Make the top: attach to the trunk of two branches, which consist of six small. We also wind the tree with a moulinet. Below we tie up another one of the same branch. Each of the two remaining threads are wrapped in threads and in turn we attach to the rod - first a large one, and then a smaller one.

6. Now for our tree we make a stand made of gypsum, a wooden block or other material. That at this time we do not interfere with the branches, we wrap them with foil. We make a solution of alabaster and PVA glue, mixing them in equal parts, we smear the trunk. When it dries, gently paint all the branches and trunk.

7. The final stage is the decoration of the stand. For this, we paste moss, pebbles, grass and sand on it.

Everything, magnificent wisteria from beads is ready! It remains only to remove the foil from the brushes, spread them and fluff.