AutomobilesCars

Tuning "Moskvich" 2140 - revision of the Soviet legend

Tuning "Moskvich" 2140 is an improvement of technical qualities and characteristics of the famous Soviet car, which literally became a legend. Many old domestic machines no longer get along in the era of new technologies, but lovers of improvements do not allow them to die and give a second life.

External tuning

Tuning "Moskvich" 2140 with their own hands begins to be performed with improved body characteristics. The body of the car undergoes major repairs and only after that it will be improved. The bonnet is fitted to the bonnet, which will further cool the engine.

The outer weather cloth and plastic thresholds can be purchased at the store or made from fiberglass itself. The installation of the front and rear bumpers is carried out on the regular mounts of the Moskvich car 2140. Tuning (photo presented in the article) is considered optimal from fiberglass, because the cost of the material is low, and it is easy to work with it, even if the parts are made by hand.

Plastic thresholds are glued to double-sided adhesive tape. To install the wing, drill holes in the boot lid. Next, the bolts need to be fixed to the spoiler, but before that, clean the holes of corrosion.

This tuning "Moskvich" 2140 does not end. Then on the standard seats you need to pick up and mount rear-view mirrors. Also, there will be a mirror in the cabin, which over the years has become covered with black spots around the edges.

Before starting aerographic tuning, "Moskvich" 2140 (the drawing surface) is covered with a matte layer. After that, if necessary, the paint is applied and applied.

The technology of completion of "Moskvich - 2140 Lux" is similar. The cars are only slightly different from the outside, although each individual radiator grill, therefore, is selected separately. Also, the radiator frame can be made by hand.

Salon

If you decide to change the salon, the tuning "Moskvich" 2140 begins with the fact that the interior of the car is completely disassembled. The instrument panel can be glued with a special color film or replaced with an alternative one from "Now Vectra B".

The seats in the performance of tuning 2140 are subjected to a constriction with a cloth Alcantara. The color scale of this material allows you to choose the right color in the tone of the interior and body. Next, there is a constriction of the ceiling and side racks. The rear shelf, where the speakers are attached, is being reworked. Seats can be replaced by the same, but with another car.

The final development is the installation of a multimedia center and a subwoofer in the luggage compartment.

Engine

By car "Moskvich" 2140 tuning engine should be done completely, since the machine is devoid of electronics, then there are two options for refinement: the first is the tuning of the mechanical part, the second is the complete replacement of the power unit along with the gearbox.

In the first variant lightweight pistons, a camshaft, repair inserts, valves with a thin facet, the increased saddles are established. All these refinements can be done with their own hands, except for the boring-honing unit. Installing a turbo, you can increase power by 10%, and if you add a system of water injection through the carburetor, you can achieve and 25% with a fuel economy of 15%.

In the second option, the place of the old motor is set to the Opel 2-liter engine. This refinement requires some modifications in the power supply, cooling and exhaust systems.

"Moskvich-2140 Lux" has the same technological procedure for tuning the engine, except that you can not replace the valve and seat, because they are not on sale. The independent production of these parts on a lathe can be a way out of the situation.

Suspension

To improve the suspension, stabilizers of longitudinal traction are installed, which they make with their own hands on "Moskvich 2140". Tuning (photo of the converted machines is presented below) is that it is necessary to replace all the Zhiguli shock absorbers, and also to install the forged low springs in order to reduce the clearance.

Disks and tires in this case are selected, according to the stripping. They can both increase and reduce ground clearance. Tuning version of rubber has a size of 185 / 60R15. Also, by replacing the hubs and installing the 5x100 spreader, you can install chrome wheels from Kragar, which will allow the car to always be stylish and recognizable.

Brake system

Tuning "Moskvich" 2140 in the brakes is more than justified. As you know, all cars of this brand had a bad braking system. Replacing the brake discs and shoes from the company "Brembo" will improve the quality of the brakes. In passing, you will have to replace the cylinders to make the brake part ideal.

The parking brake comes from the ATI manufacturer, which has proven itself in the domestic spare parts market. When installing the handbrake and cables, you do not have to redo anything, you just need to put them in place of the regular parts.

Improved steering gear

"Moskvich" 2140 from the factory was supplied with an insufficiently reliable steering gear. So, after traveling 5-7 thousand km, the driver noticed that there was a backlash on the steering wheel, which was associated with bad quality of the tips. Tuning masters usually instead of the standard steering mechanism installed Zhigulevsky from the VAZ 2107. This required some constructive changes.

At the beginning of the 21st century, with the introduction of a large number of parts from various countries to the domestic market, motorists began to install the steering gear from Chery Amulet on the Moskvich 2140 as a refinement. This allowed to improve the stability of control and purchase an old car power steering.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.